Leergehäuse 2x10pol RM2,54 schwarzThe empty housing is suitable for cables with crimp contacts. Specifications  Version:Empty housing  Color:Black  Number of poles:20 (2x10)  RM:2,54mm  Contents:1 pcs

 Specifications  Version:Cable with crimp contact  Color:Yellow  Length:~ 20cm  Contents:10 pcs

 Specifications  Version:Cable with crimp contact  Color:Black  Length:~ 20cm  Contents:10 pcs

 Specifications  Version:Cable with crimp contact  Color:Red  Length:~ 20cm  Contents:10 pcs

 Kabel C - 100cmCable to connect the RGB-outputs of the DMX-LED-Dimmer 16xRGB.Compatible with: - DMX-Dimmer 16xRGB Specifications  Implementation:26AWG  Connection:4 pin female  Length:~ 100cm

 Schrittmotortreiber BRIDGEThe stepper motor driver BRIDGE can be used to connect external stepper motor drivers to the DMX-Stepper-Control.The signals STEP, DIR and ENABLE are bridged by the stepper motor driver BRIDGE to the motor connectionand can thus be used for the control of an external stepper motor driver.Can be used together with our DMX-Stepper-Control.For detailed information, please refer to the instructions for the DMX-Stepper-Control. Technische Daten  Motordriver:none (EXTERNAL)  Connection:2x 8 pin row  Dimensions:15,2mm x 20,3mm  Delivery:1x EXTERNAL DRIVER BRIDGE with presoldered pin row Product DownloadsSchrittmotortreiber BRIDGEBedienungsanleitung Schrittmotortreiber BRIDGEUser Manual

 Schrittmotortreiber A4988Der A4988 ist ein Schrittmotor Treiber mit einstellbarer Strombegrenzung und fünf verschiedenen Microschritt Betriebsarten.Der Treiber ist für Spannungen von 8-35V geeignet und kann einen Strom von 2A per Phase ansteuern.Ersatz Modul für den DMX-Stepper-Control. Technische Daten  Motortreiber:A4988  Arbeitsspannung:8-35 Volt  Arbeitsstrom:2A pro Phase   3.3V und 5V kompatible TTL Signale   Überhitzschutz  Schritte / Steps:Full, 1/2, 1/4, 1/8 und 1/16  Lieferumfang:1x A4988 Stepper Modul inkl. 1 Kühlkörper  

 Kabelset DCable set to connect external controlling elements. Compatible with: - DMX-Player S- DMX-Player L Specifications  Implementation:AWG26  Connection:20 pin male  Length:~ 25cm

 Kabelset BKabelset für die Verkabelung des CONTROL-Anschlusses für externe Bedienelemente.Kompatibel mit:- DMX-Player L MK2 Technische Daten  Ausführung:AWG26  Anschluss:20 poliger Stecker  Länge:~ 25cm

 IR-Sensor Typ ACompatible with: - DMX-Player S- DMX-LED-Dimmer 16xRGB- MADE IN GERMANY - [TAB:Specifications] Specifications  Connection:3 pin female 2,54mm connector  Length:ca. 25cm IR-Sensor Typ ACompatible with: - DMX-LED-Dimmer 16xRGB Specifications  Connection:3 pin female 2,54mm connector  Length:ca. 25cm

 IR-Sensor Typ BCompatible with: - DMX-Player L MK2 Specifications  Connection:20 pin female 2,54mm connector  Length:ca. 25cm

 PixxControl Kabel Open-EndCable to connect digitale LED stripes with the ArtNet Multi PixxControl. Specifications  Connection:4 pin female XLR connector / 4 unconnected cables  Length:~ 50cm Product DownloadsPixxControl Kabel Open-EndBedienungsanleitung

 Kabelset CCable set to connect the RGB-outputs of the DMX-LED-Dimmer 16xRGB.Included are 16 pcs. of the RGB connection cable.Compatible with: - DMX-Dimmer 16xRGB Specifications  Implementation:AWG20  Connection:4 pin male  Length:~ 25cm  Delivery:16 pcs.

