Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungstechnik basierend auf dem ARTNET,DMX512 und RDM Protokoll.

Are you interested in the wide range of innovative DMX and LED technology?
Then we welcome you to DMX4ALL and invite you to explore our website and discover our carefully curated selection of products.
All of our in-house products are developed in Germany and manufactured entirely in-house.
Let yourself be inspired!
We look forward to hearing from you!

IEC62386 (DALI) PSU30The IEC62386 PSU30 BUS power supply is an accessory for the DMX-IEC62386 Gatewaywhich can supply up to 30 bus participants. There is no need for an external power supply, as the DMX-IEC62386 Gateway has anown slot for the specially developed IEC62386 PSU30 BUS power supply. Specifications Power supply:5V DC from DMX-IEC62386 Gateway Bus system:IEC62386 Max. output current:60mA (for 30 bus units each 2mA) Connections:Female connector 1x2pin 2,54mm Female connector 2x5pin 2,54mm Dimensions:23mm x 35mm Produkt DownloadsIEC62386 PSU30Bedienungsanleitung IEC62386 PSU30User Manual
Delivery time: On stock (estimated 1 day)

DMX-PWM 8The DMX-PWM 8 is a small PWM decoder providing 8 independent PWM signals with 5V amplitude to control several power levels.8 PWM-OutputsIn total 8 independent PWM signals are available.5V AmplitudeThe PWM signals have a 5V amplitude (0V / 5V signal).0% – 100% Pulse control factorThe pulse control factor of the outputs is between 0% up to 100% via DMX with a resolution of 8 Bit adjustable.Outputs invertibleThe Personality can invert the outputs, within the SubDevice-Mode even each output itself.SubDevice-ModeWithin the SubDevice mode, each output has its own DMX address, operating mode (inverted/non-inverted)and DMX FAIL behavior via RDM.Compact DesignThe design and the compact structure allow an installation of this small assembly in areas with limited space.LED-DisplayThe integrated LED is a multifunctional display to signal the current device state.DMX AddressingThe DMX-Addressing occurs via RDM or prioritized via DIP switches.RDM SupportWith RDM via DMX the DMX-PWM 8 provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Lockable Device SettingsThe RDM parameters Lock Pin and Lock State allow or avoid changes to stored RDM parametersin order to safe against unauthorized modifications.
Delivery time: On stock (estimated 1 day)

DMX-LED-Dimmer MaxiRGB RDMThe DMX-LED-Dimmer MaxiRGB RDM is especially designed for controlling the RGB LED-Stripes with 12V or 24V.3 LED OutputsA total of 3 independent LED outputs are available.RGB or single-color stripsThe three separate LED outputs, which can be controlled independently via DMX, can be used for RGB or individual single-color LED strips.0% – 100% dimmableThe outputs are dimmable from 0% to 100% via DMX with 8-bit resolution.Compact designThe design and compact form factor allow this small assembly to be installed in areas with limited space.Status LEDThe integrated LED is a multifunction LED that displays the current device status.DMX AddressingDMX addressing is performed via RDM or, with priority, via a DIP switch.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of loss DMX signal the current state (HOLD)or predefined a preset value.DMX master dimmerOptionally, an additional DMX channel can be activated as a master dimmer for all outputs.Einstellbare Ausgangsfrequenz The output frequency at the LED outputs can be switched between 240 Hz and 980 Hz via RDM.SubDevice-Mode In SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.RDM Support The DMX-LED-Dimmer MaxiRGB RDM allows configuration by RDM via DMX.Lockable device settings The RDM parameters Lock Pin and Lock State allow or prohibit the modification of stored RDM parametersin order to prevent unauthorized changes.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is available to download from our website www.dmx4all.de. Specifications Power supply:12-24 DC / 50mA (without connected load) The supply voltage must correspond to the voltage for the LED stripe! LED voltage:12-24V DC (no AC voltage !) DMX Input:DMX512 LED Output:3x (R/G/B) max. 10A each together max. 10A with common anode (+) common power supply PWM resolution:256 steps (8-Bit), linear PWM duty cycle:0-100% PWM frequency:240 Hz / 980 Hz Connectors:1x screw terminal / 2-pole 1x screw terminal / 3-pole 1x screw terminal / 4-pole Dimensions:70mm x 30mm Product DownloadsDMX-LED-Dimmer MaxiRGB RDMBedienungsanleitung DMX-LED-Dimmer MaxiRGB RDMUser Manual
Delivery time: On stock (estimated 1 day)

