MiniPixx 4.5 RDMThe MiniPixx 4.5 RDM is the smallest DMX controller for digital LED stripes, which is available in different versions.The individual pixels of the digital LED strip can be controlled in the simplest way via DMX.Different versionsThe MiniPixx RDM is available in 3 different versions. Depending on the LED stripe,a version 3.5 / 4.5 (5V) or 4.12 (12V) is available.170 RGB-, 128 RGBW- or 512 single color pixelBy controlling via DMX, 170 pixels (RGB), 128 pixels (RGBW) or512 pixels (single color) can be controlled individually.RDM SupportThe MiniPixx RDM allows an RDM supported configuration via DMX.Pixel-SequencerWith the pixel sequencer different effects can be generated.Only a few DMX channels are necessary to customize the settings for the effects.Small DesignDue to the small size of only 12mm x 25mm, the MiniPixx RDM can be mounted directly at the beginning of the LED stripe.Selectable LED-ChipThe LED chip used in the connected digital LED strip can be selected. This allows the use with various digital LED stripes.Settable Color ReplayThe color sequence for RGB as well as RGBW LED stripes is adjustable for universal use.SingleColor-OptionVia a DMX universe up to 512 pixels can be controlled in single color.For this, the SingleColor Option must be selected, in which each pixel needs only one channel.Settable Pixel GroupThe MiniPixx RDM supports pixel groups with an adjustable length. Each pixel group behaves like a singlepixel that is controlled via 3 DMX channels (for RGB). This way channels can be saved in longer installations.br>  Specifications  Power supply:5V / 50mA from the connected digital LED stripe  Protocol:DMX512 RDM  Output Protocol:RGB(LED type)APA-101max. 3071 Pixel APA-102max. 1534 Pixel APA-104max. 512 Pixel DycoLED PB3max. 3071 Pixel DycoLED PC5max. 192 Pixel GS8208max. 512 Pixel INK1002 / INK1003max. 512 Pixel LC8808(B)max. 512 Pixel LPD1101 / LPD6803max. 3071 Pixel LPD1886 - 8Bitmax. 512 Pixel LPD1886 12Bit (8Bit controlled)max. 341 Pixel LPD1886 12Bit (12Bit controlled)max. 341 Pixel LPD8806max. 2047 Pixel MagiarLED III flexmax. 1534 Pixel SK6812 / SK6822max. 512 Pixel SK9822max. 1534 Pixel TLS3008 8Bitmax. 558 Pixel TM1804 / TM1812 / TM1829max. 512 Pixel UCS1903 / UCS1912max. 512 Pixel UCS2903 / UCS2912max. 512 Pixel UCS9812 (8Bit controlled)max. 292 Pixel UCS9812 (16Bit controlled)max. 292 Pixel WS2801max. 2048 Pixel WS2811 / WS2812(B) / WS2813 / WS2815 / WS2818max. 512 Pixel   RGBW SK6812max. 384 Pixel TM1814max. 382 Pixel UCS2912max. 384 Pixel    Color sequence:RGB (adjustable) SingleColor red, green, blue, white RGBW with UCS2912, SK6812, TM1814  Pixel groups:1 - 127  Max. number of pixel:170 Pixel (RGB) 128 Pixel (RGBW) 512 Pixel (Single Color)  Dimensions:12mm x 25mm Product DownloadsMiniPixx RDMBedienungsanleitung MiniPixx RDMUser Manual

 DMX-Servo-Control 2The DMX-Servo-Control 2 is designed for controlling of two servos via DMX.Two ServosThe DMX Servo Control 2 has two servo ports. Each can be controlled via one DMX channel.Servos with 5V up to 12V DC can be usedThe supply voltage of the DMX-Servo-Control 2 is between 5V and 12V. Servos with a supply voltage within this range can be connected directly.Adjustable Servo control signalThe controlling occurs via an adjustable pulse width.Compact DesignThe design and the compact construction allows an installation of this small assembly in areas that do not offer much space.LED-DisplayThe integrated LED is a multifunctional display for showing the current device status.DMX AddressingThe DMX addressing is settable via a 10-position DIP switch.RDM SupportThe DMX Servo Control 2 allows configuration via RDM over DMX. Specifications  Power supply:5-12V DC / 50mA without connected servo  Protocol:DMX512 RDM  Servo voltage:5-12V DC (corresponds to the supply voltage)  Servo-Power:max. 3A in sum for both servos  DMX-Channels:2 Channels  Connection:Screw terminals/pin header  Dimensions:30mm x 67 mm Product DownloadsDMX-Servo-Control 2Bedienungsanleitung DMX-Servo-Control 2User Manual Application NotesDC-Motor Steuerung per DMXAppNote DC motor control with DMXAppNote

 MiniPixx 4.12 RDMThe MiniPixx 4.12 RDM is the smallest DMX controller for digital LED stripes, which is available in different versions.The individual pixels of the digital LED strip can be controlled in the simplest way via DMX.Different versionsThe MiniPixx RDM is available in 3 different versions. Depending on the LED stripe,a version 3.5 / 4.5 (5V) or 4.12 (12V) is available.170 RGB-, 128 RGBW- or 512 single color pixelBy controlling via DMX, 170 pixels (RGB), 128 pixels (RGBW) or512 pixels (single color) can be controlled individually.RDM SupportThe MiniPixx RDM allows an RDM supported configuration via DMX.Pixel-SequencerWith the pixel sequencer different effects can be generated.Only a few DMX channels are necessary to customize the settings for the effects.Small DesignDue to the small size of only 12mm x 25mm, the MiniPixx RDM can be mounted directly at the beginning of the LED stripe.Selectable LED-ChipThe LED chip used in the connected digital LED strip can be selected. This allows the use with various digital LED stripes.Settable Color ReplayThe color sequence for RGB as well as RGBW LED stripes is adjustable for universal use.SingleColor-OptionVia a DMX universe up to 512 pixels can be controlled in single color.For this, the SingleColor Option must be selected, in which each pixel needs only one channel.Settable Pixel GroupThe MiniPixx RDM supports pixel groups with an adjustable length. Each pixel group behaves like a singlepixel that is controlled via 3 DMX channels (for RGB). This way channels can be saved in longer installations.br>  Specifications  Power supply:12V / 50mA from the connected digital LED stripe  Protocol:DMX512 RDM  Output Protocol:RGB(LED type)APA-101max. 3071 Pixel APA-102max. 1534 Pixel APA-104max. 512 Pixel DycoLED PB3max. 3071 Pixel DycoLED PC5max. 192 Pixel GS8208max. 512 Pixel INK1002 / INK1003max. 512 Pixel LC8808(B)max. 512 Pixel LPD1101 / LPD6803max. 3071 Pixel LPD1886 - 8Bitmax. 512 Pixel LPD1886 12Bit (8Bit controlled)max. 341 Pixel LPD1886 12Bit (12Bit controlled)max. 341 Pixel LPD8806max. 2047 Pixel MagiarLED III flexmax. 1534 Pixel SK6812 / SK6822max. 512 Pixel SK9822max. 1534 Pixel TLS3008 8Bitmax. 558 Pixel TM1804 / TM1812 / TM1829max. 512 Pixel UCS1903 / UCS1912max. 512 Pixel UCS2903 / UCS2912max. 512 Pixel UCS9812 (8Bit controlled)max. 292 Pixel UCS9812 (16Bit controlled)max. 292 Pixel WS2801max. 2048 Pixel WS2811 / WS2812(B) / WS2813 / WS2815 / WS2818max. 512 Pixel   RGBW SK6812max. 384 Pixel TM1814max. 382 Pixel UCS2912max. 384 Pixel    Color sequence:RGB (adjustable) SingleColor red, green, blue, white RGBW with UCS2912, SK6812, TM1814  Pixel groups:1 - 127  Max. number of pixel:170 Pixel (RGB) 128 Pixel (RGBW) 512 Pixel (Single Color)  Dimensions:12mm x 25mm Product DownloadsMiniPixx RDMBedienungsanleitung MiniPixx RDMUser Manual

 DMX-LED-Dimmer CC1The DMX-LED-Dimmer CC1 is designed for controlling LEDs, which are operated with constant current and works with up to 48V DC.Output with selectable constant current modulesDifferent constant current modules with different output currents are available for connection.The constant current modules are available as accessories and are not included in the scope of delivery.Power supply from 12V up to 48VThe DMX-LED Dimmer CC1 works with supply voltages from 12V to 48V.0% to 100%The connected LEDs can be dimmed via PWM of 0% up to 100%.DMX FAIL-FunctionAn adjustable DMX FAIL-Function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-LED-Dimmer CC1 the configuration via RDM or DMX.Top hat rail mounting availableSuitable for the DMX-LED-Dimmer CC1 the DIN rail housing 350 is available as accessory. Specifications  Power supply:9-48V DC 20mA@12V; 11mA/24V; 6mA@48V (without LED driver)  Protocol:DMX512 / RDM  DMX channels1 DMX channel  DMX-FAIL:HOLD / 0-100%  Output:1 current regulated output (8 bit controlled) (Output current depends on the LED driver module)  PWM-Frequency:244 Hz  Dimensions:29,2mm x 82mm Product DownloadsDMX-LED-Dimmer CC1Bedienungsanleitung DMX-LED-Dimmer CC1User Manual

 DMX-Player XSThe DMX-Player XS is a DMX StandAlone device.The scenes created with the DMX-Configurator can be loaded on the device via RS232.The stored scenes can be replayed without a computer. An application in live operation with a connected PC is possible too. By the easy using an application in decoration and presentation areas will be possible.  Specifications  Power supply:7-12V DC / 50mA  PC-connection:RS 232 !!! USB-RS232 adapter should be with FTDI chip !!!  DMX-output:512 channels  Program memory:8 kByte for one light scene 5 pin screw terminal  Dimensions:29,2 x 82 mm Product DownloadsDMX-Player XSBedienungsanleitung DMX-Player XSUser Manual Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers

 DMX-Universal-Demux8 outputs with open-collector driverThere are 8 outputs with open collector output driver for controlling external devices.Voltages from 12V up to 24VThe DMX-Universal-Demux operates with supply voltages from 12V up to 24V.Different operation modesBy jumper the operating mode of the DMX-Universal-Demux can be selected.Available are the operation modes Threshold / Binär / PWM / Servo / Strobo.Controllable via DMXThe DMX-Universal-Demux is controlled by DMX and uses 1 or 8 DMX channels depending on the operating mode.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to change to a predefined value in case of DMX signal failure.RDM supportThe DMX-Universal-DMX allows the configuration via RDM or DMX.LED status displayThe LED status display shows the DMX reception.DIN rail housing availableThe DIN rail housing 700 is available as an accessory for the DMX-Universal-Demux. Specifications  Supply voltage:7-24V DC  Current consumption:40mA@12V / 35mA@24V (without load)  Protocol:DMX512 RDM  DMX channels:1 or 8 channels (depending on adjusted mode)  Output:8 open-collector outputs max. 500mA  DMX-FAIL:HOLD / 0-100%  Operation mode:Threshold (switches at 50%) Binary (8-Bit) PWM (~175Hz) Servo Strobo Monostable 1 Second  Connection:Screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-Universal-DemuxBedienungsanleitung DMX-Universal-DemuxUser Manual

