DMX-LED-Dimmer 4

 MEANWELL HLG-120H-12A (12V/10A/120W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-120H-12A Specifications  Output voltage:12V (einstellbar: 10,8...13,5V)  Output current, max:10A (adjustable 5...10A)  Input voltage:90...264V AC (47...63Hz) 127...370V DC  Input Inrush Current, max.:60A  Operating Temperature:-40...+70°C  Weight:1120g Produkt DownloadsHLG-120HDatasheet

 MEANWELL HLG-120H-24A (24V/5A/120W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-120H-24A Specifications  Output voltage:24V (einstellbar: 22...27V)  Output current, max:5A (adjustable 2,5...5A)  Input voltage:90...264V AC (47...63Hz) 127...370V DC  Input Inrush Current, max.:60A  Operating Temperature:-40...+70°C  Weight:1120g Produkt DownloadsHLG-120HDatasheet

 MEANWELL HLG-240H-12A (12V/16A/192W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-240H-12A Specifications  Output voltage:12V (adjustable: 11,2...12,8V)  Output current, max:16A (adjustable 8...16A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:75A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:1300g Produkt DownloadsHLG-240HDatasheet

 MEANWELL HLG-240H-24A (24V/10A/240W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-240H-24A Specifications  Output voltage:24V (adjustable: 22,4...25,6V)  Output current, max:10A (adjustable 5...10A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:75A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:1300g Produkt DownloadsHLG-240HDatasheet

 MEANWELL HLG-240H-48A (48V/5A/240W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-240H-48A Specifications  Output voltage:48V (adjustable: 44,8...51,2V)  Output current, max:5A (adjustable 2,5...5A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:75A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:1300g Produkt DownloadsHLG-240HDatasheet

 MEANWELL HLG-320H-12A (12V/22A/264W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-320H-12A Specifications  Output voltage:12V (adjustable: 10,8...13,5V)  Output current, max:22A (adjustable 11...22A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:1880g Produkt DownloadsHLG-320HDatasheet

 MEANWELL HLG-320H-24A (24V/13,3A/319W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-320H-24A Specifications  Output voltage:24V (adjustable: 21...26V)  Output current, max:13,3A (adjustable 6,67...13,34A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:1880g Produkt DownloadsHLG-320HDatasheet

 MEANWELL HLG-600H-12A (12V/40A/480W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-600H-12A Specifications  Output voltage:12V (adjustable: 10,2...12,6V)  Output current, max:40A (adjustable 20...40A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:3900g Produkt DownloadsHLG-600HDatasheet

 MEANWELL HLG-600H-24A (24V/25A/600W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-600H-24A Specifications  Output voltage:24V (adjustable: 20,4...25,2V)  Output current, max:25A (adjustable 12,5...25A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Over Current Protection:95...108%  Operating Temperature:-40...+70°C  Weight:3900g Produkt DownloadsHLG-600HDatasheet

 MEANWELL HLG-80H-12A (12V/5A/60W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-80H-12A Specifications  Output voltage:12V (adjustable: 10,8...13,5V)  Output current, max:5A (adjustable 3...5A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Operating Temperature:-40...+70°C  Weight:840g Produkt DownloadsMEANWELL HLG-80HDatasheet

 MEANWELL HLG-80H-48A (48V/1,7A/81W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-80H-48A Specifications  Output voltage:48V (adjustable: 43...53V)  Output current, max:1,7A (adjustable 1,02...1,7A)  Input voltage:90...305V AC (47...63Hz) 127...431V DC  Input Inrush Current, max.:70A  Operating Temperature:-40...+70°C  Weight:840g Produkt DownloadsMEANWELL HLG-80HDatasheet

 DMX-LED-Dimmer X9The DMX-LED-Dimmer X9 is especially designed for controlling RGB LED-Stripes.The dimmer has 9 PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9 has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9 operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9 can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.RDM supportThe DMX-LED-Dimmer X9 allows configuration by RDM via DMX.LED-State DisplayThe DMX state is indicated via the LED status.Stand-Alone FunctionAs an alternative to DMX control, internal color sequences can be called upvia the address switch without external DMX control.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9. Specifications  Power supply:7-24V DC 80mA@12V / 100mA@24V (without connected LED load)  LED voltage:7-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling  DMX-FAIL:Hold / 0%-100%  Output:9 PWM-signal with 8Bit-resolution Common supply voltage  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V)  PWM-Frequency:244 Hz  Energy-Save output:Control output for switching off the load power supply units  StandAlone function:9 internal StandAlone programs  Connections:Screw terminals  Dimensions:99mm x 82 mm Product DownloadsDMX-LED-Dimmer X9Bedienungsanleitung DMX-LED-Dimmer X9User Manual Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit

 DMX-LED-Dimmer X9HRThe DMX-LED-Dimmer X9HR is especially designed for controlling RGB LED-Stripes.The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9HR has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9HR operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB group. The global master dimmer is fixed atDMX address 1 and can be used as system master dimmer.Adjustable dimming curveThe dimming curves can be configured individually for each output.RDM supportThe DMX-LED-Dimmer X9HR allows configuration by RDM via DMX.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Firmware-Update-FunctionTo use future functions, the DMX-LED-Dimmer X9HR offers a firmware update function.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR. Specifications  Power supply:7-24V DC 80mA@12V / 100mA@24V (without load)  LED voltage:7-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-Mode 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels  Masterdimmer:None / Global / RGB / System  DMX-FAIL:Hold / 0%-100%  8bit ModePWM-Frequency 488 Hz with LookUp-Table 2 kHz or 4 kHz without LookUp-Table  16bit ModePWM-Frequency 488 Hz without LookUp-Table  Output:9 PWM-signal common supply voltage anode (PLUS)  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V)  Energy-Save output:Control output for switching off the load power supply units  StandAlone function:9 internal StandAlone programs  Connections:Screw terminals  Dimensions:99mm x 82 mm Produkt DownloadsDMX-LED-Dimmer X9HRBedienungsanleitung DMX-LED-Dimmer X9HRUser Manual DMX-LED-Dimmer X9HRUSB Driver (ab V2.2)Version 6.0.0.0 DMX-LED-Dimmer X9HRFirmware (ab V2.2) Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit

 DMX-LED-Dimmer X9HR+The DMX-LED-Dimmer X9HR+ is especially designed for controlling RGB LED-Stripes.The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9HR+ has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V).0% to 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9HR+ operates with supply voltages from 12V up to 24V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lost DMX signal thecurrent state (HOLD) or to adopt a predefined value if the DMX signal fails.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs) orone master dimmer per RGB group. The global master dimmer is fixed at DMX address 1 andcan be used as system master dimmer.Adjustable dimming curveThe dimming curves can be configured individually for each output.RDM supportThe DMX-LED-Dimmer X9HR+ allows configuration by RDM via DMX.SubDevice-ModeWithin the SubDevice Mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.Touch-ControlThe DMX-LED-Dimmer X9HR+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status displayVia a RGB status display the DMX reception is shown.Firmware-Update-FunctionTo use future functions, the DMX-LED-Dimmer X9HR+ offers a firmware update function. Specifications  Power supply:7-24V DC 100mA@12V / 150mA@24V (without load)  LED voltage:7-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling and LookUp-Table 18 channels with 16Bit-controlling + optional Master-Dimmer-Channels  Output:9 PWM-signal common supply voltage anode (PLUS)  8bit ModePWM-Frequency 488 Hz with LookUp-Table 2 kHz or 4 kHz without LookUp-Table  16bit ModePWM-Frequency 488 Hz without LookUp-Table  Masterdimmer:None / Global / RGB / System  DMX-FAIL:Hold / 0%-100%  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V)  CTRL output:Control output for switching off the load power supply units (Energy-Save)  StandAlone function:9 internal StandAlone programs  Display:7 segment display RGB LED  TOUCH-Control:3 touch buttons  Connectors:Screw terminals  Dimensions:105mm x 90mm x 60mm Produkt DownloadsDMX-LED-Dimmer X9 HR+Bedienungsanleitung DMX-LED-Dimmer X9 HR+User Manual DMX-LED-Dimmer X9 HR+USB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9 HR+Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit

 DMX-LED-Dimmer X9HRXThe DMX LED Dimmer X9HRX is a 9-channel LED driver with 16-bit grayscale adaptive pulse density modulation (APDM)and a high output frequency of up to 8kHz at the same time.Thanks to the special APDM technology in combination with the optimized 48V LED drivers,the DMX LED dimmer X9HRX is perfectly suited for controlling RGB, RGBW or even single-color W stripes.9 OutputsThe DMX-LED-Dimmer X9HRX has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A. So it is possible to connect a maximum loadof 120W (12V) / 240W (24V) / 240W (48V).High efficiencyThe 48V LED drivers are designed to allow the DMX LED Dimmer X9HRXto operate without active cooling (no fan).0% up to 100% dimmableThe connected LEDs are dimmed by APDM from 0% to 100%.For voltages from 12V up to 48VThe DMX-LED-Dimmer X9HRX operates with supply voltages from 12V up to 48V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HRX can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of loss DMX signalthe current state (HOLD) or predefined a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB/RGBW group.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 500Hz and 8000Hz via RDM.Adjustable Dimming CurveThe dimming curves can be configured individually for each output.RDM SupportThe DMX-LED-Dimmer X9HRX allows configuration by RDM via DMX.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.RGB-Status-DisplayThe device status is shown via the RGB status display.Firmware-Update-FunctionIn order to be able to use future functions, the DMX-LED-Dimmer X9HRX offersa firmware update function both via USB and RDM.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HRXand therefore ideally suited for switch cabinet installation. Specifications  Power supply:12-48V DC 80mA@12V / 100mA@24V (without load)  LED voltage:12-48V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling and Curve-Definition 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels  DMX-FAIL:Hold / 0%-100%  Output:9 PWM-signal with 16Bit-resolution and APDM (Adaptive Pulse Density Modulation) common supply voltage  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V) / 9x 240W (48V)  Masterdimmer:None / Global / RGB / RGBW  PWM frequency:500Hz / 1kHz / 2kHz / 4kHz / 8kHz  CTRL Output:Control output for switching off the load power supply units (Energy-Save)  StandAlone function:9 internal Stand-Alone programs  Display:RGB LED  Connections:Screw terminals  Dimensions:99mm x 82mm Produkt DownloadsDMX-LED-Dimmer X9HRXBedienungsanleitung DMX-LED-Dimmer X9HRXUser Manual DMX-LED-Dimmer X9HRXUSB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9HRXFirmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit

 DMX-LED-Dimmer X9HRX+The DMX LED Dimmer X9HRX+ is a 9-channel LED driver with 16-bit grayscale adaptive pulse density modulation (APDM)and a high output frequency of up to 8kHz at the same time.Thanks to the special APDM technology in combination with the optimized 48V LED drivers,the DMX LED dimmer X9HRX+ is perfectly suited for controlling RGB, RGBW or even single-color W stripes.9 OutputsThe DMX-LED-Dimmer X9HRX+ has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power Constant Voltage OutputsThe outputs can drive a current up to 10A. So it is possible to connect a maximum loadof 120W (12V) / 240W (24V) / 240W (48V).High efficiencyThe 48V LED drivers are designed to allow the DMX LED Dimmer X9HRX+to operate without active cooling (no fan).0% up to 100% dimmableThe connected LEDs are dimmed by APDM from 0% to 100%.For voltages from 12V up to 48VThe DMX-LED-Dimmer X9HRX+ operates with supply voltages from 12V up to 48V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HRX+ can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of loss DMX signalthe current state (HOLD) or predefined a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB/RGBW group.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 500Hz and 8000Hz via RDM.Adjustable Dimming CurveThe dimming curves can be configured individually for each output.RDM SupportThe DMX-LED-Dimmer X9HRX+ allows configuration by RDM via DMX.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.Touch-ControlThe DMX-LED-Dimmer X9HRX+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status-DisplayThe device status is shown via the RGB status display.Firmware-Update-FunctionIn order to be able to use future functions, the DMX-LED-Dimmer X9HRX+ offersa firmware update function both via USB and RDM.

 LED-Dimmer DR4The LED-Dimmer DR4 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4 offers more than 10 user defined color changes.These can be created via the web browser.RGB-LED-DisplayThe RGB LED displays the current operation status of the LED-Dimmer DR4 clearly.Mute able LED-DisplayThe LED-Displays at the LED-Dimmer DR4 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or AppThe output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4 is controlled via Art-Net™, the DMX port can also be configured as a DMX output.RDM Support With RDM via ArtNet or DMX the LED-Dimmer DR4 provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Top hat rail mounting The top-hat rail housing 700 is available as equipment for the LED-Dimmer DR4.Firmware-Update-FunctionTo use future functions the LED-Dimmer DR4 offers a Firmware-Update-Function.Easy configurationA user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-InterfaceThe LED-Dimmer DR4 has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.

 LED-Dimmer DR4+The LED-Dimmer DR4+ is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).DIN-rail housing The LED-Dimmer DR4+ is designed with a DIN-rail housing for mounting on a DIN rail.High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4+ offers more than 10 user defined color changes.These can be created via the web browser.3 RGB-LEDsThe three RGB LEDs clearly indicate the current operating status of the LED-Dimmer DR4+.Mute able LED-Display The LED-Displays at the LED-Dimmer DR4+ are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or App The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4+ is controlled via Art-Net™, the DMX port can also be configured as a DMX output.Firmware-Update-Function To use future functions the LED-Dimmer DR4+ offers a Firmware-Update-Function.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-Interface The LED-Dimmer DR4+ has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.

 LED-Dimmer DR4FThe LED-Dimmer DR4F is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).Low-profile DIN-rail housing The LED-Dimmer DR4F is designed as a FLAT version, featuring a low-profile DIN-rail housing for space-saving installation.High Power Constant Voltage OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 250Hz and 4000Hz.10 user defined color changes/programsThe LED-Dimmer DR4F offers more than 10 user defined color changes.These can be created via the web browser.Mute able LED-DisplayThe LED-Displays at the LED-Dimmer DR4F are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or AppThe output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4F is controlled via Art-Net™, the DMX port can also be configured as a DMX output.RDM Support With RDM via ArtNet or DMX the LED-Dimmer DR4F provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Firmware-Update-FunctionTo use future functions the LED-Dimmer DR4F offers a Firmware-Update-Function.Easy configurationA user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-InterfaceThe LED-Dimmer DR4F has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.