LED-Dimmer DR4The LED-Dimmer DR4 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4 offers more than 10 user defined color changes.These can be created via the web browser.RGB-LED-DisplayThe RGB LED displays the current operation status of the LED-Dimmer DR4 clearly.Mute able LED-DisplayThe LED-Displays at the LED-Dimmer DR4 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or AppThe output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4 is controlled via Art-Net™, the DMX port can also be configured as a DMX output.RDM Support With RDM via ArtNet or DMX the LED-Dimmer DR4 provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Top hat rail mounting The top-hat rail housing 700 is available as equipment for the LED-Dimmer DR4.Firmware-Update-FunctionTo use future functions the LED-Dimmer DR4 offers a Firmware-Update-Function.Easy configurationA user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-InterfaceThe LED-Dimmer DR4 has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
Delivery time: On stock (estimated 1 day)

LED-Dimmer DR4FThe LED-Dimmer DR4F is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).Low-profile DIN-rail housing The LED-Dimmer DR4F is designed as a FLAT version, featuring a low-profile DIN-rail housing for space-saving installation.High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4F offers more than 10 user defined color changes.These can be created via the web browser.Mute able LED-DisplayThe LED-Displays at the LED-Dimmer DR4F are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or AppThe output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4F is controlled via Art-Net™, the DMX port can also be configured as a DMX output.RDM Support With RDM via ArtNet or DMX the LED-Dimmer DR4F provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Firmware-Update-FunctionTo use future functions the LED-Dimmer DR4F offers a Firmware-Update-Function.Easy configurationA user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-InterfaceThe LED-Dimmer DR4F has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
Delivery time: On stock (estimated 1 day)

DMX-IEC62386 (DALI) GatewayThe DMX-IEC62386 gateway is a bidirectional protocol converter combining two devices in onewith its compact design. Depending on the individual application, the DMX-IEC62386 gateway,using a 2-way communication, is able to convert both, the DMX signal into IEC62386 controlcommands and IEC62386 control commands into DMX values.Especially, the reduced size and the “on-board” BUS power supply makes the DMX-IEC62386 gatewaya space-saving and price-optimized all-rounder. There is no need for an external power supply,as the module has an own slot for the specially developed BUS power supply.Overall, the DMX-IEC62386 gateway is a bidirectional protocol converter with an integratedBUS power supply thanks to its clever design, combined with many useful functions that areparameterized exclusively in a decentralized manner via remote device management.Several communicational directionsThe DMX-IEC62386 Gateway can be run as IEC62386-Output device (DMX as input) orDMX-Output device (IEC62386 as input).RDM SupportThe DMX-IEC62386 Gateway allows a RDM configuration via DMX.Supports single-devices and /or device-groups or BroadcastThe protocol converter can send DMX-Signals to IEC62386-Bus-Control-Commands via broadcastor send focused to single devices or groups.Settable DMX-AddressesFor each device or group an own DMX-Starting address can be assigned.Individual DMX-FAIL ActionIn the case of an DMX-Signal fail for each device or each group an individual behavior can be determined.Configurable Working ModeThe working mode defines how to call the connected device or group. The options ARC-Power /%-Power / Color Temperature / RGB / RGB+W / RGB+WA / RGB+WAF are available.OFF as ARC LEVEL or OFF COMMANDWith a dim value of 0% (OFF) the behavior between send an OFF-Command and send an ARC-Level is adjustable.BUS-Command RefreshAn automatic Refresh of the BUS-Command can be activated and is also executed if no DMX signal is present.The execution interval can be change between 10s and 600s.Lockable Device SettingsThe RDM parameters Lock Pin and Lock State allow or prohibit changing saved RDM parametersto prevent unauthorized changes.64 Devices in DMX-ValuesFor all 64 IEC62386-Devices the brightness value is outputted at one DMX-Channel.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.RGB-LED-DisplayA RGB-LED shows the current device status clearly.Firmware-Update-FunctionTo us future functions the DMX-IEC62386 Gateway offers the Firmware-Update-Function via RDM.Top hat rail housing availableSuitable for the DMX-IEC62386 the DIN rail housing 350 or DIN rail housing 350 flat is availableas accessory. Together with the top-hat rail housing 350 or 350 flat, the interface is optimallysuited for control cabinet installation.
Delivery time: On stock (estimated 1 day)

LED-Dimmer DR4+The LED-Dimmer DR4+ is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).DIN-rail housing The LED-Dimmer DR4+ is designed with a DIN-rail housing for mounting on a DIN rail.High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4+ offers more than 10 user defined color changes.These can be created via the web browser.3 RGB-LEDsThe three RGB LEDs clearly indicate the current operating status of the LED-Dimmer DR4+.Mute able LED-Display The LED-Displays at the LED-Dimmer DR4+ are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or App The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4+ is controlled via Art-Net™, the DMX port can also be configured as a DMX output.Firmware-Update-Function To use future functions the LED-Dimmer DR4+ offers a Firmware-Update-Function.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-Interface The LED-Dimmer DR4+ has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
Expected 3–4 weeks