 NanoDMX USB InterfaceThe NanoDMX USB Interface is an "adapter-cable" which allows an easy controlling of DMX-capable devices via PC.By using the USB-port no power supply is neccessary.Each interface is equipped with a micro-controller serving the values for all 512 channels andgenerating a DMX-signal without loading the PC.To run this NanoDMX USB Interface with an existing software a virtual COM-Port will be applied.This allows that the data transfer takes place such by using a conventionally serial interface.This interface will be supported inter alia:DMX-ConfiguratorFreeStyler (3rd Generation interface)DMXControl V2PC_DimmerIP-SymconTLC (Theater Light Control)Light@NightVVVVMagicQLumiDMX Specifications  Voltage power:5V / 250mA over USBPC Connection:USB 1.1 / USB 2.0DMX Output:512 channels fast mode: 44 frames/sec slow mode: 33 frames/secConnection:3 pin XLR-female connectorCable length:ca. 1mUSB-Driver:CDC-driver (virtual Com Port)Operation system:Windows 7, Windows 8/8.1 Product DownloadsNanoDMX USB InterfaceBedienungsanleitung NanoDMX USB InterfaceUser Manual NanoDMX USB InterfaceUSB Driver Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Devolopment

 DMX-Analog 0-10V 1-KanalThe DMX-Analog Interface 1-Channel is optimized to control a 0-10V or 1-10V device, e.g. an electronic balast. The output output can be set to 0-10V or 1-10V analog signal.With one DMX channel the output is controlled in 256 steps. Specifications  Power supply:12V DC / 50mA  Input:DMX512 / 1 channel  DMX-Fail:Hold / Off / On  Mode::0-10V or 1-10V selectable  Output:1x Analog-Output  256 Steps (DMX-Value 0-255 -> Analogvoltage 0/1-10V)  Output current:max. 10mA  Dimensions:30 x 70 mm Product DownloadsDMX-Analog 0-10V 1 channelBedienungsanleitung DMX-Analog 0-10V 1 channelUser Manual

 DMX-RELAIS 2The DMX-RELAIS 2 is designed for switching loads of several kinds.Two potential free switching outputs2 potential free switching outputs up to 8A switching capacity are available.Switch per relayThe switching contacts are designed as changeover switches and can switch resistive loads.Switching contact for direct and alternating voltageThe version is suitable to switch resistive loads using direct voltage (DC) oralternating voltage (AC).For voltages from 12V up to 24VThe DMX-Relais 2 works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 the DIN rail housing 700 is available as accessory. Specifications  Power supply:12-24V DC / 250mA (150mA@12V / 100mA@24V)  Protokoll:DMX512 RDM  DMX-Channels:1 or 2 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl  Output:2 potential free switching contacts DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph  Connectors:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2Bedienungsanleitung DMX-RELAIS 2User Manual

 DMX-RELAIS 2 INRUSHThe DMX-RELAIS 2 INRUSH is designed for several control tasks.Two potential free switching outputs2 potential free switching outputs (closer / NO)up to 8A switching capacity are available.Switching contact for direct and alternating voltageThe INRUSH version is suitable for control direct or alternating voltage.For voltages from 12V up to 24VThe DMX-Relais 2 INRUSH works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 INRUSH offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 INRUSH the DIN rail housing 700 is available as accessory. Specifications  Power supply:12-24V DC 150mA@12V / 100mA@24V  Protocol:DMX512 RDM  DMX channels:1 or 2 channels  Output:2 switching contacts (165A/20ms Switch-on peak current) DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl  Connectors:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2 INRUSHBedienungsanleitung DMX-RELAIS 2 INRUSHUser Manual

 DMX/RDM-Sensor 4The DMX/RDM-Sensor 4 is a converter with 4 signal inputs and can be used both as a DMX output device / DMX source or as an RDM device.Different Operation ModesThe DMX/RDM-Sensor 4 can be run as DMX output device (inputs to DMX channels) or RDM device (inputs to sensor values).Four Analog- or Digital InputsEach of the 4 inputs can be set independently as analog input (0-5V or 0-10V) or as digital input (Active Low or Active High).RDM SupportThe DMX/RDM-Sensor 4 can be configured via RDM using DMX.Sensor ValuesVia the RDM-Parameter SENSOR_VALUE for each of the 4 inputs the sensor values can be requested.Settable Average-FilterThe average filter can be set for each input and can be used to create an average value that compensates for fluctuations in the input signal.Settable Slope CorrectionThe output curve can be set for each input using the adjustable slope correction.Settable DMX-AddressesThe DMX addresses can be set for each input, allowing the input signal to be output on up to 8 DMX channels.Settable Device LabelThe device label can be set for each input to name each sensor uniquely via RDM.Lockable Device settingsThe RDM parameters Lock Pin and Lock State allow or avoid changing saved RDM parameters to prevent unauthorized changes.Free RDM-SoftwareFor setting the parameters via RDM, our free RDM Configurator software is available for download on our website www.dmx4all.de.Top hat rail housing availableThe top-hat rail housing 350 or the top-hat rail housing 350 flat are available as accessories for the DMX/RDM-Sensor 4. Specifications  Power supply:12-24V DC (150mA@12V / 100mA@24V)  Protocol:DMX512 RDM  Operation modes:DMX (Inputs to DMX channels) RDM (Inputs to RDM sensor values)  Inputs:4 Analog (0-10V) or Digital Inputs  Connection:Screw terminals  Dimensions:29,2mm x 82mm Product DownloadsDMX/RDM-Sensor 4Bedienungsanleitung DMX/RDM-Sensor 4User Manual

 DMX-Merger MK3 2IN/1OUTThe DMX-Merger allows an assemble of two DMX-sources.An usage will be applicable where a total control should occur with several DMX-equipment.If more than two DMX-sources will be assembled a series connection of more than one DMX-Merger is possible. The signal runtime adds in this case. The DMX-Merger assembles the both DMX-lines in a different way.To fix how to work the both inputs on the common output it is possible to adjust the operation mode. Specifications  Power supply:7-24V DC / 200mA  Input:2x 512 channels  Output:512 channels  Modes:Higest value Lowest value Last changed value Last changed universe Add of both value Combine Backup  Dimensions:64,2mm x 82 mm Product DownloadsDMX-Merger MK3 2IN/1OUTBedienungsanleitung DMX-Merger MK3 2IN/1OUTUser Manual DMX-Merger MK3 2IN/1OUTUSB Driver 32 & 64bit - Version 6.0.0.0 DMX-Merger MK3 2IN/1OUTFirmware

 DMX-Relais/Analog 1The DMX Relais/Analog 1 is designed for several kinds of controlling tasks.Potential free switch outputOne potential free switch output (normally open / NO) with up to 8A switching capacity is available.Switching contact for direct and alternating voltageThe switching contact is suitable for switching both direct voltage and alternating voltage.Analog control outputOne control output with 0-10V or 1-10V are available for control devices with analog input.For voltages from 12V up to 24VThe DMX Relais/Analog Interface 1 runs with supply voltages from 12 up to 24V direct voltage.DMX FAIL-FunctionAn adjustable DMX FAIL-Function offers the option to hold the current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX Relais/Analog Interface 1 the configuration via RDM or DMX.Several operating modesThe DMX Relais/Analog Interface 1 offers several operating modes which can be set via jumper or RDM:- Relay + Analog 8Bit 0-10V- Relay + Analog 8Bit 1-10V- Relay + Analog 10Bit 0-10V- Relay + Analog 10Bit 1-10V- Relay & Analog 8Bit 0-10V- Relay & Analog 8Bit 1-10V- Relay & Analog 10Bit 0-10- Relay & Analog 10Bit 1-10VTop hat rail mounting availableSuitable for the DMX Relais/Analog Interface 1 the DIN rail housing 350 is available as accessory. Specifications  Power supply:12-24V DC 100mA@12V / 70mA@24V  Protocol:DMX512 / RDM  DMX channels:1 or 2 channels  Output:1 switching contact NO max. 8A / 250V~ (165A@20ms Switch-on peak current) 1x analog output 0-10V / 1-10V  DMX-FAIL:Hold / 0-100%  Connectors:screw terminals  Dimensions:29,2mm x 82mm Product DownloadsDMX-Relais/Analog 1Bedienungsanleitung DMX-Relais/Analog 1User Manual

 DMX-Audio UnitThe DMX Audio Unit is designed to play audio files in mp3 format.64 Audio FilesVia DMX up to 64 audio files can be called via one DMX channel.USB Data MediumThe MP3 audio files are stored on a USB data medium and easily exchangeable.Several Operation ModesDepending on the application, the DMX Audio Unit offers different operating modes.Either 32 or 64 audio files can be called directly or via up/down the audio files can be played back in line.Playback SINGLE PLAY / LOOP PLAY / CYCLE PLAY / PAUSE / STOPPlayMode is used to start playback, put the playback into a repeat loop or pause and stop to stop the replay.Settable Playback VolumeThe playback volume can be adjusted via a DMX channel.Settable Accoustic ColourThe acoustic colour (EQ) can be adjusted between five predefined settings.Power supply 8V up to 24VThe DMX Audio Unit can be operated with 8V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD),turn off playback (OFF), or to operate a previously set state in the event of a failed DMX signal.RDM SupportThe DMX Audio Unit allows configuration via RDM over DMX.Direct access to the device is not necessary. Via RDM, the settings can be made comfortable from distance.Compact DimensionsThe compact dimension of 29,2mm x 82mm allows the installation on a top hat rail housing with only 35mm width.Top hat rail mountingThe top-hat rail housing 350 or the top-hat rail housing 350flat are available as equipment for the DMX Audio Unit. Specifications  Power supply:8-24V DC  Power consumption:100mA@12V / 70mA@24V  Protocol:DMX512 RDM  DMX channels:4 or 5 channels (depends on operation mode)  DMX-FAIL:HOLD / OFF / Perdefine  Operation modes:32Songs/PlayMode/Vol/EQ 64Songs/PlayMode/Vol/EQ SongUp/SongDown/PlayMode/Vol/EQ  Play Mode:Single Play Loop Play Cycle Play Pause Stop  Acoustic color (EQ):Normal Pop Rock Jazz Classic  Output:Line Out (R+L)  Data medium:USB stick  File format:mp3  Connections:screw terminals USB-A 3,5mm Plug  Dimensions:29,2mm x 82mm  Content:DMX-Audio Unit USB stick 4GB Quick guide german and english Produkt DownloadsDMX-Audio UnitBedienungsanleitung DMX-Audio UnitUser Manual

 DMX-DSI/DALI-Interface 8This DMX-DSI/DALI-Interface 8 controls electronic ballast with DSI or DALI-interface.8 output signals direct on clamp.Each output will be controlled via a DMX-channel.The switching between DSI- and DALI-operation occurs via a switch for all outputs.  Specifications  Power supply:12-24V DC / 100mA  Input:8 DMX-channels  Output:8x DSI or DALI each output controlled via one DMX-channel (broadcast)  Connection:Screw terminals  Dimensions:64,2 x 82 mm Product DownloadsDMX-DSI/DALI-Interface 8Bedienungsanleitung DMX-DSI/DALI-Interface 8User Manual

