DMX-Analog 0-10V 1-KanalThe DMX-Analog Interface 1-Channel is optimized to control a 0-10V or 1-10V device, e.g. an electronic balast. The output output can be set to 0-10V or 1-10V analog signal.With one DMX channel the output is controlled in 256 steps. Specifications  Power supply:12V DC / 50mA  Input:DMX512 / 1 channel  DMX-Fail:Hold / Off / On  Mode::0-10V or 1-10V selectable  Output:1x Analog-Output  256 Steps (DMX-Value 0-255 -> Analogvoltage 0/1-10V)  Output current:max. 10mA  Dimensions:30 x 70 mm Product DownloadsDMX-Analog 0-10V 1 channelBedienungsanleitung DMX-Analog 0-10V 1 channelUser Manual

 DMX-Analog 0-10V 8-KanalThe DMX 0-10V Interface is especially designed to switch not-DMX-suitable devices with an analog input.On the output 8 analog signals with 0-10V output voltage are available.Each output is controllable via a DMX-channel and divided in 256 steps.A output driver on each channel allows loads up to 10mA. Specifications  Power supply:12-24V DC  Current consumption:50mA@12V; 40mA@24V (without connected load)  Protocol:DMX512 RDM  DMX channels:8 channels  DMX-FAILHold / 0-100%  Output:8 outputs with driver each max. 10mA  Resolution:256 steps (8-Bit), linear  Connections:screw terminals  Dimensions:64mm x 82 mm Product DownloadsDMX-Analog 0-10V 8-KanalBedienungsanleitung DMX-Analog 0-10V 8 channelUser Manual