 Schrittmotortreiber TMC2208The stepper motor driver TMC2208 is compatible with the Pololu A4988.The components are mounted on the top with which a heat sink can be mounted for better heat dissipation.Can be used together with our DMX-Stepper-Control.For detailed information, please refer to the instructions for the DMX-Stepper-Control. Technische Daten  Motordriver:Trinamic TMC2208  Voltage:5,5-36 V (Stepper)Voltage:3.3V and 5V (control TTL signals)  Current:1,2A (RMS)   Overheat protection  Delivery:1x SilentStepStick with presoldered pin row 1x Heatsink  

 PixxControl Kabel TYP-3Cable to connect the digitale LED stripes with the ArtNet Multi PixxControl.Compatible with: - Digital LED-Stripe LPD1886- Digital LED-Stripe APA-104- Digital LED-Stripe SK6812- Digital LED-Stripe UCS9812- Digital LED-Stripe TM1804- Digital LED-Stripe WS2811/WS2812B Specifications  Connection:4 pin female XLR connector / 3 pin female JST-SM connector  Length:~ 50cm Product DownloadsPixxControl Kabel TYP-3Bedienungsanleitung

 PixxControl Kabel Typ-4 FEMALEConnection cable to connect digital LED-Stripes with the ArtNet Multi Pixxcontrol. Compatble with:- Digital LED-Stripe RGB SK9822 30BL- Digital LED-Stripe RGB SK9822 60BL Specifications  Connection:4 pin female XLR connector / 4 pin female JST SM connector  Length:~ 50cm Product DownloadsPixxControl Kabel Typ-4 FEMALEBedienungsanleitung PixxControl Kabel Typ-4 FEMALEUser Manual

 PixxControl Kabel 4MConnection cable to connect digital LED-Stripes or screens with the ArtNet Multi Pixxcontrol. Compatble with:- Digital LED-Stripe APA102- Digital LED-Stripe LPD8806 Specifications  Connection:4 pin female XLR connector / 4 pin male JST SM connector  Length:~ 50cm Product DownloadsPixxControl Kabel 4MBedienungsanleitung PixxControl Kabel 4MUser Manual

 PixxControl Kabel 4F-LC8808Connection cable to connect digital LED-Stripes with the ArtNet Multi PixxControl. Compatble with:- Digital LED-Stripe RGB LC8808 60WS Specifications  Connection:4 pin female XLR connector / 4 pin female JST SM connector  Length:~ 50cm Product DownloadsPixxControl Kabel 4F-LC8808Bedienungsanleitung PixxControl Kabel 4F-LC8808User Manual

 PixxControl Kabel 4F-GS8208Connection cable to connect digital LED-Stripes with the ArtNet Multi PixxControl. Compatble with:- Digital LED-Stripe RGB GS8208 60WS Specifications  Connection:4 pin female XLR connector / 4 pin female JST SM connector  Length:~ 50cm Product DownloadsPixxControl Kabel 4F-GS8208Bedienungsanleitung PixxControl Kabel 4F-GS8208User Manual

 PixxControl Kabel DMXCable to connect DMX devices with 3 pin XLR to the ArtNet Multi PixxControl.For dmx devices with 5 pin XLR a additional adaptor is needed. Specifications  Connection:4 pin female XLR connector / 3 pin female XLR connector  Length:~ 50cm

 Schrittmotortreiber TMC2100 SilentStepStickTMC SilentStepStick has a configurable microstep resolution from fullstep up to 256 microsteps.To keep it compatible with other firmware made for stepstick or Pololu board it has a configurable interpolation.Can be used together wit our DMX-Stepper-Control. Technische Daten  Motordriver:Trinamic TMC2100  Voltage:8-45 V (Stepper)Voltage:3.3V and 5V (control TTL signals)  Current:1,2A (RMS)   Overheat protection  Microstep Resolution:1...256  Delivery:1x SilentStepStick with preconfigured pin row for DMX-Stepper-Control  

 IR Fernbedienung MK2This IR-remote control MK2 is suitable to - DMX-Player L MK2- SD-Player 8Functions according to device. Please see the device documentation.Important: When using the IR remote control MK2, the latest firmware must be used!!!! Battery CR2025 not included !!! Specifications  Power supply:3V DC via button cell CR2025 ( NOT INCLUDED )  Range:up to 10 m  Dimensions:110 x 46 x 7 mm

 DMX-LED-Dimmer USB-KonfigurationskabelAll DMX4ALL LED-Dimmer can be configured with this cable.Compatible with:- LED-Dimmer X9 HR (up to V2.1)- LED-Dimmer BB4- LED-Dimmer 4xRGB HR Specifications  Length:ca. 1,8m  Colour:Black Product DownloadsDMX-LED-Dimmer USB-KonfigurationskabelUSB Driver LED-Dimmer Configuration ToolWindows 32 & 64bit