 DMX-Stepper-ControlThe DMX-Stepper-Control is designed for controlling a stepping motor (Stepper) via DMX.The extensive configuration is done via RDM.Several operating modesSeveral operating modes allow a continuous operation with variable speed or the starting of defined positions. The minimum and maximum step speed as well as the number of steps and number of positions can be set individually.RDM Support The DMX stepper control allows settings via RDM over DMX.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is available as download from our website www.dmx4all.de.Lockable Device SettingsThe RDM parameters Lock Pin and Lock State allow or avoid changings of saved RDM parameters in order to prevent unauthorized changes.Replaceable stepping motor driverThe standard Pololu A4988 step motor driver is suitable for power supplies from 8-24V and can control a current of 2A per phase.Alternatively, the stepper motor driver can also be replaced with a SilentStepStick with Trinamic TMC2100 / TMC2208 or, alternatively, an external stepper motor driver can be used with the BRIDGE stepper motor driver.Micro step operating modesThe following micro step operation modes are supported Full-Step (1/1) / Half-Step (1/2) / Quarter-Step (1/4) / Eighth-Step (1/8) / Sixteenth-Step (1/16)Left and Right End-SwitchInputs for a left and right end-switch allow the travel distance to be limited.These can optionally be deactivated after initialization.Activate / Deactivate the Step Motor DriverThe stepper motor driver can optionally be activated or deactivated via DMX.Settable Initialization processOptionally, initialization can be carried out after switching on. The number of steps left and right as well as step speed can be set for this process. The motor then moves left and right until the end switch is reached and saves this position as the initial point.Reset per DMXDuring operation the initialization process (Reset) can optionally be started via DMX. Specifications  Power supply:8-24V DC / 50 mA (without connected stepper)  Protocol:DMX512 RDM  DMX channels:1-5 DMX-channels (depending on adjusted mode)  Output driver:Pololu A4988 stepper driver (default) TMC2100 SilentStepStick (Optional accessory) TMC2208 (Optional accessory) Bridge for external Stepper Driver (Optional accessory)  Stepper-Voltage:8-24V DC (is equal to the power supply voltage)  Stepper-Current:max. 2A with Pololu A4988 stepper motor driver  Connection:Screw terminals  Dimensions:80mm x 39mm Product DownloadsDMX-Stepper-ControlBedienungsanleitung DMX-Stepper-ControlUser Manual DMX-Stepper-ControlUSB DriverVersion 6.0.0.0 DMX-Stepper-ControlFirmware

 DMX PixxControl DRThe DMX PixxControl DR is especially designed for controlling digital LED-Stripes orPixel-Stripes via DMX.By controlling via DMX 170 Pixel (RGB) / 128 Pixel (RGBW) / 512 Pixel (single color) canbe controlled individually.Selectable LED-ChipThe used LED-Chip within the connected digital LED-Stripe is selectable.So, the usage with several digital LED-Stripes is possible.Adjustable color reproductionThe RGB-Color sequence is adjustable, allowing an universal application.SingleColor-OptionA SingleColor-Option is selectable in which each pixel occupies only one channel.So up to 512 pixel in one color can be controlled via one DMX-Universe.Adjustable pixel groupThe DMX PixxControl DR supports pixel groups with adjustable lengths.Each pixel group behaves like a single pixel which is controlled via3 DMX-Channels (for RGB). That economizes channels in longer installations.Easy ConfigurationAn easy configuration via RDM, USB via DMX-Configurator or DMX allowsthe setting of all parameters.Pixel-SequencerThe Pixel-Sequencer generates several effects.The settings can be made with only a few DMX channelsto fit the effects individually.RDM SupportThe DMX PixxControl DR allows configuration via RDM over DMX.TPM2-ProtocolThe DMX PixxControl DR also supports the TPM2 protocolvia the USB-Interface via Virtual Com Port (VCP).Firmware-Update-FunctionTo use future functions the DMX PixxControl DR offers a Firmware-Update-Function.Top-hat rail housing availableThe top-hat rail housing 350 or 350flat is available as accessory for the DMX PixxControl DR. Specifications  Power supply:5 - 12V DC / 300mA@5V; 150mA@12V or via USB-Connection  Input:DMX512 RDM  Output:Digital control signal for up to 170 RGB-Pixel, single controlable 128 RGBW-Pixel, single controlable  Supported LED types:APA101, APA102, APA104 DycoLED PB3, DycoLED PC5 GS8208 INK1002, INK1003 LPD6803, LPD6806, LPD8803 LPD1886 8Bit, LPD1886 12Bit SK6812, SK6822, SK9822 TM1804, TM1812, TM1814, TM1829 UCS1903, UCS1912, UCS2912, UCS9812 WS2801, WS2811, WS2812(B), WS2813 WS2815, WS2818  Color sequence:RGB (adjustable) SingleColor white SingleColor red SingleColor green SingleColor blue RGBW with UCS2912, SK6812, TM1814  Pixel groups:adjustable  Max. Pixel count:RGB: 170 Pixel/Pixelgroups; RGBW: 128 Pixel/Pixelgroups SingleColor: 512 Pixel/Pixelgroups  Dimensions:29,2mm x 82mm Product DownloadsDMX PixxControl DRBedienungsanleitung DMX PixxControl DRUser Manual DMX PixxControl DRUSB Driver 32 & 64bit - Version 6.0.0.0 DMX PixxControl DRFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

 DMX-Analog 0-10V 8-KanalThe DMX 0-10V Interface is especially designed to switch not-DMX-suitable devices with an analog input.On the output 8 analog signals with 0-10V output voltage are available.Each output is controllable via a DMX-channel and divided in 256 steps.A output driver on each channel allows loads up to 10mA. Specifications  Power supply:12-24V DC  Current consumption:50mA@12V; 40mA@24V (without connected load)  Protocol:DMX512 RDM  DMX channels:8 channels  DMX-FAILHold / 0-100%  Output:8 outputs with driver each max. 10mA  Resolution:256 steps (8-Bit), linear  Connections:screw terminals  Dimensions:64mm x 82 mm Product DownloadsDMX-Analog 0-10V 8-KanalBedienungsanleitung DMX-Analog 0-10V 8 channelUser Manual

 DMX-Splitter 4The DMX-Splitter 4 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit.The voltage range is between 8V up to 24V.Compact design for top hat rail mountingThe DMX-Splitter 4 is suitable for installation in top hat rail mountingswith a width of 7cm due to its small size.LED-DisplayTwo LEDs show clearly the current operation mode.Top hat rail mounting availableSuitable for the DMX Splitter 4 the DIN rail housing 700 is available as accessory. Specifications  Power supply:8-24V DC (350mA@12V; 200mA@24V)  Input:512 channels  Output:4x 512 channels galvanically isolated  Connections:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-Splitter 4Bedienungsanleitung DMX-Splitter 4User Manual

 NanoPixx DMX-ControllerThe NanoPixx DMX controller is the smallest DMX controller for digital LED stipes.By using DMX it is a very easy way to control the individual pixels of the digital LED stripe.Compatible with many LED controllerThe used LED chip inside the connected digital LED Stripe is selected.Thus, the use of various digital LED Stripes is possible, for example:WS2811, WS2812(B), TM1804, TM1812, TM1829, DycoLED, LPD6803, LPD1101, APA101, APA102, APA104, UCS2912, ...Adjustable color sequenceThe RGB color sequence is adjustable which allows universal usage.In addition, you can choose a single color option, in which each pixel has only one channel.Adjustable pixel groupThe NanoPixx DMX-Controller supports pixel groups with an adjustable length.Each pixel group behaves as a single pixel on the 3 DMX channels is controlled.Thus, in extended installations save channels.High quality and compact designThe electronics of the NanoPixx DMX controller is housed in a 3-pin XLR connector in metal version.This results in an extremely compact design.Easy ConfigurationTo configure the NanoPixx DMX controllers basic DMX signal with specific values is applied during power up. After recognizing the DMX values, the configuration is stored in the internal memory of NanoPixx DMX controller.  Specifications  Power supply:5V from the connected digital LED stripe  Connection:XLR 3 male for DMX JST-SM 4 male for digital LED stripe Adapter JST-SM 4 male to JST-SM 3 male included  Protocol:DMX512  LED types:APA-101max. 2048 Pixel APA-102max. 1024 Pixel APA-104max. 341 Pixel DycoLED PB3max. 2048 Pixel DycoLED PC5max. 557 Pixel INK1002 / INK1003max. 341 Pixel LPD1101 / LPD6803max. 2048 Pixel LPD1886 - 8Bitmax. 682 Pixel LPD1886 12Bit (8Bit controlled)max. 512 Pixel LPD1886 12Bit (12Bit controlled)max. 512 Pixel LPD8803max. 2047 Pixel MagiarLED III flexmax. 1024 Pixel SK6812max. 341 Pixel SK9822max. 1024 Pixel TM1804 / TM1812 / TM1829max. 341 Pixel UCS1903 / UCS1912max. 170 Pixel UCS2903 / UCS2912max. 170 Pixel UCS9812max. 195 Pixel UCS9812 (8Bit controlled)max. 195 Pixel UCS9812 (16Bit controlled)max. 195 Pixel WS2801max. 1366 Pixel WS2811 / WS2812(B)max. 341 Pixel   !!! 170 pixel can be controlled individual !!!  Color sequence:RGB adjustable / SingleColor red, green, blue, white  Pixel groups:adjustable, 1 - 127  Dimensions:Diameter: 19mm Length: ~25cm Length adapter: ~5cm  Delivery includes::NanoPixx DMX-Controller Adapter JST-SM 4 female to JST-SM 3 female User manual (German) Product DownloadsNanoPixx DMX-ControllerBedienungsanleitung NanoPixx DMX-ControllerUser Manual

 DMX-LED-Dimmer CC4The DMX-LED-Dimmer CC4 is designed for controlling LEDs, which are operatedwith constant current and works with up to 48V DC.4 outputs with choose able constant current modulesDifferent constant current modules with different output currents are available for plug-on.The constant current modules are available as accessories and are not included in the scope of delivery.For voltages from 12V up to 24VThe DMX-LED-Dimmer CC4 works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.LED state displayThe DMX state is indicated via the LED status.DMX-MasterdimmerOptionally an additional DMX channel can be activated as master dimmer.0% up to 100% dimmableThe connected LEDs are dimmed from 0% up to 100% via PWM.RDM supportThe DMX-LED-Dimmer CC4 allows configuration by RDM via DMX.Top-hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR.Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation. Specifications  Power supply:9-48V DC / 20mA@12V; 11mA/24V; 6mA@48V (without LED driver)  Output voltage:Depends on the constant current module used  Output current:Depends on the constant current module used  Protocol:DMX512 RDM  DMX-Channels:4 / 5 channels  DMX-FAIL:HOLD / ALL OFF / ALL ON  Masterdimmer:can be enabled  PWM-Frequency:244 Hz  Connections:Screw terminals  Dimensions:99mm x 82mm Product DownloadsDMX-LED-Dimmer CC4Bedienungsanleitung DMX-LED-Dimmer CC4User Manual

 DMX-LED-Dimmer 4The DMX-LED-Dimmer 4 is a compact LED-Dimmer with 4 seperate LED-outputs.These can be used for RGB/ RGB+W or for single color stripes.The connectors for LED,power supply and DMX are made with removable screw terminals.Can be used from 12V to 48VThe DMX-LED Dimmer 4 can be used in a wide power supply range from 12V to 48V.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V) / 240W (48V).Customizable LookUp tablesThe DMX-LED-Dimmer 4 has one LookUp-Table per output.The definition of the LookUp tables is done via the USB port using theprogram DMX-Configurator, which is available as a free download.Removable screw terminalsThe DMX-LED Dimmer 4 is designed with removable screw terminals.16 Million ColorsWith the RGB-LED-Stripe up to 16 million colours can be adjusted.By using an additional single color white stripe it is possible to makecolor neutral illuminations or pastel colours.Firmware-Update-FunctionIn order to take advantage of future features, the DMX-LED-Dimmer 4 has a firmware update function. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:12-48V DC / 50mA without load (=LED voltage)  LED voltage:12-48V DC (no AC voltage !) (=power supply voltage)  DMX-IN:4 channels + optional Master-Dimmer-Channel  DMX-Fail:Hold / Off / On  Ausgang:4 PWM-Signal with 16 Bit resolution common supply voltage  Output current:max. 10A each output with 12V or 24V max. 5A each output with 48V max. 10A in sum through all outputs  Output :120W (12V) / 240W (24V) / 240W (48V)  PWM-Frequency:244 Hz / 4kHz  Master-Dimmer:None / Masterdimmer / System-Masterdimmer  StandAlone-Function:9 internal StandAlone-Programs  Dimensions:80mm x 50,5mm Product DownloadsDMX-LED-Dimmer 4Bedienungsanleitung DMX-LED-Dimmer 4User Manual DMX-LED-Dimmer 4USB Driver - Version 6.0.0.0 DMX-LED-Dimmer 4Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

