DMX-LED-Dimmer MaxiRGBThe DMX-LED-Dimmer MaxiRGB is specially designed for driving RGB LED strips with 12V or 24V.The 3 separate LED outputs that are independently controllable via DMX can beused for RGB or separate single color LED stripes.Alternatively, internal color gradients can be called without external control.The operating voltage of the DMX-LED-Dimmer MaxiRGB is also the operating voltage of the LED-Stripes. Specifications  Power supply:12-24V DC / 50mA The supply voltage must correspond to the voltage for the LED stripe!  LED voltage:12-24V DC (no AC voltage !)  DMX Input:DMX512 / 3 channels  LED Output:3x (R/G/B) max. 10A each together max. 10A with common anode (+) common power supply  PWM resolution:256 steps (8-Bit), linear  PWM frequency:~240 Hz  StandAlone function:9 internal StandAlone-programs  Connectors:Solder points  Dimensions:70mm x 30 mm Product DownloadsDMX-LED-Dimmer MaxiRGBBedienungsanleitung DMX-LED-Dimmer MaxiRGBUser Manual

 DMX-LED-Dimmer XS3The DMX-LED-Dimmer XS3 is designed to control RGB orsingle-colour LED-Stripes with 12V or 24V.3 OutputsThe DMX-LED-Dimmer XS3 has three outputs to connect LEDs. All outputsare designed at the same, so single-colour or RGB LEDs can be connected.High Power OutputsThe outputs can drive a current up to 2A.So it is possible to connect a maximum load of 72W (12V) / 144W (24V).0% up to 100% dimmableThe connected LEDs are dimmed via PWM from 0% up to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer XS3 runs with a power supply from 12V up to 24V.DMX-FAIL FunctionAn adjustable DMX-FAIL Function offers the option to get, in case oflost DMX signal, the current state (HOLD) or assuming a preset value.DMX-Master dimmerOptionally, another DMX channel can be activated as master dimmer (all outputs).RDM supportThe DMX-LED-Dimmer XS3 allows configuration by RDM via DMX.All parameters can be set with the RDM Configurator.Stand-Alone-FunctionThe DMX-LED-Dimmer XS3 has a user-programmable Stand-Alone-Function,to replay an internal program.LED-Status-DisplayThe DMX receiving is indicated via the LED status display. Specifications  Power supply:12-24V DC 50mA without load  LED voltage:12-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:3 / 4 / 5 channels depend on Personality  DMX-FAIL:Hold / 0%-100% / Stand-Alone  Output:3 PWM-Signals with 8 Bit resolution Common supply voltage  Output current:max. 2A per output max. 6A in sum for all outputs  Output power:3x 24W (12V) / 3x 48W (24V)  PWM-Frequency:244 Hz  StandAlone-Function:User-defined light program  Connections:Solder pads  Dimensions:12mm x 40mm Product DownloadsDMX-LED-Dimmer XS3Bedienungsanleitung DMX-LED-Dimmer XS3User Manual

 DMX-LED-Dimmer MaxiRGB (SR)The DMX-LED-Dimmer MaxiRGB is specially designed for driving RGB LED strips with 12V or 24V.The 3 separate LED outputs that are independently controllable via DMX can beused for RGB or separate single color LED stripes.Alternatively, internal color gradients can be called without external control.The operating voltage of the DMX-LED-Dimmer MaxiRGB is also the operating voltage of the LED-Stripes.SR-Version: With screw connectors Specifications  Power supply:12-24V DC / 50mA The supply voltage must correspond to the voltage for the LED stripe!  LED voltage:12-24V DC (no AC voltage !)  DMX Input:DMX512 / 3 channels  LED Output:3x (R/G/B) max. 10A each together max. 10A with common anode (+) common power supply  PWM resolution:256 steps (8-Bit), linear  PWM frequency:~240 Hz  StandAlone function:9 internal StandAlone-programs  Connectors:Screw connectors  Dimensions:70mm x 30 mm Product DownloadsDMX-LED-Dimmer MaxiRGB (SR)Bedienungsanleitung DMX-LED-Dimmer MaxiRGB (SR)User Manual

