MEANWELL HDR-60-5 (5V/6,5A/32,5W)
€19.99
Delivery time: on stock (1 day)
9 available
The shipping promise only applies to items shown with 
in the online shop and requires payment via PayPal. Order cut-off for same-day shipping: Mon–Thu until 13:00, except on public holidays.
Opening hours: Mon–Thu 08:00–14:00
- Direct from the manufacturer
- ships within 24 hours, Monday through Thursday
-
Made in Germany 
Made in Europe - technical support
Product information "MEANWELL HDR-60-5 (5V/6,5A/32,5W)"
 MEANWELL HDR-60-5 (5V/6,5A/32,5W) |
- Small, staircase rail power supply, compact design, fanless design
- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15
- Complies with the EU standard DIN EN 43880
- Enclosed case, Touch-guard screw terminals
- Universal input
- Overload protection, current limiting, auto recovery
- Protections: short circuit/over load/over voltage
- Power-on LED display
- Low idle power consumption
- Insulation class II
- Manufactor: MEANWELL
- Manufactor order code: HDR-60-5
Note:
These power supplies are considered as a component that has to be installed in a final equipment.
| Specifications |
| Input Type: | 1-Phase / Single Phase |
| Input Voltage Range: | 85VAC to 264VAC | 120VDC to 370VDC |
| Frequency Range: | 47~63Hz |
| Output Voltage: | 5VDC |
| Output Current: | 0...6.5A |
| Output Power: | 32,5W |
| Open Frame/Enclosed: | Enclosed |
| Isolation Voltage: | 3kVrms |
| Inrush Current max.: | 30A/115VAC | 60A/230VAC |
| Rated Output Power: | 105...160% |
| Operating Temperature Range: | -30°C to +70°C |
| Unit Weight: | 190g |
| Length/Width/Height: | 54.5mm/52.5mm/90mm |
| Product Downloads |
Verantwortliche Person für die EU
In der EU ansässiger Wirtschaftsbeteiligter, der sicherstellt, dass das Produkt den erforderlichen Vorschriften entspricht:
MEAN WELL EUROPE N.V.
Langs de Werf 8
1185 XT Amstelveen
Niederlande
info@meanwell.eu
https://www.meanwell.eu
WarningPlease note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Waste disposalElectrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
You might also be interested in:
+22 
MEANWELL HDR-15-12 (12V/1,25A/15W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Enclosed case, Touch-guard screw terminals - Universal input - Overload protection, current limiting, auto recovery - Protections: short circuit/over load/over voltage - Power-on LED display - Low no load power consumption - Manufactor: MEANWELL - Manufactor order code: HDR-15-12 Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...1,25AOutput Power:15WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:45ARated Output Power:110...145%Operating Temperature Range:-30°C to +70°CUnit Weight:78gLength/Width/Height:54.5mm/17.5mm/90mm Product DownloadsHDR-15Datasheet
Delivery time: on stock (1 day)
+19 
MEANWELL HDR-15-24 (24V/0,63A/15,2W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Enclosed case, Touch-guard screw terminals - Universal input - Overload protection, current limiting, auto recovery - Protections: short circuit/over load/over voltage - Power-on LED display - Low no load power consumption - Manufactor: MEANWELL - Manufactor order code: HDR-15-24 Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...0,63AOutput Power:15,2WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:45ARated Output Power:110...145%Operating Temperature Range:-30°C to +70°CUnit Weight:78gLength/Width/Height:54.5mm/17.5mm/90mm Product DownloadsHDR-15Datasheet
Delivery time: on stock (1 day)
+35 
MEANWELL HDR-150-12 (12V/11,3A/135,6W)- Direct assembly on DIN Rail- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit, over load, over voltage- Low no load power consumption- Power-on LED display- Insulation Class II- Manufactor: MEANWELL- Manufactor order code: HDR-150-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...11,3AOutput Power:135,6WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:70ARated Output Power:105...135%Operating Temperature Range:-30°C to +70°CUnit Weight:310gLength/Width/Height:54.5mm/105mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
+35 
MEANWELL HDR-150-24 (24V/6,25A/150W)- Direct assembly on DIN Rail- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit, over load, over voltage- Low no load power consumption- Power-on LED display- Insulation Class II- Manufactor: MEANWELL- Manufactor order code: HDR-150-24Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...6.25AOutput Power:150WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:70ARated Output Power:105...135%Operating Temperature Range:-30°C to +70°CUnit Weight:310gLength/Width/Height:54.5mm/105mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
+23 
MEANWELL HDR-60-12 (12V/4,5A/54W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-12Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:12VDCOutput Current:0...4.5AOutput Power:54WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
+29 
MEANWELL HDR-60-24 (24V/2,5A/60W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-24Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...2,5AOutput Power:60WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
+23 
MEANWELL HDR-60-48 (48V/1,25A/60W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-48Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:48VDCOutput Current:0...1,25AOutput Power:60WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
Tools & Equipment:
WAGO 221-2411 DurchgangsverbinderWith the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The 1-way through connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Number of poles:1 Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-2411 Manufactor:WAGO
Delivery time: on stock (1 day)
WAGO 221-412 Verbindungsklemme 2With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:2 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-412 Manufactor:WAGO
Delivery time: on stock (1 day)
+1 
WAGO 221-413 Verbindungsklemme 3With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:3 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-413 Manufactor:WAGO
Delivery time: on stock (1 day)
+1 
WAGO 221-415 Verbindungsklemme 5With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:5 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-415 Manufactor:WAGO
Delivery time: on stock (1 day)
+1 
WAGO 221-500 BefestigungsadapterWith the 221 series, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The mounting carrier is suitable for 2-, 3- and 5-conductor 221 Series Splicing Connectors (4 mm²). Specifications Type:Mounting carrier Suitable:for 2-, 3- and 5-conductor 221 Series Splicing Connectors Mounting type:DIN-35 rail Screw mount Color:Orange Part number:221-500 Manufactor:WAGO
Delivery time: on stock (1 day)