 DMX-LED-Dimmer 16xRGBThe DMX-LED-Dimmer 16xRGB has 48 outputs which are summarized in 16 RGB groups.Each output is optimal for all RGB-LED-stripes but can be also used for unicoloured LED-stripes.The global master-dimmer (all outputs) or one master-dimmer per RGB-group can be activated.The global master-dimmer can be fixed to the DMX-address 1 as system-master-dimmer. Specifications  Power supply:7-24V DC / 100mA (without connected load)  Input:DMX512 / 48 up to 64 channels  Output:48 PWM-outputs per up to 2A (together 14A)  PWM-Frequency:120 Hz  Dimensions:100 x 60 mm Product DownloadsDMX-LED-Dimmer 16xRGBBedienungsanleitung DMX-LED-Dimmer 16xRGBUser Manual

 SD-Player 8The SD-Player 8, in the following only called ArtNet Player X,is the first Stand-Alone Controller from DMX4ALL, offered in different model versions.Depending on the needed application, the ArtNet Player X is available in different designs and functionalities.As usual, the ArtNet Player X is also quickly ready for use in DMX4ALL manner and remains intuitiveand user-friendly despite numerous and new functions in the handling.This is possible by the well-structured user interface of the device's own web interface, available for the settings.An overview of the current status is provided by the integrated RGB LED.Whether as a board version or as compact ready-made device with comfortable touch operation, the ArtNet Player Xcan be used to play lighting programs from SD card. Different file formats can be used, which can be created withthe DMX Configurator or used as TPM2 files from freely available software.With up to 4 universes, a maximum of 2048 channels can be output via the network with just one ArtNet Player X.Even in larger installations, handling across several devices remains easy and clear thanks to Master-Slave operation.The ArtNet Player X offers the possibility to execute programs comfortably time-controlled. Up to 4 configurable timerscan be defined individually. For each timer one or several days can be assigned as well as the start time.Furthermore, the playback duration can be set optionally.The current time is needed for the correct processing the timers. This setting is done either via the device's ownweb interface, the optionally available DCF77 Key with DCF77 sensor or according to the ArtNet specificationvia network-based ArtTimeSync packages. DCF77 allows an automatic adjustment to summer / winter time.The configurable digital inputs integrated in the ArtNet Player X allow operation by remote pushbuttons,making additional devices obsolete. Designed as a LongDistance inputs, even larger distances do not cause anyproblems when mounting the switching elements.The ArtNet Player X is convincing and combines a multitude of useful and innovative functions undera top-hat rail housing in its space-saving, compact design.Replay up to 4 DMX UniversesThe ArtNet Player X can output up to 4 DMX universes via Art-Net.Output via Art-NetThe DMX universes to be output can be output via Art-Net.Synchronization of sveral devicesIf more DMX universes are needed, several ArtNet Player X can be synchronized.Two galvanically separate DMX connectionsOn the ArtNet Player X there are 2 galvanically isolated DMX connections,one DMX-OUT and one DMX-IN.Remote-FunctionThe ArtNet Player X has a configurable remote function. Remote control ispossible via DMX, Art-Net, HTTP request or DMX4ALL Commands.8 LongDistance inputs8 configurable digital inputs are available for connecting buttons or switches.The inputs are designed as LongDistance Inputs, so the switching elements can also be installed in greater distance.Switchable LED DisplayThe LED displays on the ArtNet Player X can be switched off by ArtNet command or time-controlled,to avoid disturbing "light spots " especially on stage.RGB-FilterA quick and uncomplicated change of the defined color in the program is allowed by the RGB filter.The selected colors can be filtered as needed without editing the previously created program.Firmware-Update-FunctionThe firmware update function enables to use always the free, current device software.Different data files for lighting programsThe ArtNet Player X plays the lighting programs from the SD card.The DMX4ALL program files as well as TPM2 or TPM2NET can be used as data formats.Easy ConfigurationFast and uncomplicated configuration is possible at any time from a PC, smartphone or tablet,due to the user-friendly configuration via any web browser.DIN rail housing availableThe DIN rail housing 700 is available as accessory for the ArtNet Player X.Free SoftwareFor creating the programs our free software DMX-Configurator can be used, which is availablein the current FREE version as download on our website www.dmx4all.de. Specifications  Power supply:8-24V DC (150mA@12V; 100mA@24V)  Connections:RJ45 Ethernet Screw terminals  Ethernet:10 Mbit/s | 100 Mbit/s  Art-Net™ / sACN:4 universes up to 2048 channels  DMX2x galvanically isolated 1x DMX OUTPUT: DMX512 1x DMX INPUT: DMX512  Device-Sync:Synchronisation of several devices  Remote-Options:DMX Art-Net™ HTTP-Request DMX4ALL Commands  Digital Input:8 configurable Long Distance-Inputs  Timer:Up to 4 configurable timer for executing programs  SD Card:microSD up to 16GB  Playback format:DMX4ALL program files TPM2 files TPM2NET files  Status display:RGB-LED, network status LEDs all disengageable  Features:RGB-Filter Firmware-Update-Function Silent without a fan  Optional Equipment:DCF77 receiver  Dimension:62mm x 88mm x 29mm Product DownloadsSD-Player 8Bedienungsanleitung SD-Player 8User Manual SD-Player 8Firmware SD-Player 8Sample Configuration Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

<table width="800" cellspacing="1" cellpadding="1"> <tr> <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;PixxSplitter DR8</strong></span></td> </tr></table><br>The PixxSplitter DR8 is a manifold for a digital LED signal to up to 8 connected digital LED-Strips.<br><br>Up to 999 RGB or RGBW pixels can be connected to each output.<br><br>The input signal, coming from a pixel controller, contains control information for all connected pixels.<br>This allows to control up to 8 different digital LED-Strip elements with just one control unit. The wiring is radial.<br><br><br>In the Default-Setting, the number of pixels on each output is set to 100 RGB pixels.<br>In total a pixel controller drives 800 RGB pixels, whereby the first 100 pixels (pixels 1-100) are connected to output 1,<br>the second 100 pixels (pixels 101-200) to output 2, etc.<br><br><br><img class="dmxmadein" src="https://www.media.dmx4all.store/images/made-in-germany.png" border="0"><br><br><br>　<table width="800" cellspacing="1" cellpadding="1"> <tr> <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" border="0" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Specifications</strong></span></td> </tr></table><table border="0" cellspacing="1" cellpadding="1"> <tr> <td width="300">&nbsp;</td> <td width="500">&nbsp;</td> </tr> <tr> <td>Power supply:</td> <td>8-24V / 100mA</td> </tr> <tr> <td>&nbsp;</td> <td>5V / 100mA via Mini-USB connector</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Input:</td> <td>Control signal for digital LED stripes</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Output:</td> <td>8x control signal for digital LED stripes</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Compatible LED-Types:</td> <td>SK6812</td> </tr> <tr> <td>&nbsp;</td> <td>GS8208</td> </tr> <tr> <td>&nbsp;</td> <td>WS2811, WS2812(B)</td> </tr> <tr> <td>&nbsp;</td> <td>INK1002, INK1003</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Color sequence:</td> <td>RGB / RGBW (selectable)</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Number of pixel/output:</td> <td>1 - 999 pixel</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Display:</td> <td>3 digit 7 segment display</td> </tr> <tr> <td>&nbsp;</td> <td>8x LED</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Controls:</td> <td>3 buttons (UP / DOWN / SELECT, SET)</td> </tr> <tr> <td>&nbsp;</td> <td>&nbsp;</td> </tr> <tr> <td>Dimensions:</td> <td>99mm x 82mm</td> </tr></table><br><br>　<table width="800" cellspacing="1" cellpadding="1"> <tr> <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Produkt Downloads</strong></span></td> </tr></table><div id="dmx4all-buttons"><a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_german/pixx_splitter_dr8_german.pdf" target="_blank">PixxSplitter DR8<br> <span><span class="german-lang">Bedienungsanleitung</span></span></a> <br> <a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_english/pixx_splitter_dr8_english.pdf" target="_blank">PixxSplitter DR8<br> <span><span class="english-lang">User Manual</span></span></a> <br> <a class="drivers-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/drivers/driver_x32_x64_pixx_splitter_dr8.zip">PixxSplitter DR8<br> <span><span class="windows-os">USB Driver</span></span></a> <br> <a class="firmware-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/firmware/firmware_pixx_splitter_dr8.zip">PixxSplitter DR8<br> <span><span class="firmware-os">Firmware</span></span></a></div>

 DMX-LED-Dimmer X9The DMX-LED-Dimmer X9 is especially designed for controlling RGB LED-Stripes.The dimmer has 9 PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9 has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9 operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9 can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.RDM supportThe DMX-LED-Dimmer X9 allows configuration by RDM via DMX.LED-State DisplayThe DMX state is indicated via the LED status.Stand-Alone FunctionAs an alternative to DMX control, internal color sequences can be called upvia the address switch without external DMX control.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9. Specifications  Power supply:7-24V DC 80mA@12V / 100mA@24V (without connected LED load)  LED voltage:7-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling  DMX-FAIL:Hold / 0%-100%  Output:9 PWM-signal with 8Bit-resolution Common supply voltage  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V)  PWM-Frequency:244 Hz  Energy-Save output:Control output for switching off the load power supply units  StandAlone function:9 internal StandAlone programs  Connections:Screw terminals  Dimensions:99mm x 82 mm Product DownloadsDMX-LED-Dimmer X9Bedienungsanleitung DMX-LED-Dimmer X9User Manual

