Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll.
DMX-Universal-Demux
€70.08
Delivery time: on stock (1 day)
44 available
The shipping promise only applies to items shown with 
in the online shop and requires payment via PayPal. Order cut-off for same-day shipping: Mon–Thu until 13:00, except on public holidays.
Opening hours: Mon–Thu 08:00–14:00
- Direct from the manufacturer
- ships within 24 hours, Monday through Thursday
-
Made in Germany 
Made in Europe - technical support
Product information "DMX-Universal-Demux"
 DMX-Universal-Demux |
8 outputs with open-collector driver
There are 8 outputs with open collector output driver for controlling external devices.
Voltages from 12V up to 24V
The DMX-Universal-Demux operates with supply voltages from 12V up to 24V.
Different operation modes
By jumper the operating mode of the DMX-Universal-Demux can be selected.
Available are the operation modes Threshold / Binär / PWM / Servo / Strobo.
Controllable via DMX
The DMX-Universal-Demux is controlled by DMX and uses 1 or 8 DMX channels depending on the operating mode.
DMX FAIL-Function
An adjustable DMX FAIL function offers the option to hold the current state (HOLD)
or to change to a predefined value in case of DMX signal failure.
RDM support
The DMX-Universal-DMX allows the configuration via RDM or DMX.
LED status display
The LED status display shows the DMX reception.
DIN rail housing available
The DIN rail housing 700 is available as an accessory for the DMX-Universal-Demux.
| Specifications |
| Supply voltage: | 7-24V DC |
| Current consumption: | 40mA@12V / 35mA@24V (without load) |
| Protocol: | DMX512 |
| RDM | |
| DMX channels: | 1 or 8 channels (depending on adjusted mode) |
| Output: | 8 open-collector outputs |
| max. 500mA | |
| DMX-FAIL: | HOLD / 0-100% |
| Operation mode: | Threshold (switches at 50%) |
| Binary (8-Bit) | |
| PWM (~175Hz) | |
| Servo | |
| Strobo | |
| Monostable 1 Second | |
| Connection: | Screw terminals |
| Dimensions: | 64,2mm x 82mm |
| Product Downloads |
Verantwortliche Person für die EU
In der EU ansässiger Wirtschaftsbeteiligter, der sicherstellt, dass das Produkt den erforderlichen Vorschriften entspricht:
DMX4ALL GmbH
Reiterweg 2A
44869 Bochum
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de
WarningPlease note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Waste disposalElectrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
We recommend the following for this product:
+10 
Hutschienengehäuse 700Module housing for M36-DIN-standard rail. Specifications Top Material:LexanColour:grey (RAL 7035)Max. Temperature:100°CInstallation wide:70.0 mm (4 Module)Label dimensions:41.0 x 65.0 mmFlammability:in confomity with UL94-VO Base Material:norylColour:black (RAL 7021)Max. Temperaturr:100°CTerminal:max. 24Montage:DIN-standard rail (EN50022)Flammability:in conformity with UL94-VO Product DownloadsModule enclosure 700Maßzeichnung
Delivery time: on stock (1 day)
+4 
ULN2803AThe ULN2803A and ULN2804A each contain eight Darlington transistors with common emitters and integral suppression diodes for inductive loads. Each Darlington features a peak load current rating of 600 mA (500 mA continuous) and can withstand at least 50 V in the OFF state. Specifications Factory number:ULN2803A Manufacturer:ST Housing:DIP-18
+2 
Adam Hall DMX-Kabel (Meterware)The Adam Hall 4 STAR D 234 is perfectly suited for transmission of DMX signals.Our classic with 2 x 0.34 mm² center conductor is also perfect for longer distances,thanks to its bigger cross-section. This highly flexible cable is easy to wind,and thanks to its larger diameter also very robust and therefore also well suitedfor hard road applications.- Adam Hall 4 Star "Standard" Series- Highly flexible, easy to reel- Good shielding thanks to dense copper spiral shielding- Larger inner conductor of 2 x 0.34 mm²- PVC jacket of 6.5 mm diameterDelivery as a section (yard goods) or 100m on a drum.
