SK6812 RGBW Digital LEDThe SK6812RGBW-LED is a RGBW-LED with internal control electronic. To control these LED a serial datasignal is needed.To control the WS2812B the following devices can be used:- ArtNet Multi PixxControl- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Color:RGBW (5500-6000K)  Controller typ:SK6812 (compatible with WS2811 / APA-104)  Resolution:8 bit for each color red/green/blue/white  Design:RGBW LED with internal electronics  Dimension:5 x 5 mm (SMD 5050) Product DownloadsSK6812 RGBW Digital LEDDatasheet

 NeoPixel SK6812 RGBW 1/4 60 RingWith four of these you can make a huge ring with 60 ultra bright smart LED NeoPixelsare arranged in a circle with a 6.2" diameter. Each order comes with just the quarter ring.Four of this item are required to make a large ring. You will have to solder them together as well,so for the full ring of 60 LEDs, buy four and solder them together! Also, you'll need to give thesemechanical backing, the solder joints are only for electrical signal, not strong enough to hold it together.The rings are 'chainable' - connect the output pin of one to the input pin of another.Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constantcurrent drive so the color will be very consistent even if the voltage varies, and no externalchoke resistors are required making the design slim. Power the whole thing with 5VDC and you're ready to rock.Comes with one quarter ring of 15x individually addressable RGB LEDs assembled and tested.We recommend you buy four to build the full circle as this is just the 1/4 of the circle.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Pixelanzahl:15  Brightness levels:256 for each color  Distance between LEDs:10mm  Input:3 solder joints  Output:3 solder joints  Outer diameter of the whole ring (four together):15,8cm / 6.2"  Inner diameter of the whole ring (four together):14,3cm / 5,625"

 LED-Ring SK6812 RGBW 8The LED ring SK6812 RGBW 8 has an outer diameter of 32mm and consists of 8 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:8  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:32mm  Inner diameter:24mm

 LED-Ring SK6812 RGBW 32The LED ring SK6812 RGBW 32 has an outer diameter of 112mm and consists of 32 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:32  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:112mm  Inner diameter:104mm

 LED-Ring SK6812 RGBW 48The LED ring SK6812 RGBW 48 has an outer diameter of 152mm and consists of 48 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:48  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:152mm  Inner diameter:144mm

 LED-Ring SK6812 RGBW 60The LED ring SK6812 RGBW 60 has an outer diameter of 172mm and consists of 60 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:60  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:172mm  Inner diameter:164mm

 LED-Matrix SK6812 RGBW 10x10The LED-Matrix SK6812 RGBW 10x10 has in total 100 LEDs (Pixel) arranged in a 10x10 grid.Each LED consists of one red, green, blue and white LED including an internal controlling.So an individual control of each single LED is possible.The representation of symbols and letters is feasible by appropriate control.A pixel pitch of 10mm results in a LED-Matrix size of 100mm x 100mm.Several LED-Matrix elements can be put together easily.Between the elements there is again a pixel distance of 10mm.The arrangement of the LEDs is always the same orientation.Please be patient by installation and take care of the orientation,also between several LED-Matrix elements. Technische Daten  Power supply:5V  Power consumption:max. 0,4W per LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Number of pixel:100 (10x10)  Brightness steps:256 per color  Distance between LEDs:10mm  Input:3pin solder connection RM2,54  Output:3pin solder connection RM2,54  Voltage connection:Soldering pads  Dimensions:100mm x 100mm Produkt DownloadsLED-Matrix SK6812 RGBW 10x10Bedienungsanleitung LED-Matrix SK6812 RGBW 10x10User Manual

 Digital LED-Stripe RGB SK6812 30WSThe digital LED-Stripe has 150 single controllable RGB-LED's (pixel) by a length of 5m (30 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 150 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 9 W/m  LED Typ:SMD5050 RGB  Number of Pixel:150 pices (30 Pixel/m)  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB SK6812 30BLThe digital LED-Stripe has 150 single controllable RGB-LED's (pixel) by a length of 5m (30 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 150 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in black- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 9 W/m  LED Typ:SMD5050 RGB  Number of Pixel:150 pices (30 Pixel/m)  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:black / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB SK6812 144WSThe digital LED-Stripe has 144 single controllable RGB-LED's (pixel) by a length of 1m (144 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 144 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812(B)/APA104 Specifications  Voltage:5V DC  Power:max. 43,2 W/m  LED Typ:SMD5050 RGB  Number of Pixel:144 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA104 compatible)  Length / Wide:1m / 12mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB SK6812 60BLThe digital LED-Stripe has 300 single controllable RGB-LED's (pixel) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in black- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:black / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB SK6812 60WSThe digital LED-Stripe has 300 single controllable RGB-LED's (pixel) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe KALTWEIß SK6812 60WSThe digital LED-Stripe has 300 single controllable LED's (pixel) by a length of 5m (60 Pixel/m).Due to the usage of cold lighting LEDs there is no RGB-colour mixing neccessary which allows a brilliant white.- easy separable between each LED - assembled with 300 intelligent COOLWHITE SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050  Color temperature:8000K - 10000K  Number of LEDs:300  Brightness values:3x256 per LED  LED view angle:120°  LED-Controller:SK6812 (with WS2811 / APA104 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGBW SK6812 60WSThe digital LED-Stripe has 300 single controllable RGBW-LED's (4-in-1 pixel with red, green,blue,pure-white) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGBW-SMD-LEDs (4-in-1)- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W / m  LED Typ:SMD5050 RGBW 4-in-1 (PURE-WHITE)  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe WWA SK6812 60WSThe digital LED-Stripe has 300 single controllable LED's (pixel) with WHITE/WARMWHITE/AMBER in one chip.- easy separable between each LED - assembled with 300 intelligent SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812 Specifications  Voltage:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 PURE-WHITE/WARM-WHITE/AMBER  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK2812 (with WS2811/WS2812 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGBWW SK6812 60WSThe digital LED-Stripe has 300 single controllable RGBWW-LED's (4-in-1 pixel with red,green,blue,warm-white) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGBWW-SMD-LEDs (4-in-1)- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W / m  LED Typ:SMD5050 RGBWW 4-in-1 (WARM-WHITE)  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female