ArtNet-LED-Dimmer 6

 MEANWELL HDR-15-12 (12V/1,25A/15W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Enclosed case, Touch-guard screw terminals - Universal input - Overload protection, current limiting, auto recovery - Protections: short circuit/over load/over voltage - Power-on LED display - Low no load power consumption - Manufactor: MEANWELL - Manufactor order code: HDR-15-12 Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...1,25AOutput Power:15WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:45ARated Output Power:110...145%Operating Temperature Range:-30°C to +70°CUnit Weight:78gLength/Width/Height:54.5mm/17.5mm/90mm Product DownloadsHDR-15Datasheet

 MEANWELL HDR-15-24 (24V/0,63A/15,2W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Enclosed case, Touch-guard screw terminals - Universal input - Overload protection, current limiting, auto recovery - Protections: short circuit/over load/over voltage - Power-on LED display - Low no load power consumption - Manufactor: MEANWELL - Manufactor order code: HDR-15-24 Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...0,63AOutput Power:15,2WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:45ARated Output Power:110...145%Operating Temperature Range:-30°C to +70°CUnit Weight:78gLength/Width/Height:54.5mm/17.5mm/90mm Product DownloadsHDR-15Datasheet

 MEANWELL HDR-150-12 (12V/11,3A/135,6W)- Direct assembly on DIN Rail- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit, over load, over voltage- Low no load power consumption- Power-on LED display- Insulation Class II- Manufactor: MEANWELL- Manufactor order code: HDR-150-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...11,3AOutput Power:135,6WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:70ARated Output Power:105...135%Operating Temperature Range:-30°C to +70°CUnit Weight:310gLength/Width/Height:54.5mm/105mm/90mm Product DownloadsHDR-60Datasheet

 MEANWELL HDR-150-24 (24V/6,25A/150W)- Direct assembly on DIN Rail- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit, over load, over voltage- Low no load power consumption- Power-on LED display- Insulation Class II- Manufactor: MEANWELL- Manufactor order code: HDR-150-24Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...6.25AOutput Power:150WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:70ARated Output Power:105...135%Operating Temperature Range:-30°C to +70°CUnit Weight:310gLength/Width/Height:54.5mm/105mm/90mm Product DownloadsHDR-60Datasheet

 MEANWELL HDR-60-12 (12V/4,5A/54W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...4.5AOutput Power:54WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet

 MEANWELL HDR-60-24 (24V/2,5A/60W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-24Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications  Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...2,5AOutput Power:60WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet

 LED-Dimmer DR4The LED-Dimmer DR4 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4 offers more than 10 user defined color changes.These can be created via the web browser.RGB-LED-DisplayThe RGB LED displays the current operation status of the LED-Dimmer DR4 clearly.Mute able LED-DisplayThe LED-Displays at the LED-Dimmer DR4 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or AppThe output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4 is controlled via Art-Net™, the DMX port can also be configured as a DMX output.RDM Support With RDM via ArtNet or DMX the LED-Dimmer DR4 provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Top hat rail mounting The top-hat rail housing 700 is available as equipment for the LED-Dimmer DR4.Firmware-Update-FunctionTo use future functions the LED-Dimmer DR4 offers a Firmware-Update-Function.Easy configurationA user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-InterfaceThe LED-Dimmer DR4 has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.

 LED-Dimmer DR4+The LED-Dimmer DR4+ is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).DIN-rail housing The LED-Dimmer DR4+ is designed with a DIN-rail housing for mounting on a DIN rail.High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4+ offers more than 10 user defined color changes.These can be created via the web browser.3 RGB-LEDsThe three RGB LEDs clearly indicate the current operating status of the LED-Dimmer DR4+.Mute able LED-Display The LED-Displays at the LED-Dimmer DR4+ are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or App The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4+ is controlled via Art-Net™, the DMX port can also be configured as a DMX output.Firmware-Update-Function To use future functions the LED-Dimmer DR4+ offers a Firmware-Update-Function.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-Interface The LED-Dimmer DR4+ has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.

 LED-Dimmer DR4FThe LED-Dimmer DR4F is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).Low-profile DIN-rail housing The LED-Dimmer DR4F is designed as a FLAT version, featuring a low-profile DIN-rail housing for space-saving installation.High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4F offers more than 10 user defined color changes.These can be created via the web browser.Mute able LED-DisplayThe LED-Displays at the LED-Dimmer DR4F are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or AppThe output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4F is controlled via Art-Net™, the DMX port can also be configured as a DMX output.RDM Support With RDM via ArtNet or DMX the LED-Dimmer DR4F provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Firmware-Update-FunctionTo use future functions the LED-Dimmer DR4F offers a Firmware-Update-Function.Easy configurationA user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-InterfaceThe LED-Dimmer DR4F has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.