Delivery time: on stock (1 day)
+2 
Sommer Cable DMX-Kabel 110 Ohm (Meterware)Das DMX-Kabel ist eine hervorragende Leitung zur Übertragung von Digitalsignalenim 110 Ω AES/EBU und DMX Datenformat. Es besitzt eine Schirmung aus einem aluminiumbedampften Vlies und einem Cu-Spiralwendelschirm mit 100 % Bedeckung.Es ist dadurch sehr gut gegen elektrische Einflüse geschüzt.Vorteile:- Optimale Schirmung durch die Verwendung eines dichten Cu-Wendelschirms + AL/PT-Folie bzw. AL-Vlies- Kompakt und dadurch platzsparendAnwendung:- Professionelle Studio- und Mikrofontechnik- Verbindung von Effektgeräten und Steuereinheiten, bei denen ein Return-Signal benötigt wird- Industrie- und Medizintechnik- Professionelle MIDI-Technik, Überspielkabel- High-End Verbindung von HiFi-Geräten- Steuerung von Licht- und Scanneranlagen und DisplaysLieferung als Abschnitt (Meterware) oder 100m auf Trommel. Technische Daten Eigenschaften:Digital 110 Ω AES / EBU OFC hochreines Kupfer Anwendung:DMX Farbe:Schwarz Signalübertragung:symmetrisch Aufbau:(2LI2Y0,22mm²)(ST)DY Bauform:Rund Durchmesser:5 mm Verkaufseinheit:Meterware als Abschnitt oder 100 Meter auf Trommel BPVo-Euroklasse:Fca Hersteller:Sommer Cable
Delivery time: on stock (1 day)
You might also be interested in:
+102 
DMX-Analog 0-10V 8-KanalThe DMX 0-10V Interface is especially designed to switch not-DMX-suitable devices with an analog input.On the output 8 analog signals with 0-10V output voltage are available.Each output is controllable via a DMX-channel and divided in 256 steps.A output driver on each channel allows loads up to 10mA. Specifications Power supply:12-24V DC Current consumption:50mA@12V; 40mA@24V (without connected load) Protocol:DMX512 RDM DMX channels:8 channels DMX-FAILHold / 0-100% Output:8 outputs with driver each max. 10mA Resolution:256 steps (8-Bit), linear Connections:screw terminals Dimensions:64mm x 82 mm Product DownloadsDMX-Analog 0-10V 8-KanalBedienungsanleitung DMX-Analog 0-10V 8 channelUser Manual
Delivery time: on stock (1 day)
+182 
DMX-Relais/Analog 4The DMX-Relais/Analog 4 is designed for switching loads of several kinds.Four potential free contacts with up to 8A switching power are available.Additional four analog outputs with 0-10V or 1-10V can be used to control systems with analog inputs.This relay outputs are suitable for switching DC or AC voltage.A DMX FAIL function hold the relays and analog states unchanged or switch off at a loss of DMX signal. Specifications Power supply:12-24V DC / 250mA Input:4 up to 12 DMX-channels Output:4 switching contacts (close) each max. 8A / 250V~ (165A/20ms Switch-on peak current) 4x analog output 0-10V / 1-10V DMX-FAIL:Hold / Off Connectors:screw terminals Dimensions:99 x 82mm Product DownloadsDMX-Relais/Analog 4Bedienungsanleitung DMX-Relais/Analog 4User Manual
Delivery time: on stock (1 day)
Tools & Equipment:
WAGO 221-2411 DurchgangsverbinderWith the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The 1-way through connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Number of poles:1 Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-2411 Manufactor:WAGO
Delivery time: on stock (1 day)
WAGO 221-412 Verbindungsklemme 2With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:2 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-412 Manufactor:WAGO
Delivery time: on stock (1 day)
+1 
WAGO 221-413 Verbindungsklemme 3With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:3 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-413 Manufactor:WAGO
Delivery time: on stock (1 day)
+1 
WAGO 221-415 Verbindungsklemme 5With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:5 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-415 Manufactor:WAGO
Delivery time: on stock (1 day)
+1 
WAGO 221-500 BefestigungsadapterWith the 221 series, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The mounting carrier is suitable for 2-, 3- and 5-conductor 221 Series Splicing Connectors (4 mm²). Specifications Type:Mounting carrier Suitable:for 2-, 3- and 5-conductor 221 Series Splicing Connectors Mounting type:DIN-35 rail Screw mount Color:Orange Part number:221-500 Manufactor:WAGO
Delivery time: on stock (1 day)
Power supply:
+22 
MEANWELL HDR-15-12 (12V/1,25A/15W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Enclosed case, Touch-guard screw terminals - Universal input - Overload protection, current limiting, auto recovery - Protections: short circuit/over load/over voltage - Power-on LED display - Low no load power consumption - Manufactor: MEANWELL - Manufactor order code: HDR-15-12 Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...1,25AOutput Power:15WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:45ARated Output Power:110...145%Operating Temperature Range:-30°C to +70°CUnit Weight:78gLength/Width/Height:54.5mm/17.5mm/90mm Product DownloadsHDR-15Datasheet
Delivery time: on stock (1 day)
+23 
MEANWELL HDR-60-12 (12V/4,5A/54W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...4.5AOutput Power:54WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
+29 
MEANWELL HDR-60-24 (24V/2,5A/60W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-24Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...2,5AOutput Power:60WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
+14 
MEANWELL RS-25-12 (12V/2,1A/25W)- Enclosed case, screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Long life 105°C electrolytic capacitors- Manufactor: MEANWELL- Manufactor order code: RS-25-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Output voltage:12V Output current, max:2,1A (0...2,1A) Input voltage:88...264V AC (47...63Hz) 125...373V DC Input Inrush Current, max.:30A Over Current Protection:110...180% Operating Temperature:-20...+70°C Weight:200g Produkt DownloadsRS-25Datasheet
Delivery time: on stock (1 day)