DMX-Analog 0-10V 1 channel
€68.26
Delivery time: on stock (1 day)
65 available
The shipping promise only applies to items shown with 
in the online shop and requires payment via PayPal. Order cut-off for same-day shipping: Mon–Thu until 13:00, except on public holidays.
Opening hours: Mon–Thu 08:00–14:00
- Direct from the manufacturer
- ships within 24 hours, Monday through Thursday
-
Made in Germany 
Made in Europe - technical support
Product information "DMX-Analog 0-10V 1 channel"
 DMX-Analog 0-10V 1-Kanal |
The DMX-Analog Interface 1-Channel is optimized to control a 0-10V or 1-10V device, e.g. an electronic balast.
The output output can be set to 0-10V or 1-10V analog signal.
With one DMX channel the output is controlled in 256 steps.
| Specifications |
| Power supply: | 12V DC / 50mA |
| Input: | DMX512 / 1 channel |
| DMX-Fail: | Hold / Off / On |
| Mode:: | 0-10V or 1-10V selectable |
| Output: | 1x Analog-Output |
| 256 Steps (DMX-Value 0-255 -> Analogvoltage 0/1-10V) | |
| Output current: | max. 10mA |
| Dimensions: | 30 x 70 mm |
| Product Downloads |
Verantwortliche Person für die EU
In der EU ansässiger Wirtschaftsbeteiligter, der sicherstellt, dass das Produkt den erforderlichen Vorschriften entspricht:
DMX4ALL GmbH
Reiterweg 2A
44869 Bochum
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de
WarningPlease note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Waste disposalElectrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
You might also be interested in:
+102 
DMX-Analog 0-10V 8-KanalThe DMX 0-10V Interface is especially designed to switch not-DMX-suitable devices with an analog input.On the output 8 analog signals with 0-10V output voltage are available.Each output is controllable via a DMX-channel and divided in 256 steps.A output driver on each channel allows loads up to 10mA. Specifications Power supply:12-24V DC Current consumption:50mA@12V; 40mA@24V (without connected load) Protocol:DMX512 RDM DMX channels:8 channels DMX-FAILHold / 0-100% Output:8 outputs with driver each max. 10mA Resolution:256 steps (8-Bit), linear Connections:screw terminals Dimensions:64mm x 82 mm Product DownloadsDMX-Analog 0-10V 8-KanalBedienungsanleitung DMX-Analog 0-10V 8 channelUser Manual
Delivery time: on stock (1 day)
+87 
DMX-Relais/Analog 1The DMX Relais/Analog 1 is designed for several kinds of controlling tasks.Potential free switch outputOne potential free switch output (normally open / NO) with up to 8A switching capacity is available.Switching contact for direct and alternating voltageThe switching contact is suitable for switching both direct voltage and alternating voltage.Analog control outputOne control output with 0-10V or 1-10V are available for control devices with analog input.For voltages from 12V up to 24VThe DMX Relais/Analog Interface 1 runs with supply voltages from 12 up to 24V direct voltage.DMX FAIL-FunctionAn adjustable DMX FAIL-Function offers the option to hold the current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX Relais/Analog Interface 1 the configuration via RDM or DMX.Several operating modesThe DMX Relais/Analog Interface 1 offers several operating modes which can be set via jumper or RDM:- Relay + Analog 8Bit 0-10V- Relay + Analog 8Bit 1-10V- Relay + Analog 10Bit 0-10V- Relay + Analog 10Bit 1-10V- Relay & Analog 8Bit 0-10V- Relay & Analog 8Bit 1-10V- Relay & Analog 10Bit 0-10- Relay & Analog 10Bit 1-10VTop hat rail mounting availableSuitable for the DMX Relais/Analog Interface 1 the DIN rail housing 350 is available as accessory. Specifications Power supply:12-24V DC 100mA@12V / 70mA@24V Protocol:DMX512 / RDM DMX channels:1 or 2 channels Output:1 switching contact NO max. 8A / 250V~ (165A@20ms Switch-on peak current) 1x analog output 0-10V / 1-10V DMX-FAIL:Hold / 0-100% Connectors:screw terminals Dimensions:29,2mm x 82mm Product DownloadsDMX-Relais/Analog 1Bedienungsanleitung DMX-Relais/Analog 1User Manual
Delivery time: Artikel wird für Sie bestellt
+182 
DMX-Relais/Analog 4The DMX-Relais/Analog 4 is designed for switching loads of several kinds.Four potential free contacts with up to 8A switching power are available.Additional four analog outputs with 0-10V or 1-10V can be used to control systems with analog inputs.This relay outputs are suitable for switching DC or AC voltage.A DMX FAIL function hold the relays and analog states unchanged or switch off at a loss of DMX signal. Specifications Power supply:12-24V DC / 250mA Input:4 up to 12 DMX-channels Output:4 switching contacts (close) each max. 8A / 250V~ (165A/20ms Switch-on peak current) 4x analog output 0-10V / 1-10V DMX-FAIL:Hold / Off Connectors:screw terminals Dimensions:99 x 82mm Product DownloadsDMX-Relais/Analog 4Bedienungsanleitung DMX-Relais/Analog 4User Manual
Delivery time: on stock (1 day)
Tools & Equipment:
+1 
Litze 10m BlauInsulated 1-wire copper wire 0,14mm².Delivery: 10m ring. Specifications Implementation:1-wire, insulated , multistrand (18x 0.1 mm) Typ:Copper wire, flexible Color:blue Outer diameter:~ 1,1 mm Length:10m
Delivery time: on stock (1 day)
+1 
Litze 10m GelbInsulated 1-wire copper wire 0,14mm².Delivery: 10m ring. Specifications Implementation:1-wire, insulated , multistrand (18x 0.1 mm) Typ:Copper wire, flexible Color:yellow Outer diameter:~ 1,1 mm Length:10m
Delivery time: on stock (1 day)
+1 
Litze 10m GrünInsulated 1-wire copper wire 0,14mm².Delivery: 10m ring. Specifications Implementation:1-wire, insulated , multistrand (18x 0.1 mm) Typ:Copper wire, flexible Color:green Outer diameter:~ 1,1 mm Length:10m
Delivery time: on stock (1 day)
+1 
Litze 10m RotInsulated 1-wire copper wire 0,14mm².Delivery: 10m ring. Specifications Implementation:1-wire, insulated , multistrand (18x 0.1 mm) Typ:Copper wire, flexible Color:red Outer diameter:~ 1,1 mm Length:10m
Delivery time: on stock (1 day)
+1 
Litze 10m SchwarzInsulated 1-wire copper wire 0,14mm².Delivery: 10m ring. Specifications Implementation:1-wire, insulated , multistrand (18x 0.1 mm) Typ:Copper wire, flexible Color:black Outer diameter:~ 1,1 mm Length:10m
Delivery time: on stock (1 day)
+1 
Litze 10m WeißInsulated 1-wire copper wire 0,14mm².Delivery: 10m ring. Specifications Implementation:1-wire, insulated , multistrand (18x 0.1 mm) Typ:Copper wire, flexible Color:white Outer diameter:~ 1,1 mm Length:10m
Delivery time: on stock (1 day)
Power supply:
+14 
MEANWELL RS-25-12 (12V/2,1A/25W)- Enclosed case, screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Long life 105°C electrolytic capacitors- Manufactor: MEANWELL- Manufactor order code: RS-25-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Output voltage:12V Output current, max:2,1A (0...2,1A) Input voltage:88...264V AC (47...63Hz) 125...373V DC Input Inrush Current, max.:30A Over Current Protection:110...180% Operating Temperature:-20...+70°C Weight:200g Produkt DownloadsRS-25Datasheet
Delivery time: on stock (1 day)
+8 
Stecker-Schaltnetzteil 12V 0,63A- Plug-in switching power supply with europlug- Universal input- Protections: short circuit/over load- Insulation Class II- Low no load power consumption- Meets DOE VI- Manufactor: HN-Power- Product name: HNP06-120L6 Specifications Output voltage:12V Output current, max:0,63A (0...0,63A) Input Voltage:90...264V AC (47...63Hz) Input Inrush Current, Max.:30A No Load Power Consumption, Max.:0,075W Operating Temperature:-10...+40°C Cable Length:1,5m Output Plug:2,1x5,5mm Produkt DownloadsHNP06-120L6Datasheet
Delivery time: on stock (1 day)