 DMX-LED-Dimmer X9The DMX-LED-Dimmer X9 is especially designed for controlling RGB LED-Stripes.The dimmer has 9 PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9 has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9 operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9 can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.RDM supportThe DMX-LED-Dimmer X9 allows configuration by RDM via DMX.LED-State DisplayThe DMX state is indicated via the LED status.Stand-Alone FunctionAs an alternative to DMX control, internal color sequences can be called upvia the address switch without external DMX control.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9. Specifications  Power supply:7-24V DC 80mA@12V / 100mA@24V (without connected LED load)  LED voltage:7-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling  DMX-FAIL:Hold / 0%-100%  Output:9 PWM-signal with 8Bit-resolution Common supply voltage  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V)  PWM-Frequency:244 Hz  Energy-Save output:Control output for switching off the load power supply units  StandAlone function:9 internal StandAlone programs  Connections:Screw terminals  Dimensions:99mm x 82 mm Product DownloadsDMX-LED-Dimmer X9Bedienungsanleitung DMX-LED-Dimmer X9User Manual

 DMX-LED-Dimmer 4The DMX-LED-Dimmer 4 is a compact LED-Dimmer with 4 seperate LED-outputs.These can be used for RGB/ RGB+W or for single color stripes.The connectors for LED,power supply and DMX are made with removable screw terminals.Can be used from 12V to 48VThe DMX-LED Dimmer 4 can be used in a wide power supply range from 12V to 48V.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V) / 240W (48V).Customizable LookUp tablesThe DMX-LED-Dimmer 4 has one LookUp-Table per output.The definition of the LookUp tables is done via the USB port using theprogram DMX-Configurator, which is available as a free download.Removable screw terminalsThe DMX-LED Dimmer 4 is designed with removable screw terminals.16 Million ColorsWith the RGB-LED-Stripe up to 16 million colours can be adjusted.By using an additional single color white stripe it is possible to makecolor neutral illuminations or pastel colours.Firmware-Update-FunctionIn order to take advantage of future features, the DMX-LED-Dimmer 4 has a firmware update function. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:12-48V DC / 50mA without load (=LED voltage)  LED voltage:12-48V DC (no AC voltage !) (=power supply voltage)  DMX-IN:4 channels + optional Master-Dimmer-Channel  DMX-Fail:Hold / Off / On  Ausgang:4 PWM-Signal with 16 Bit resolution common supply voltage  Output current:max. 10A each output with 12V or 24V max. 5A each output with 48V max. 10A in sum through all outputs  Output :120W (12V) / 240W (24V) / 240W (48V)  PWM-Frequency:244 Hz / 4kHz  Master-Dimmer:None / Masterdimmer / System-Masterdimmer  StandAlone-Function:9 internal StandAlone-Programs  Dimensions:80mm x 50,5mm Product DownloadsDMX-LED-Dimmer 4Bedienungsanleitung DMX-LED-Dimmer 4User Manual DMX-LED-Dimmer 4USB Driver - Version 6.0.0.0 DMX-LED-Dimmer 4Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

 DMX-LED-Dimmer 16xRGBThe DMX-LED-Dimmer 16xRGB has 48 outputs which are summarized in 16 RGB groups.Each output is optimal for all RGB-LED-stripes but can be also used for unicoloured LED-stripes.The global master-dimmer (all outputs) or one master-dimmer per RGB-group can be activated.The global master-dimmer can be fixed to the DMX-address 1 as system-master-dimmer. Specifications  Power supply:7-24V DC / 100mA (without connected load)  Input:DMX512 / 48 up to 64 channels  Output:48 PWM-outputs per up to 2A (together 14A)  PWM-Frequency:120 Hz  Dimensions:100 x 60 mm Product DownloadsDMX-LED-Dimmer 16xRGBBedienungsanleitung DMX-LED-Dimmer 16xRGBUser Manual

