Schrittmotortreiber BRIDGEThe stepper motor driver BRIDGE can be used to connect external stepper motor drivers to the DMX-Stepper-Control.The signals STEP, DIR and ENABLE are bridged by the stepper motor driver BRIDGE to the motor connectionand can thus be used for the control of an external stepper motor driver.Can be used together with our DMX-Stepper-Control.For detailed information, please refer to the instructions for the DMX-Stepper-Control. Technische Daten  Motordriver:none (EXTERNAL)  Connection:2x 8 pin row  Dimensions:15,2mm x 20,3mm  Delivery:1x EXTERNAL DRIVER BRIDGE with presoldered pin row Product DownloadsSchrittmotortreiber BRIDGEBedienungsanleitung Schrittmotortreiber BRIDGEUser Manual

 Schrittmotortreiber A4988Der A4988 ist ein Schrittmotor Treiber mit einstellbarer Strombegrenzung und fünf verschiedenen Microschritt Betriebsarten.Der Treiber ist für Spannungen von 8-35V geeignet und kann einen Strom von 2A per Phase ansteuern.Ersatz Modul für den DMX-Stepper-Control. Technische Daten  Motortreiber:A4988  Arbeitsspannung:8-35 Volt  Arbeitsstrom:2A pro Phase   3.3V und 5V kompatible TTL Signale   Überhitzschutz  Schritte / Steps:Full, 1/2, 1/4, 1/8 und 1/16  Lieferumfang:1x A4988 Stepper Modul inkl. 1 Kühlkörper  

 Schrittmotortreiber TMC2208The stepper motor driver TMC2208 is compatible with the Pololu A4988.The components are mounted on the top with which a heat sink can be mounted for better heat dissipation.Can be used together with our DMX-Stepper-Control.For detailed information, please refer to the instructions for the DMX-Stepper-Control. Technische Daten  Motordriver:Trinamic TMC2208  Voltage:5,5-36 V (Stepper)Voltage:3.3V and 5V (control TTL signals)  Current:1,2A (RMS)   Overheat protection  Delivery:1x SilentStepStick with presoldered pin row 1x Heatsink  

 Schrittmotortreiber TMC2100 SilentStepStickTMC SilentStepStick has a configurable microstep resolution from fullstep up to 256 microsteps.To keep it compatible with other firmware made for stepstick or Pololu board it has a configurable interpolation.Can be used together wit our DMX-Stepper-Control. Technische Daten  Motordriver:Trinamic TMC2100  Voltage:8-45 V (Stepper)Voltage:3.3V and 5V (control TTL signals)  Current:1,2A (RMS)   Overheat protection  Microstep Resolution:1...256  Delivery:1x SilentStepStick with preconfigured pin row for DMX-Stepper-Control