 ArtNet-LED-Dimmer CC4The ArtNet-LED-Dimmer CC4 is designed for controlling LEDs,which are operated with constant current and works with up to 48V DC.4 Outputs with selectable constant current modulesSeveral constant current modules with different output currents to insert are available.The constant current modules are available as accessory and not included in delivery.For power supply from 12V up to 48VThe ArtNet-LED-Dimmer CC4 works with a power supply of 12V up to 48V.DMX or Art-Net™The ArtNet-LED-Dimmer CC4 can be controlled via DMX or ArtNet (DMX over Ethernet).Which signal is used prior can be selected.DMX-FAIL FunctionA DMX-FAIL-Function, which can be activated optionally, leaves the status unchangedin case of a DMX-Signal failure, turns off the output OFF (0%) or ON (100%).Disengageable LED-DisplaysThe LED-Displays at the ArtNet-LED-Dimmer CC4 can be disengaged viaArtNet-Command (AcLedMute) or time controlled. This is very helpfulto avoid disturbing “lights points” e.g. on stage.10 User defined Color Changes / ProgramsThe ArtNet-LED-Dimmer CC4 offers 10 user defined color changes.These can be created via a web browser or via the Android App „DMX4ALL Remote“.Test Function for Service PurposesFor test and service purposes it is possible to switch on the single outputs viathe web interface. So each output can be checked without an external control.Easy ConfigurationAn user friendly configuration via web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, anytime the configuration is possible from PC, Smartphone or tablet.For an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The network settings can be leaved unchanged and the IP can be configured without any problems.Firmware-Update-FunctionTo use future functions the ArtNet-LED-Dimmer CC4 offers a Firmware-Update-Function.The update can be started from a web browser, so no direct access to the device is necessary! Specifications  Power supply:9-48V DC / 150mA@12V; 80mA/24V; 60mA@48V (Current consumption without LED-Driver)  Ethernet:RJ45 (Art-Net™)  DMX:3pin screw terminal  DMX-Kanäle4 Channels (without master dimmer) 5 Channels (with master dimmer)  DMX-FAIL:HOLD / ALL OFF / ALL ON  Masterdimmer:activatable  Output:4 current regulated output (8 bit controlled) (Output current depends on the LED driver module)  PWM-Frequency:244 Hz  USB connector:5V / 500mA for power supply external devices (e.g. WLAN-Bridge)  Dimensions:99mm x 82mm  Constant current modules:Constant current LED-Driver LDD-H(available as an accessory)Constant current LED-Driver NLDD-H Product DownloadsArtNet-LED-Dimmer CC4Bedienungsanleitung ArtNet-LED-Dimmer CC4User Manual ArtNet-LED-Dimmer CC4Firmware

 USB-DMX STAGE-PROFI MK2 XLR3The USB-DMX STAGE-PROFI MK2 is designed for the rough stage environment.Housed in an aluminium housing with a Neutrik-XLR-female and screwable USB-und connecting-malethis interface offers all you need in a robust opeartion.The galvanic isolated DMX-output protects against dangerous electrical signals on the DMX-Bus.An external power supply during the operation is not necessarybecause the USB-interface can be used as power supply.To run this USB-DMX STAGE-PROFI MK2 Interface with existing softwarea virtual COM-Port applied in the system is needed.This allows a data transfer as well as the usage of a conventionally serial interface.Alternatively a direct access to the USB-driver from the user software is possible.Special features of the version USB-DMX STAGE-PROFI MK2:Galvanically isolated DMX-outputAluminium housingNeutrik XLR-feamle 3 pinScrewable USB connectionStandAlone function for replaying the light scenes without PC8k Byte memory for the StandAlone-light sceneThis interface will be supportet iuter alia: DMX-ConfiguratorFreeStyler (2nd Generation interface)DMXControl (Version2)PC_DimmerIP-SymconTLC (Theater Light Control)Light@NightVVVVMagicQ Specifications  Power supply:5V / 500mA via USB  PC-connection:USB 1.1 / USB 2.0  DMX-output:512 channels galvanicallly isolated DMX output 3 pin XLR-female  Dimensions:32mm x 27mm x 90mm  USB-driver:FTDI D2XX & VCP (virtaul COM-Port)  Operating system:Windows® 7,Windows® 8 Product DownloadsUSB-DMX STAGE-PROFI MK2Bedienungsanleitung USB-DMX STAGE-PROFI MK2User Manual USB-DMX STAGE-PROFI MK2USB Driver Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Devolopment

 ArtNet-LED-Dimmer 4 MK2The ArtNet-LED-Dimmer 4 MK2 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via removable screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).High Power OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.10 user defined color changes/programsThe ArtNet-LED-Dimmer 4 MK2 offers more than 10 user defined color changes.These can be created via the web browser or the Android App „DMX4ALL Remote“.Disengageable LED-Display The LED-Displays at the ArtNet-LED-Dimmer 4 MK2 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.For an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The network settings can be leaved unchanged and the IP can be configured without any problems.Controlling via browser or App with Colorwheel / Slider The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.Firmware-Update-Function To use future functions the ArtNet-LED-Dimmer 4 MK2 offers a Firmware-Update-Function.This can be started from a web browser, so that no direct access to the device is necessary!DMX4ALL Communication-Interface The ArtNet-LED-Dimmer 4 MK2 has a further TCP-Communication-Interface.This interface uses the DMX4ALL-Commands with TCP-Commands via TCP-Packages to Port 10001. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:12-24V DC / 100mA (=LED voltage)  LED voltage:12-24V DC (no AC voltage !)  Connection:RJ45 Ethernet  LED-connection:R/G/B + W screw terminals max. 10A with common anode (+)  USB-connection:5V / 500mA for power supply external devices (e.g. WLAN-bridge)  PWM-Frequency:250 Hz  Dimensions:115mm x 54mm x 23mm DMX4ALL Commands  Protocol:Art-Net 3 ™ DMX4ALL Commands Product DownloadsArtNet-LED Dimmer 4 MK2Bedienungsanleitung ArtNet-LED Dimmer 4 MK2User Manual ArtNet-LED Dimmer 4 MK2Firmware Software & ToolsIP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 ArtNet-DMX Mux16The ArtNet-DMX Mux16 has 16 digital inputs which are given to a ArtNet and DMX output..Each input can act to one or more output channels and the mode is selectable.A user-friendly configuration by using the webinterface allows a fast and uncomplicated setting of all parameters.The firmware of the ArtNet-DMX Mux16 can be update easy over the network. Specifications  Power supply:7-24V DC / 0,5A  Ethernet:1x RJ45  DMX-OUT:1x 512 channels  Inputs:16x Long Distance Digital Input  Mode:Switch Button On Button Off Button On/Off Dimmer Up/Down Dimmer Up Dimmer Down Button On + Dimmer Up Button Off + Dimmer Down Button On/Off + Dimmer Up/Down  Dimensions:99 x 82 x 20mm Product DownloadsArtNet-DMX Mux16Bedienungsanleitung ArtNet-DMX Mux16User Manual ArtNet-DMX Mux16Firmware Software & ToolsIP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 USB-DMX STAGE-PROFI MK2 XLR5The USB-DMX STAGE-PROFI MK2 Interface is designed for the rough stage environment.Housed in an aluminium housing with a Neutrik-XLR-female and screwable USB-und connecting-male this interface offers all you need in a robust opeartion.The galvanic isolated DMX-output protects against dangerous electrical signals on the DMX-Bus. An external power supply during the operation is not necessarybecause the USB-interface can be used as power supply. To run this USB-DMX STAGE-PROFI MK2 Interface with existing softwarea virtual COM-Port applied in the system is needed.This allows a data transfer as well as the usage of a conventionally serial interface.Alternatively a direct access to the USB-driver from the user software is possible.Special features of the version USB-DMX STAGE-PROFI MK2:Galvanically isolated DMX-outputAluminium housingNeutrik XLR-feamle 5 pinScrewable USB connectionStandAlone function for replaying the light scenes without PC8k Byte memory for the StandAlone-light sceneThis interface will be supportet iuter alia: DMX-ConfiguratorFreeStyler (2nd Generation interface)DMXControl (Version2)PC_DimmerIP-SymconTLC (Theater Light Control)Light@NightVVVVMagicQ Specifications  Power supply:5V / 500mA via USB  PC-connection:USB 1.1 / USB 2.0  DMX-output:512 channels galvanicallly isolated DMX output 5 pin XLR-female  Dimensions:32x27x90 mm  USB-driver:FTDI D2XX & VCP (virtaul COM-Port)  Operating system:Windows® 7,Windows® 8 Product DownloadsUSB-DMX STAGE-PROFI MK2Bedienungsanleitung USB-DMX STAGE-PROFI MK2User Manual USB-DMX STAGE-PROFI MK2USB Driver Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Devolopment

 PixxSplitter DR8+The PixxSplitter DR8+ is a manifold for a digital LED signal to up to 8 connected digital LED-Strips.Up to 999 RGB or RGBW pixels can be connected to each output.The input signal, coming from a pixel controller, contains control information for all connected pixels.This allows to control up to 8 different digital LED-Strip elements with just one control unit. The wiring is radial.In the Default-Setting, the number of pixels on each output is set to 100 RGB pixels.In total a pixel controller drives 800 RGB pixels, whereby the first 100 pixels (pixels 1-100) are connected to output 1,the second 100 pixels (pixels 101-200) to output 2, etc. Specifications  Power supply:8-24V / 100mA 5V / 100mA via Mini-USB connector  Input:Control signal for digital LED stripes  Output:8x control signal for digital LED stripes  Compatible LED-Types:SK6812 GS8208 WS2811, WS2812(B) INK1002, INK1003  Color sequence:RGB / RGBW (selectable)  Number of pixel/output:1 - 999 pixel  Display:4 digit 7 segment display 1x RGB-LED  Controls:3 buttons (UP / DOWN / MENU)  Dimensions:105mm x 90mm x 60mm Produkt DownloadsPixxSplitter DR8+Bedienungsanleitung PixxSplitter DR8+User Manual PixxSplitter DR8+USB Driver PixxSplitter DR8+Firmware

 DMX-RELAIS 8 INRUSHThe DMX-RELAIS 8 INRUSH is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct voltage (DC) or alternating voltage (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Several operation modesThe DMX-RELAIS 8 INRUSH offers several operating modes which can be set via RDM:- Hysteresis 127/128- Hysteresis 0/1- Hysteresis 100/150- Exclusive- Monostable 1SecondTop hat rail mounting availableSuitable for the DMX-RELAIS 8 INRUSH the DIN rail housing 1050 is available as accessory.Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation. Specifications  Power supply:12-24V DC (280mA @ 12V / 180mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Connectors:screw terminals  Dimensions:99mm x 82mm Product DownloadsDMX-RELAIS 8 INRUSHBedienungsanleitung DMX-RELAIS 8 INRUSHUser Manual

 HUB75E Dot-Matrix ControlThe HUB75E Dot-Matrix Control is a controller for controlling several Dot-Matrix-Displays.Up to 5440 RGB-PixelUp to 5440 RGB pixels can be controlled by the HUB75E Dot-Matrix Control.Adjustable Dot-Matrix ParameterThe parameters for the dot matrix are adjustable. So, different dot-matrixdisplays can be controlled via the HUB75E Dot-Matrix Control.Art-Net™ or TPM2.netThe data transfer occurs per Art-Net™ or TPM2.net.Muteable Status-LEDsThe LED-Display on the HUB75E Dot-Matrix Control is disengageable via ArtNet-Command (AcLedMute)or via time control. This is very helpful on stages to avoid disturbing “light points”.Easy Configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible any time by PC, Smartphone or tablet.For an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The network settings can be leaved unchanged and the IP can be configured without any problems. Combinable with WiFi-ComponentsIn connection with a WLAN-Bridge the HUB75E Dot-Matrix Control can be integrated in a WLAN-Network.Firmware-Update-FunctionTo use future functions the HUB75E Dot-Matrix Control provides a Firmware-Update-Function.This can be started from a web browser, so no direct access to the device is necessary!This Interface will be supported from:Madrix - LED Lighting Control SolutionsDMX-ConfiguratorJinx!or any other software with ArtNet-output Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:5V DC (200mA@5V)  Connection:Ethernet: RJ45 Power: pin screw clamp HUB75E: 16pin connector  Data Fail:Hold Blackout Saved Picture  Dot-Matrix Parameter:Panel number (1-10) Panel width (32, 64, 96, 128) Panel height (8, 16, 32, 64) Panel Scan Rate (1/4, 1/8, 1/16, 1/32) Panel RGB Groups (1, 2) Color depth (3-24 Bit)  Protocol:Art-Net™ 4 (max 32 universes) TPM2.net (max 16384 channels)  Color sequence:RGB  User Picture:User configurable output which is outputted after power on or after data fail  Status LED:Green: Ethernet-Connection available Yellow: Data are transferred  Dimensions:80mm x 50,5mm (without screw clamps)  Delivery includes:1x HUB75E Dot-Matrix Control 1x Screw connection clamps 2 pin 1x Quick guide german / english Product DownloadsHUB75E Dot-Matrix ControlBedienungsanleitung HUB75E Dot-Matrix ControlUser Manual HUB75E Dot-Matrix ControlFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 DMX-Splitter 6The DMX-Splitter 6 is a compact DMX-Divider with one DMX-Input signal which providesthese at six galvanically isolated outputs.6 galvanically isolated outputsThe DMX-Splitter 6 is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit.The voltage range is between 8V up to 24V.Compact design for top hat rail mountingThe DMX-Splitter 6 is suitable for installation in top hat rail mountingswith a width of 10,5cm due to its small size.LED-DisplayA multicolor LED clearly indicates the current operating status.Top hat rail mounting availableSuitable for the DMX Splitter 6 the DIN rail housing 1050 is available as accessory. Specifications  Power supply:8-24V DC (350mA@12V; 200mA@24V)  Input:512 channels  Output:6x 512 channels galvanically isolated  Status Display:Multi-color LED  Connections:screw terminals  Dimensions:99mm x 82mm Product DownloadsDMX-Splitter 6Bedienungsanleitung DMX-Splitter 6User Manual