 DMX-LED-Dimmer X9HRThe DMX-LED-Dimmer X9HR is especially designed for controlling RGB LED-Stripes.The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9HR has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9HR operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB group. The global master dimmer is fixed atDMX address 1 and can be used as system master dimmer.Adjustable dimming curveThe dimming curves can be configured individually for each output.RDM supportThe DMX-LED-Dimmer X9HR allows configuration by RDM via DMX.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Firmware-Update-FunctionTo use future functions, the DMX-LED-Dimmer X9HR offers a firmware update function.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR. Specifications  Power supply:7-24V DC 80mA@12V / 100mA@24V (without load)  LED voltage:7-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-Mode 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels  Masterdimmer:None / Global / RGB / System  DMX-FAIL:Hold / 0%-100%  8bit ModePWM-Frequency 488 Hz with LookUp-Table 2 kHz or 4 kHz without LookUp-Table  16bit ModePWM-Frequency 488 Hz without LookUp-Table  Output:9 PWM-signal common supply voltage anode (PLUS)  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V)  Energy-Save output:Control output for switching off the load power supply units  StandAlone function:9 internal StandAlone programs  Connections:Screw terminals  Dimensions:99mm x 82 mm Produkt DownloadsDMX-LED-Dimmer X9HRBedienungsanleitung DMX-LED-Dimmer X9HRUser Manual DMX-LED-Dimmer X9HRUSB Driver (ab V2.2)Version 6.0.0.0 DMX-LED-Dimmer X9HRFirmware (ab V2.2) Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

 DMX-LED-Dimmer X9HR+The DMX-LED-Dimmer X9HR+ is especially designed for controlling RGB LED-Stripes.The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9HR+ has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V).0% to 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9HR+ operates with supply voltages from 12V up to 24V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lost DMX signal thecurrent state (HOLD) or to adopt a predefined value if the DMX signal fails.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs) orone master dimmer per RGB group. The global master dimmer is fixed at DMX address 1 andcan be used as system master dimmer.Adjustable dimming curveThe dimming curves can be configured individually for each output.RDM supportThe DMX-LED-Dimmer X9HR+ allows configuration by RDM via DMX.SubDevice-ModeWithin the SubDevice Mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.Touch-ControlThe DMX-LED-Dimmer X9HR+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status displayVia a RGB status display the DMX reception is shown.Firmware-Update-FunctionTo use future functions, the DMX-LED-Dimmer X9HR+ offers a firmware update function. Specifications  Power supply:7-24V DC 100mA@12V / 150mA@24V (without load)  LED voltage:7-24V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling and LookUp-Table 18 channels with 16Bit-controlling + optional Master-Dimmer-Channels  Output:9 PWM-signal common supply voltage anode (PLUS)  8bit ModePWM-Frequency 488 Hz with LookUp-Table 2 kHz or 4 kHz without LookUp-Table  16bit ModePWM-Frequency 488 Hz without LookUp-Table  Masterdimmer:None / Global / RGB / System  DMX-FAIL:Hold / 0%-100%  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V)  CTRL output:Control output for switching off the load power supply units (Energy-Save)  StandAlone function:9 internal StandAlone programs  Display:7 segment display RGB LED  TOUCH-Control:3 touch buttons  Connectors:Screw terminals  Dimensions:105mm x 90mm x 60mm Produkt DownloadsDMX-LED-Dimmer X9 HR+Bedienungsanleitung DMX-LED-Dimmer X9 HR+User Manual DMX-LED-Dimmer X9 HR+USB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9 HR+Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

