DMX-RELAIS 2The DMX-RELAIS 2 is designed for switching loads of several kinds.Two potential free switching outputs2 potential free switching outputs up to 8A switching capacity are available.Switch per relayThe switching contacts are designed as changeover switches and can switch resistive loads.Switching contact for direct and alternating voltageThe version is suitable to switch resistive loads using direct voltage (DC) oralternating voltage (AC).For voltages from 12V up to 24VThe DMX-Relais 2 works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 the DIN rail housing 700 is available as accessory. Specifications  Power supply:12-24V DC / 250mA (150mA@12V / 100mA@24V)  Protokoll:DMX512 RDM  DMX-Channels:1 or 2 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl  Output:2 potential free switching contacts DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph  Connectors:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2Bedienungsanleitung DMX-RELAIS 2User Manual

 DMX-RELAIS 2 INRUSHThe DMX-RELAIS 2 INRUSH is designed for several control tasks.Two potential free switching outputs2 potential free switching outputs (closer / NO)up to 8A switching capacity are available.Switching contact for direct and alternating voltageThe INRUSH version is suitable for control direct or alternating voltage.For voltages from 12V up to 24VThe DMX-Relais 2 INRUSH works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 INRUSH offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 INRUSH the DIN rail housing 700 is available as accessory. Specifications  Power supply:12-24V DC 150mA@12V / 100mA@24V  Protocol:DMX512 RDM  DMX channels:1 or 2 channels  Output:2 switching contacts (165A/20ms Switch-on peak current) DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl  Connectors:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2 INRUSHBedienungsanleitung DMX-RELAIS 2 INRUSHUser Manual

 DMX-RELAIS 8 INRUSHThe DMX-RELAIS 8 INRUSH is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct voltage (DC) or alternating voltage (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Several operation modesThe DMX-RELAIS 8 INRUSH offers several operating modes which can be set via RDM:- Hysteresis 127/128- Hysteresis 0/1- Hysteresis 100/150- Exclusive- Monostable 1SecondTop hat rail mounting availableSuitable for the DMX-RELAIS 8 INRUSH the DIN rail housing 1050 is available as accessory.Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation. Specifications  Power supply:12-24V DC (280mA @ 12V / 180mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Connectors:screw terminals  Dimensions:99mm x 82mm Product DownloadsDMX-RELAIS 8 INRUSHBedienungsanleitung DMX-RELAIS 8 INRUSHUser Manual

 DMX-RELAIS 8 INRUSH+The DMX-RELAIS 8 INRUSH+ is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (Closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct current (DC) or alternating current (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD) orto adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH+ allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.Touch-ControlThe DMX-RELAIS 8 INRUSH+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status displayVia a RGB status display the DMX reception is shown.Mute able LED-DisplayThe LED-Display at the DMX-RELAIS 8 INRUSH+ can be switched off via RDM command or time-controlled,so that no disturbing light sources are present during operation.Several operation modesThe DMX-RELAIS 8 INRUSH+ offers various operation modes. Specifications  Power supply:12-24V DC (300mA @ 12V / 200mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:up to 8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Display:7 segment display RGB LED  TOUCH-Control:3 touch buttons  Connectors:screw terminals  Dimensions:105mm x 90mm x 60mm Product DownloadsDMX-RELAIS 8 INRUSH+Bedienungsanleitung DMX-RELAIS 8 INRUSH+User Manual