 DMX-Splitter 4 RDMThe DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 RDM is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.DMX and RDMIn contrast to pure DMX splitters, the RDM information is passed in bothdirections in addition to the DMX signal.RDM filterWhen the RDM filter is switched on, all RDM information are filtered out and no longer passedon to the outputs. This can prevent malfunction / flickering of non-RDM-capable devices.Settings possible via RDMThe DMX-Splitter 4 RDM is recognized as an independent RDM device and settings can be made via RDM.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit. The voltage range is between 8V up to 24V.RGB-LED-DisplayThree RGB LEDs clearly indicate the current operating status.Top hat rail mounting availableSuitable for the DMX-Splitter 4 RDM the DIN rail housing 700 is available as accessory. Specifications  Power supply:8-24V DC  Power consumption:200mA@12V / 130mA@24V (no load)  Protocol:DMX512 RDM  Output:4x DMX512 / RDM galvanically isolated  RDM filter:Can be switched on / off  Connections:screw terminals  Dimensions:64,2mm x 82mm Product DownloadsDMX-Splitter 4 RDMBedienungsanleitung DMX-Splitter 4 RDMUser Manual

<table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;DMX-LED-Dimmer X9HR</strong></span></td>  </tr></table><br>The DMX-LED-Dimmer X9HR is especially designed for controlling RGB LED-Stripes.<br>The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.<br><br><strong>9 Outputs</strong><br>The DMX-LED-Dimmer X9HR has 9 outputs to which LEDs can be connected.<br>All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.<br><br><strong>High Power Outputs</strong><br>The outputs can drive a current up to 10A.<br>So it is possible to connect a maximum load of 120W (12V) / 240W (24V)<br><br><strong>0% bis 100% dimmable</strong><br>The connected LEDs are dimmed by PWM from 0% to 100%.<br><br><strong>For voltages from 12V up to 24V</strong><br>The DMX-LED-Dimmer X9HR operates with supply voltages from 12V up to 24V. The LED voltage can<br>be different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.<br><br><strong>DMX-FAIL Function</strong><br>An adjustable DMX FAIL function offers the option to get in case of lost<br>DMX signal the current state (HOLD) or assuming a preset value.<br><br><strong>DMX-Master Dimmer</strong><br>Optionally, another DMX channel can be activated as Master Dimmer (all outputs)<br>or one master dimmer per RGB group. The global master dimmer is fixed at<br>DMX address 1 and can be used as system master dimmer.<br><br><strong>Adjustable dimming curve</strong><br>The dimming curves can be configured individually for each output.<br><br><strong>RDM support</strong><br>The DMX-LED-Dimmer X9HR allows configuration by RDM via DMX.<br><br><strong>SubDevice-Mode</strong><br>In SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.<br><br><strong>LED-State Display</strong><br>The DMX state is indicated via the LED status.<br><br><strong>Firmware-Update-Function</strong><br>To use future functions, the DMX-LED-Dimmer X9HR offers a firmware update function.<br><br><strong>Top hat rail housing available</strong><br>The top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR.<br><br><br><img class="dmxmadein" src="https://www.media.dmx4all.store/images/made-in-germany.png" border="0"><br><br><br><!-- Specifications --><table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" border="0" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Specifications</strong></span></td>  </tr></table><table border="0" cellspacing="1" cellpadding="1">  <tr>    <td width="300">&nbsp;</td>    <td width="500">&nbsp;</td>  </tr>  <tr>    <td>Power supply:</td>    <td>7-24V DC</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>80mA@12V / 100mA@24V (without load)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>LED voltage:</td>    <td>7-24V DC (no AC voltage !)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Protocol:</td>    <td>DMX512</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>RDM<br></td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>DMX channels:</td>    <td>9 channels with 8Bit-Mode</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>18 channels with 16Bit-Mode</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>+ optional Master-Dimmer-Channels</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Masterdimmer:</td>    <td>None / Global / RGB / System</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>DMX-FAIL:</td>    <td>Hold / 0%-100%</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>8bit Mode</td>    <td>PWM-Frequency</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>488 Hz with LookUp-Table</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>2 kHz or 4 kHz without LookUp-Table</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>16bit Mode</td>    <td>PWM-Frequency</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>488 Hz without LookUp-Table</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Output:</td>    <td>9 PWM-signal</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>common supply voltage anode (PLUS)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Output current:</td>    <td>max. 10A each output</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>In sum 90A with all GND connections</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Output power:</td>    <td>9x 120W (12V)  /  9x 240W (24V)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Energy-Save output:</td>    <td>Control output for switching off the load power supply units</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>StandAlone function:</td>    <td>9 internal StandAlone programs</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Connections:</td>    <td>Screw terminals</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Dimensions:</td>    <td>99mm x 82 mm</td>  </tr></table><br><br><!-- Produkt Downloads --><table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Produkt Downloads</strong></span></td>  </tr></table><div id="dmx4all-buttons"> <a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_german/dmx_led_dimmer_x9hr_german.pdf" target="_blank">DMX-LED-Dimmer X9HR<br>    <span><span class="german-lang">Bedienungsanleitung</span></span></a>    <br>    <a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_english/dmx_led_dimmer_x9hr_english.pdf" target="_blank">DMX-LED-Dimmer X9HR<br>    <span><span class="english-lang">User Manual</span></span></a>    <br>    <a class="drivers-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/drivers/driver_x32_x64_dmx_led_dimmer_x9hr.zip">DMX-LED-Dimmer X9HR<br>    <span><span class="windows-os">USB Driver (ab V2.2)</span>Version 6.0.0.0</span></a>    <br>    <a class="firmware-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/firmware/firmware_dmx_dimmer_x9hr.zip">DMX-LED-Dimmer X9HR<br>    <span><span class="firmware-os">Firmware (ab V2.2)</span></span></a></div><!-- Software & Tools --><table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Software &amp; Tools</strong></span></td>  </tr></table><div id="dmx4all-buttons"> <a class="software-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/software/dmx4all_software_pack.zip">DMX-Configurator V2<br>    <span><span class="software-os">Windows 32 &amp; 64bit</span></span></a>    <br>    <a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_german/dmx4all_dmx_configurator_german.pdf" target="_blank">DMX-Configurator V2<br>    <span><span class="german-lang">Bedienungsanleitung</span></span></a>    <br>    <a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_english/dmx4all_dmx_configurator_english.pdf" target="_blank">DMX-Configurator V2<br>    <span><span class="english-lang">User Manual</span></span></a></div>

 DMX-Player L MK2The ArtNet-DMX STAGE-PROFI 1.1 is a compact ArtNet (DMX over Ethernet) interface whichcan be used for ArtNet to DMX or DMX to ArtNet. With a standard RJ45 network connector the connection to the ArtNet is made.DMX direction selectableThe DMX direction can be switched depending on use (ArtNet to DMX or DMX to ArtNet).Adjustable DMX-FramerateIn DMX OUTPUT mode, the DMX framerate is adjustable so that this interface is compatible with "slow" DMX devices.ArtNet Merge-FunctionTwo ArtNet sources are output with LTP (Latest) or HTP (Highest) merged on the DMX output.Muteable LED indicator/strong>The LED indicators on the ArtNet-DMX STAGE-PROFI 1.1 are muteable by ArtNet command (AcLedMute) or time-controlled.This is helpful to disturbing "points of light" especially on stages.Easy ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.For easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.High quality and compact designArtNet DMX STAGE-PROFI 1.1 is designed with a 3-pin Neutrik metal XLR connector inside a compact aluminum body.Use together with WiFi componentsIn conjunction with a WiFi-bridge the ArtNet-DMX STAGE-PROFI 1.1 can be integrated into standard WiFi networks.As WiFi-bridge we suggest: TP-Link MiniRouter TL-WR702N oder TP-Link Nano Router TL-WR802NFirmware-Update-FunctionIn order to take advantage of future features, the ArtNet-DMX STAGE-PROFI 1.1 has a firmware update function.This can be launched from the browser so that no access to the device is necessary!DMX4ALL-Command interfaceArtNet DMX STAGE-PROFI 1.1 has another TCP communication interface that is compatible with the LAN-DMX STAGE-PROFI.This interface uses the DMX4ALL-commands via TCP packets. Specifications  Power supply:7–24 V (~45mA @ 12V / ~22mA @ 24V)  Output:DMX signal with 512 channels  Inputs:             Connection:         Program memory:1MByte internal FLASH or optional MicroSD Card (not included)  Control:external switches / matrix    Functions:       Dimensions:64,2mm x 82mm Product DownloadsDMX-Player L MK2Bedienungsanleitung DMX-Player L MK2User Manual DMX-Player L MK2USB Driver 32 & 64bit - Version 6.0.0.0 DMX-Player L MK2Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX4ALL CommandsDMX4ALL Commands for Devolopment

<table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;DMX-LED-Dimmer BB4</strong></span></td>  </tr></table><br>The DMX-LED-Dimmer BB4 is designed to control LEDs, which operate with<br>constant current and works with up to 24V of the LED voltage.<br><br><br><strong>Regulable output current</strong><br>The DMX LED Dimmer BB4 has 4 outputs where the LEDs are operated with a<br>current of 0 to 330mA-1500mA. The level of the output current can be adjusted via DMX.<br><br><strong>Voltages up to 24V</strong><br>The DMX-LED-Dimmer BB4 works with supply voltages up to 24V.<br><br><strong>DMX-FAIL Function</strong><br>An adjustable DMX FAIL function offers the option to hold the current state (HOLD)<br>or to take a preset value in case of a failed DMX signal.<br><br><strong>DMX-Master-Dimmer</strong><br>The DMX-LED-Dimmer BB4 has various Master Dimmers.<br><br><strong>Up to 1024 brightness steps</strong><br>Each output driver has a resolution of 1024 steps in which the output<br>current is controlled. The special driver design allows a constant current<br>which is not modulated by a PWM for the dimming process.<br><br><strong>Two adjustable operation modes</strong><br>Control with 2 DMX channels per output, the first DMX channel allows<br>coarse control and the second DMX channel allows fine control.<br><br><strong>Settable dim curve</strong><br>The dimming curves are freely configurable for each output.<br><br><strong>RDM support</strong><br>The DMX LED dimmer X9HR allows configuration via RDM over DMX.<br><br><strong>LED-State-Display</strong><br>The integrated multifunctional display shows the current status of the device.<br><br><strong>Suitable for top hat rail mounting</strong><br>The top-hat rail housing 1050 is available as optional accessory for the DMX-LED-Dimmer BB4.<br><br><br><img class="dmxmadein" src="https://www.media.dmx4all.store/images/made-in-germany.png" border="0"><br><br><br><!-- Specifications --><table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" border="0" align="absmiddle"><span style="font-size: large;"><strong> ArtNet Player 4</strong></span></td>  </tr></table><table border="0" cellspacing="1" cellpadding="1">  <tr>    <td width="300">&nbsp;</td>    <td width="500">&nbsp;</td>  </tr>  <tr>    <td>Power supply:</td>    <td>8-24V DC (maximum 26V)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>50mA (without connected load)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Drop voltage:</td>    <td>max. 2V</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Output current:</td>    <td>4x 0 – settable output current (330mA – 1500mA)</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>Sustained short circuit / 1024 steps at each output</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Protokoll:</td>    <td>DMX512</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>RDM</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>DMX channels:</td>    <td>4 channels with 8Bit control and Lookup table</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>8 channels with 10Bit control</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>DMX-FAIL:</td>    <td>Hold / 0%-100%</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Masterdimmer:</td>    <td>Kein / Global / System</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>PWM-Frequency:</td>    <td>no PWM on output</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>StandAlone-Function:</td>    <td>9 internal StandAlone programs</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>Switching on individual outputs</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Operation temperature:</td>    <td>0°C up to +45°C</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>Thermal overload protection per output</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Connection:</td>    <td>Screw terminals</td>  </tr>  <tr>    <td>&nbsp;</td>    <td>&nbsp;</td>  </tr>  <tr>    <td>Dimensions:</td>    <td>99mm x 82mm x 47mm</td>  </tr></table><br><!-- Produkt Downloads --><table width="800" cellspacing="1" cellpadding="1">  <tr>    <td><img src="https://www.media.dmx4all.store/images/kategorie-head.png" align="absmiddle"><span style="font-size: large;"><strong>&nbsp;Product Downloads</strong></span></td>  </tr></table><div id="dmx4all-buttons">  <a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_german/dmx_led_dimmer_bb4_mk2_german.pdf" target="_blank">DMX-LED-Dimmer BB4<br>  <span><span class="german-lang">Bedienungsanleitung</span></span></a>  <br>  <a class="document-button" onfocus="this.blur()" href="https://www.dmx4all.de/download/manuals_english/dmx_led_dimmer_bb4_mk2_english.pdf" target="_blank">DMX-LED-Dimmer BB4<br>  <span><span class="english-lang">User Manual</span></span></a></div>

 DMX-IEC62386 GatewayThe DMX-IEC62386 gateway is a bidirectional protocol converter combining two devices in onewith its compact design. Depending on the individual application, the DMX-IEC62386 gateway,using a 2-way communication, is able to convert both, the DMX signal into IEC62386 controlcommands and IEC62386 control commands into DMX values.Especially, the reduced size and the “on-board” BUS power supply makes the DMX-IEC62386 gatewaya space-saving and price-optimized all-rounder. There is no need for an external power supply,as the module has an own slot for the specially developed BUS power supply.Overall, the DMX-IEC62386 gateway is a bidirectional protocol converter with an integratedBUS power supply thanks to its clever design, combined with many useful functions that areparameterized exclusively in a decentralized manner via remote device management.Several communicational directionsThe DMX-IEC62386 Gateway can be run as IEC62386-Output device (DMX as input) orDMX-Output device (IEC62386 as input).RDM SupportThe DMX-IEC62386 Gateway allows a RDM configuration via DMX.Supports single-devices and /or device-groups or BroadcastThe protocol converter can send DMX-Signals to IEC62386-Bus-Control-Commands via broadcastor send focused to single devices or groups.Settable DMX-AddressesFor each device or group an own DMX-Starting address can be assigned.Individual DMX-FAIL ActionIn the case of an DMX-Signal fail for each device or each group an individual behavior can be determined.Configurable Working ModeThe working mode defines how to call the connected device or group. The options ARC-Power /%-Power / Color Temperature / RGB / RGB+W / RGB+WA / RGB+WAF are available.OFF as ARC LEVEL or OFF COMMANDWith a dim value of 0% (OFF) the behavior between send an OFF-Command and send an ARC-Level is adjustable.BUS-Command RefreshAn automatic Refresh of the BUS-Command can be activated and is also executed if no DMX signal is present.The execution interval can be change between 10s and 600s.Lockable Device SettingsThe RDM parameters Lock Pin and Lock State allow or prohibit changing saved RDM parametersto prevent unauthorized changes.64 Devices in DMX-ValuesFor all 64 IEC62386-Devices the brightness value is outputted at one DMX-Channel.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.RGB-LED-DisplayA RGB-LED shows the current device status clearly.Firmware-Update-FunctionTo us future functions the DMX-IEC62386 Gateway offers the Firmware-Update-Function via RDM.Top hat rail housing availableSuitable for the DMX-IEC62386 the DIN rail housing 350 or DIN rail housing 350 flat is availableas accessory. Together with the top-hat rail housing 350 or 350 flat, the interface is optimallysuited for control cabinet installation. Specifications  Power supply:12-48V DC 50mA@12V / 30mA@24V / 15mA@48V  Protocol:DMX512 / RDM IEC62386  Communication direction:DMX - IEC62386 IEC62386 - DMX  Quantity Devices/Groups:Up to a total of 64 devices/groups as SubDevice or Broadcast  Parameter per SubDevice:DMX-Start address Personality (Device 1-64 or Group 1-16) DMX-Fail-Mode (Hold / 0-100%) Working Mode  Working Mode:Brightness level (%) Brightness White CCT (DT8) Tunable level (arc power) RGB (RGBWAF DT8) RGB+W (RGBWAF DT8) RGB+WA (RGBWAF DT8) RGB+WAF (RGBWAF DT8)  DMX-FAIL:Hold / 0-100%  LED-Display:RGB-LED  Internal BUS power supply:attachable, available as accessory  Connections:Screw terminals  Dimensions:29,2mm x 82mm Produkt DownloadsDMX-IEC62386 GatewayBedienungsanleitung DMX-IEC62386 GatewayUser Manual DMX-IEC62386 GatewayFirmware

 DMX UNIVERSE DR1.1 RDMThe DMX UNIVERSE DR1.1 RDM is a compact bidirectional Ethernet Gateway whichcan be used for Art-Net™/TPM2/sACN to DMX/RDM or DMX to Art-Net™.With a standard RJ45 network connector the connection to the ArtNet is made.DMX direction selectableThe DMX direction can be switched depending on use.Adjustable DMX-FramerateIn DMX OUTPUT mode, the DMX framerate is adjustable so that this interface is compatible with "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™, which enables connected RDM devices to be configured via Art-Net™ with the appropriate software.Free RDM-SoftwareTo set parameters via RDM our free software RDM-Configurator is available as download on our website www.dmx4all.de .Muteable LED indicatorThe LED indicators on the DMX UNIVERSE DR1.1 RDM are muteable by Art-Net™ command (AcLedMute) or time-controlled.This is helpful to disturbing "points of light" especially on stages.DHCPThe DMX UNIVERSE DR1.1 RDM has a DHCP function for automatic addressing in the network.Internal stand-alone programs The internal programs make the DMX UNIVERSE DR1.1 RDM a stand-alone device. The programs can be calledup via the web interface, when the device is switched on, or when Art-Net™ data is missing.Easy Webbrowser-ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.DMX-Monitor The DMX monitor is available via the web interface. This means that the current DMX valuescan be displayed and checked simultaneously without any additional software.DMX-Fader The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.Easy Network ConfigurationFor easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.Compact designThe DMX UNIVERSE DR1.1 RDM is designed for mounting in a 350mm DIN rail housing.Use together with WiFi componentsIn conjunction with a WiFi-bridge the DMX UNIVERSE DR1.1 RDM can be integrated into standard WiFi networks.Firmware-Update-FunctionIn order to take advantage of future features, the DMX UNIVERSE DR1.1 RDM has a firmware update function.This can be launched from the browser so that no access to the device is necessary!DMX4ALL-Command interfaceThe DMX UNIVERSE DR1.1 RDM has another communication interface that is compatible withthe LAN-DMX STAGE-PROFI. This interface uses the DMX4ALL commands via TCP or UDP packets. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (150mA@12V; 100mA@24V)  Connection:Ethernet: RJ45 Power/DMX: Screw terminal  DMX:Selectable: - 512 channels OUT - 512 channels IN  DMX-Framerate:Adjustable (5 - 44 fps)  RDM:RDM via Art-Net™  Data Fail:HOLD last data(DMX-OUT)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM  DMX-IN Fail:HOLD last data(DMX-IN)CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES  Protocol:Art-Net™ TPM2 sACN (Unicast) DMX4ALL commands (as well as the LAN-DMX STAGE-PROFI)  Internal program:User-configurable stand-alone program  Status LED:Green: Ethernet Connection Yellow: Datatransfer  Dimensions:29,2mm x 82mm Product DownloadsDMX UNIVERSE DR1.1 RDMBedienungsanleitung DMX UNIVERSE DR1.1 RDMUser Manual DMX UNIVERSE DR1.1 RDMEthernet VCP Driver 32 & 64bit - Version 1.10 DMX UNIVERSE DR1.1 RDMFirmware DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 DMX-Relais/Analog 4The DMX-Relais/Analog 4 is designed for switching loads of several kinds.Four potential free contacts with up to 8A switching power are available.Additional four analog outputs with 0-10V or 1-10V can be used to control systems with analog inputs.This relay outputs are suitable for switching DC or AC voltage.A DMX FAIL function hold the relays and analog states unchanged or switch off at a loss of DMX signal. Specifications  Power supply:12-24V DC / 250mA  Input:4 up to 12 DMX-channels  Output:4 switching contacts (close) each max. 8A / 250V~ (165A/20ms Switch-on peak current) 4x analog output 0-10V / 1-10V  DMX-FAIL:Hold / Off  Connectors:screw terminals  Dimensions:99 x 82mm Product DownloadsDMX-Relais/Analog 4Bedienungsanleitung DMX-Relais/Analog 4User Manual

 ArtNet-LED-Dimmer 4 MK2+The ArtNet-LED-Dimmer 4 MK2 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via removable screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).High Power OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.10 user defined color changes/programsThe ArtNet-LED-Dimmer 4 MK2 offers more than 10 user defined color changes.These can be created via the web browser or the Android App „DMX4ALL Remote“.Disengageable LED-Display The LED-Displays at the ArtNet-LED-Dimmer 4 MK2 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.For an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The network settings can be leaved unchanged and the IP can be configured without any problems.Controlling via browser or App with Colorwheel / Slider The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.High quality and compact design The ArtNet-LED-Dimmer 4+ MK2 is manufactured with removable clamps.Furthermore, the ArtNet LED Dimmer 4+ MK2 is mounted in a compact aluminum housing.Firmware-Update-Function To use future functions the ArtNet-LED-Dimmer 4 MK2 offers a Firmware-Update-Function.This can be started from a web browser, so that no direct access to the device is necessary!DMX4ALL Communication-Interface The ArtNet-LED-Dimmer 4 MK2 has a further TCP-Communication-Interface.This interface uses the DMX4ALL-Commands with TCP-Commands via TCP-Packages to Port 10001. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:12-24V DC / 100mA (=LED voltage)  LED voltage:12-24V DC (no AC voltage !)  Connection:RJ45 Ethernet  LED-connection:R/G/B + W screw terminals max. 10A with common anode (+)  USB-connection:5V / 500mA for power supply external devices (e.g. WLAN-bridge)  PWM-Frequency:250 Hz  Dimensions:115mm x 74mm x 23mm  Protocol:Art-Net 3 ™ DMX4ALL Commands Product DownloadsArtNet-LED Dimmer 4 MK2+Bedienungsanleitung ArtNet-LED Dimmer 4 MK2+User Manual ArtNet-LED Dimmer 4 MK2+Firmware Software & ToolsIP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 ArtNet PixxControl PX1The ArtNet PixxControl PX1 is a compact ArtNet (DMX over Ethernet) interface,which converts ArtNet directly to a control signals for several digital LEDs.For the ArtNet network connection a standard RJ45 network connector is used.Output with selectable pixel data protocolThe ArtNet PixxControl PX1 has one configurable output. The pixel data protocol (control signal)for different LED pixel types and other parameters can be selected separately.Adjustable color sequenceThe RGB color sequence is adjustable, which allows flexible uses.It is also possible to control RGBW pixels. Furthermore, a SingleColor optioncan be selected, where each pixel needs only one channel.Adjustable pixel groupThe ArtNet PixxControl PX1 supports pixel groups with adjustable length.Each pixel group behaves like a single pixel controlled via 3 DMX channels (RGB)or 4 DMX channels (RGBW). That reduces channels in installations with many pixels.RGB-LED-DisplayThe RGB LED displays the current operation status of the ArtNet PixxControl PX1 clearly.Muteable LED-DisplayThe LED displays on the ArtNet PixxControl PX1 can be switched off via ArtNet command (AcLedMute),RDM (DISPLAY_LEVEL) or time-controlled. This is especially helpful on stages to avoid disturbing "light spots".RDMThe important parameters such as the pixel type, the pixel group size or the color sequencecan be set individually for both data outputs via RDM.Free RDM-SoftwareTo set parameters via RDM our free software RDM-Configurator is available as download on our website www.dmx4all.de .DMX4ALL Communication-InterfaceThe ArtNet PixxControl PX1 has another communication interface which uses the DMX4ALL commands via TCP or UDP.Easy ConfigurationA user-friendly configuration via a web browser allows a quick and uncomplicated setting of all parameters.No special software is needed a normal web browser is enough. This means that the configuration is possibleat any time from a PC, smartphone or tablet.To set the IP address easily, the IP Configurator is offered as free download as PC tool or Android app.This allows the network settings of the PC or Android device to remain unchanged in order to configurethe IP of the ArtNet PixxControl PX1.Combinable with WiFi componentsThe ArtNet PixxControl PX1 can be integrated into WLAN networks in combination with a WLAN bridge.Firmware update functionTo use future functions, the ArtNet PixxControl PX1 offers a firmware update function.The update can be started from a web browser, so no access to the device is necessary!Top hat rail housing availableThe top-hat rail housing 350 or 350flat is available as accessory for the ArtNet PixxControl PX1. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (100mA@12V; 50mA@24V)  Connection:RJ45 Ethernet  5pin screw terminal  Protocol:Art-Net™ 4 (downward compatible) RDM  LED types:APA-101, APA-104, APA-102,max. 1360 pixel DycoLED PB3, DycoLED PB5,  GS8208,  INK1002, INK1003,  LC8808,  LPD1101, LPD8803, LPD6803, LPD8806,  LPD1886 8Bit, LPD1886 12Bit (8Bit controlled),  SK6812, SK6822, SK9822,  SM16703,  TM1804, TM1812, TM1814, TM1829, TM1934,  UCS1903, UCS1912, UCS2903, UCS2912,  WS2801, WS2811, WS2812, WS2812B,  WS2813, WS2815, WS2818, WS2821     LPD1886 12Bit (12Bit controlled),max. 680 pixel UCS9812 (8Bit controlled), UCS9812 (16Bit controlled)   Color Sequence:RGB selectable / RGBW SingleColor white, red, green, blue  Pixel groups:1 up to 127 pixel / all  Gamma correction:Selectable for LPD1886 12Bit (8Bit controlled), UCS9812 (8Bit controlled)  LED-Display:RGB Status-LED Ethernet-Status-LEDs yellow and green  Dimensions:29,2mm x 82mm Product DownloadsArtNet PixxControl PX1Bedienungsanleitung ArtNet PixxControl PX1User Manual ArtNet PixxControl PX1Firmware Software & ToolsIP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note RDM Configurator (ArtNet Produkte)Windows 32 & 64bit RDM ConfiguratorBedienungsanleitung RDM ConfiguratorUser Manual

 ArtNet-DMX Mux24The ArtNet-DMX Mux24 has 16 digital inputs and 8 additional inputs which are adaptableanalog or digital. The output occurs via ArtNet and DMX. For each input the function (Mode) as well as the channels to control are adjustable. A user-friendly configuration via a web browser allows a fast an uncomplicatedsetting for all parameters. The firmware of the ArtNet-DMX Mux24 can be update easy over the network. Specifications  Power supply:7-24V DC / 0,5A  Ethernet:1x RJ45  DMX-OUT:1x 512 channels  Inputs:16x Long Distance Digital Input 8x Analog Eingang or Long Distance Digital Eingang  Mode:Switch Button On Button Off Button On/Off Dimmer Up/Down Dimmer Up Dimmer Down Button On + Dimmer Up Button Off + Dimmer Down Button On/Off + Dimmer Up/Down Analog 0-10V Analog 0-5V Analog 1-10V  Timer:4 configureable timer  Dimensions:99 x 82 x 20mm Product DownloadsArtNet-DMX Mux24Bedienungsanleitung ArtNet-DMX Mux24User Manual ArtNet-DMX Mux24Firmware Software & ToolsIP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 DMX TwinPOE AP RDMThe DMX TwinPOE AP RDM is a compact ethernet interface (DMX via Ethernet),which can be used for Art-Net™/TPM2/sACN to DMX/RDM or DMX to Art-Net™.Two galvanically separated DMX UniversesThe DMX TwinPOE AP RDM offers two separated DMX connections which can be used as DMX-OUT or DMX-IN.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devicesto be configured via Art-Net™ using corresponding software.Multi-color LED displayThe LED-Display at the DMX TwinPOE AP RDM can be switched off via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.LSA-PLUS Quick connection technologyThe LSA insulation displacement technology allows the individual wires to beattached quickly (e.g. for network installation cables).Easy ConfigurationA user-friendly configuration via web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible any time from PC, Smartphone or tablet. Compact designThe DMX TwinPOE AP RDM with a size of 66mm x 66mm is suitable forinstallation in the optionally available wall-mounted housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Firmware-Update-FunctionTo be able to use future functions, DMX TwinPOE AP RDM offers a firmware update function.This can be started from the web browser, so no access to the device is necessary!DMX4ALL communication interfaceThe DMX TwinPOE AP RDM has an additional communication interface that uses DMX4ALL commands via TCP or UDP.Surface housing availableA surface-mounted housing suitable for the DMX TwinPOE AP RDM is available as an accessory. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:PoE with IEEE 802.af or 8-48V DC (200mA@12V; 110mA@24V; 65mA@48V)  Connection:Ethernet: LSA-PLUS connection Power: Screw terminals DMX: Pin header RM2,54  DMX:adjustable each DMX connection: - 512 channels OUT - 512 channels IN  DMX-Framerate:adjustable (5 - 44 fps)  RDMRDM via Art-Net™ on-/off switchable  DATA FAIL (DMX-OUT):HOLD last data CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM  DMX-IN FAIL (DMX-IN):NO DATA HOLD last data CLEAR all to 0% SET all to 100%  Protocol:Art-Net™ TPM2 sACN (Unicast) DMX4ALL commands  Internal program:User configurable Stand-Alone program  LED-Display:Multi-Color-LED (RGB)  Dimensions:66mm x 66mm Product DownloadsDMX TwinPOE AP RDMBedienungsanleitung DMX TwinPOE AP RDMUser Manual DMX TwinPOE AP RDMEthernet VCP Driver 32 & 64bit - Version 1.10 DMX TwinPOE AP RDMFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual IP Configurator (ArtNet Produkte)Windows 32 & 64bit IP ConfiguratorAnwendungshinweis IP ConfiguratorApplication Note

 DMX-Splitter 6+The DMX-Splitter 6+ is a compact DMX-Divider with one DMX-Input signal which providesthese at six galvanically isolated outputs.6 galvanically isolated outputsThe DMX-Splitter 6+ is a compact DMX-Divider with one DMX-Input signal which providesthese at four galvanically isolated outputs.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit.The voltage range is between 8V up to 24V.Compact design for top hat rail mountingDue to its small size, the DMX Splitter 6+ is suitable for installationon DIN rails with a width of 10.5 cm.LED-DisplayA multicolor LED clearly indicates the current operating status. Specifications  Power supply:8-24V DC (350mA@12V; 200mA@24V)  Input:512 channels  Output:6x 512 channels galvanically isolated  Status Display:Multi-color LED  Connections:screw terminals  Dimensions:105mm x 90mm x 60mm Product DownloadsDMX-Splitter 6+Bedienungsanleitung DMX-Splitter 6+User Manual

 DMX-RELAIS 8 INRUSH+The DMX-RELAIS 8 INRUSH+ is designed for several control tasks.8 potential free switching outputsThe DMX-RELAIS 8 INRUSH has 8 potential free switching outputs (Closer / NO) up to 8A switching capacity.Switching contact for direct and alternating voltageThe relay interface is suitable to direct current (DC) or alternating current (AC).DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD) orto adopt a predefined value if the DMX signal fails.RDM supportThe DMX-RELAIS 8 INRUSH+ allows the configuration via RDM or DMX.Free RDM softwareFor setting the parameters via RDM, our free RDM Configurator softwareis available for download on our website www.dmx4all.de.Lockable device settingsThe RDM parameters Lock Pin and Lock State allow or prohibit changingsaved RDM parameters to prevent unauthorized changes.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address,operating mode and DMX FAIL behavior via RDM.Touch-ControlThe DMX-RELAIS 8 INRUSH+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status displayVia a RGB status display the DMX reception is shown.Mute able LED-DisplayThe LED-Display at the DMX-RELAIS 8 INRUSH+ can be switched off via RDM command or time-controlled,so that no disturbing light sources are present during operation.Several operation modesThe DMX-RELAIS 8 INRUSH+ offers various operation modes. Specifications  Power supply:12-24V DC (300mA @ 12V / 200mA @ 24V)  Protocol:DMX512 RDM  DMX-Channels:up to 8 DMX-channels  DMX-FAIL:Hold / 0-100%  Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second  Output:8 potential-free switching output (closer / NO) each max. 8A 165A@20ms Switch-on peak current  Display:7 segment display RGB LED  TOUCH-Control:3 touch buttons  Connectors:screw terminals  Dimensions:105mm x 90mm x 60mm Product DownloadsDMX-RELAIS 8 INRUSH+Bedienungsanleitung DMX-RELAIS 8 INRUSH+User Manual