 DMX-LED-Dimmer X9HRXThe DMX LED Dimmer X9HRX is a 9-channel LED driver with 16-bit grayscale adaptive pulse density modulation (APDM)and a high output frequency of up to 8kHz at the same time.Thanks to the special APDM technology in combination with the optimized 48V LED drivers,the DMX LED dimmer X9HRX is perfectly suited for controlling RGB, RGBW or even single-color W stripes.9 OutputsThe DMX-LED-Dimmer X9HRX has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A. So it is possible to connect a maximum loadof 120W (12V) / 240W (24V) / 240W (48V).High efficiencyThe 48V LED drivers are designed to allow the DMX LED Dimmer X9HRXto operate without active cooling (no fan).0% up to 100% dimmableThe connected LEDs are dimmed by APDM from 0% to 100%.For voltages from 12V up to 48VThe DMX-LED-Dimmer X9HRX operates with supply voltages from 12V up to 48V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HRX can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of loss DMX signalthe current state (HOLD) or predefined a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB/RGBW group.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 500Hz and 8000Hz via RDM.Adjustable Dimming CurveThe dimming curves can be configured individually for each output.RDM SupportThe DMX-LED-Dimmer X9HRX allows configuration by RDM via DMX.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.RGB-Status-DisplayThe device status is shown via the RGB status display.Firmware-Update-FunctionIn order to be able to use future functions, the DMX-LED-Dimmer X9HRX offersa firmware update function both via USB and RDM.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HRXand therefore ideally suited for switch cabinet installation. Specifications  Power supply:12-48V DC 80mA@12V / 100mA@24V (without load)  LED voltage:12-48V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling and Curve-Definition 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels  DMX-FAIL:Hold / 0%-100%  Output:9 PWM-signal with 16Bit-resolution and APDM (Adaptive Pulse Density Modulation) common supply voltage  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V) / 9x 240W (48V)  Masterdimmer:None / Global / RGB / RGBW  PWM frequency:500Hz / 1kHz / 2kHz / 4kHz / 8kHz  CTRL Output:Control output for switching off the load power supply units (Energy-Save)  StandAlone function:9 internal Stand-Alone programs  Display:RGB LED  Connections:Screw terminals  Dimensions:99mm x 82mm Produkt DownloadsDMX-LED-Dimmer X9HRXBedienungsanleitung DMX-LED-Dimmer X9HRXUser Manual DMX-LED-Dimmer X9HRXUSB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9HRXFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

 DMX-LED-Dimmer X9HRX+The DMX LED Dimmer X9HRX+ is a 9-channel LED driver with 16-bit grayscale adaptive pulse density modulation (APDM)and a high output frequency of up to 8kHz at the same time.Thanks to the special APDM technology in combination with the optimized 48V LED drivers,the DMX LED dimmer X9HRX+ is perfectly suited for controlling RGB, RGBW or even single-color W stripes.9 OutputsThe DMX-LED-Dimmer X9HRX+ has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A. So it is possible to connect a maximum loadof 120W (12V) / 240W (24V) / 240W (48V).High efficiencyThe 48V LED drivers are designed to allow the DMX LED Dimmer X9HRX+to operate without active cooling (no fan).0% up to 100% dimmableThe connected LEDs are dimmed by APDM from 0% to 100%.For voltages from 12V up to 48VThe DMX-LED-Dimmer X9HRX+ operates with supply voltages from 12V up to 48V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HRX+ can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of loss DMX signalthe current state (HOLD) or predefined a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB/RGBW group.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 500Hz and 8000Hz via RDM.Adjustable Dimming CurveThe dimming curves can be configured individually for each output.RDM SupportThe DMX-LED-Dimmer X9HRX+ allows configuration by RDM via DMX.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.Touch-ControlThe DMX-LED-Dimmer X9HRX+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status-DisplayThe device status is shown via the RGB status display.Firmware-Update-FunctionIn order to be able to use future functions, the DMX-LED-Dimmer X9HRX+ offersa firmware update function both via USB and RDM. Specifications  Power supply:12-48V DC 80mA@12V / 100mA@24V (without load)  LED voltage:12-48V DC (no AC voltage !)  Protocol:DMX512 RDM  DMX channels:9 channels with 8Bit-controlling and Curve-Definition 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels  DMX-FAIL:Hold / 0%-100%  Output:9 PWM-signal with 16Bit-resolution and APDM (Adaptive Pulse Density Modulation) common supply voltage  Output current:max. 10A each output In sum 90A with all GND connections  Output power:9x 120W (12V) / 9x 240W (24V) / 9x 240W (48V)  Masterdimmer:None / Global / RGB / RGBW  PWM frequency:500Hz / 1kHz / 2kHz / 4kHz / 8kHz  CTRL Output:Control output for switching off the load power supply units (Energy-Save)  StandAlone function:9 internal Stand-Alone programs  Display:7 segment display RGB LED  Connections:Screw terminals  Dimensions:105mm x 90mm x 60mm Produkt DownloadsDMX-LED-Dimmer X9HRX+Bedienungsanleitung DMX-LED-Dimmer X9HRX+User Manual DMX-LED-Dimmer X9HRX+USB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9HRX+Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual