Hicon HI-X3CM-BSoldering-male connector, HICON XLR, 5-pol , metal-,silver plated contacts, straight, black Specifications  Manufactor:HICON  Part number:HI-X3CM-B  Color:black  Model:XLR male  Pole number:3  Material:Metal / cap plastic  Type of contact:Soldering  Mounting:Cable  Cable diameter min.:4mm  Cable diameter max.:8,5mm

 ULN2803AThe ULN2803A and ULN2804A each contain eight Darlington transistors with common emitters and integral suppression diodes for inductive loads. Each Darlington features a peak load current rating of 600 mA (500 mA continuous) and can withstand at least 50 V in the OFF state. Specifications  Factory number:ULN2803A  Manufacturer:ST  Housing:DIP-18

 Anschlussklemme 36Colour coded four-core connecting cable for RGB LED lighting applications.Ribbon cable for easy installation of RGB LED technology such LED Stripes RGB and more.1 x 0,5mm² (white) / 3 x 0,34mm² (red;green;blue)This line is used on the low-voltage side (max. 24V) of the supply of LED technology.Supplied as a section (in meter). Specifications  Execution:1 x 0,5mm² (white) / 3 x 0,34mm² (red;green;blue)  Item:1 meter as a section (meter) max. 25m We deliver the ordered RGB+W LED cable straight.  Color coding sequence:Red , Green, Blue , White  

 RJ45 Netzwerkkabel 5m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications  Specification:CAT 5e  Connector:RJ45 male (8P8C), both sides  Kink protection:both sides  Length:5m  Color:black

 Hicon HI-X3DM-GSoldering-male connector, HICON XLR, 3-pol , metal-,gold plated contacts, black Specifications  Manufactor:HICON  Part number:HI-X3DM-G  Color:black  Model:XLR male  Pole number:3  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Neutrik NC3MXX3 pole male cable connector with Nickel housing and silver contacts.The next generation of the worldwide accepted standard of XLR cable connectors. The successor of the X series offers several new features which make it more reliable, easier to assemble and improves contact integrity as well cable strain relief. Specifications  Manufactor:NEUTRIK  Part number:NC3MXX  Model:XLR male  Pole number:3  Mounting:Cable  

 Hicon HI-X3DF-GSoldering-female connector, HICON XLR, 3-pol , metal-,gold plated contacts, black Specifications  Manufactor:HICON  Part number:HI-X3DF-G  Color:black  Model:XLR female  Pole number:3  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Netzwerkkabel 10m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications  Specification:CAT 5e  Connector:RJ45 male (8P8C), both sides  Kink protection:both sides  Length:10m  Color:black

 RJ45 Verbinder CAT6RJ45 Modular Coupler, CAT 62x RJ45 female (8P8C)- RJ45 coupling for extension and connection of 2x network cables with RJ45 plugs- With real metal housing/cover (instead of metalised plastic)- Ethernet coupler with robust metal housing and shroud jacket for durability- 1:1 assignment for CAT 6 network cable- RJ45 sockets are suitable for PoE+ nach IEEE 802.3 at- CAT 6 jacks with PCB board for a perfect transmission of electrical or optical signals

 Hicon HI-X5DF-GSoldering-female connector, HICON XLR, 5-pol , metal-,gold plated contacts, black Specifications  Manufactor:HICON  Part number:HI-X5DF-G  Color:black  Model:XLR female  Pole number:5  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Hicon HI-X4CM-GSoldering-male connector, HICON XLR, 4-pol , metal-,gold plated contacts, straight, black Specifications  Manufactor:HICON  Part number:HI-X4CM-G  Color:black  Model:XLR female  Pole number:4  Material:Metal / cap plastic  Type of contact:Soldering  Mounting:Cable  Cable diameter min.:4mm  Cable diameter max.:8,5mm

 Kaltgeräteanschlusskabel 1,8mCold devices power cord.Compatible with: - Power supply 5V / 6A- Power supply 12V / 5A Specifications  Cable cross-section:H03VV 3x 0,75 mm²  Design:With plug with earthing contact  Length:ca. 1,8m  Load limit:6A

 Hicon HI-X4CF-GSoldering-female connector, HICON XLR, 4-pol , metal-,gold plated contacts, straight, black Specifications  Manufactor:HICON  Part number:HI-X4CF-G  Color:black  Model:XLR female  Pole number:4  Material:Metal / cap plastic  Type of contact:Soldering  Mounting:Cable  Cable diameter min.:4mm  Cable diameter max.:8,5mm

 Adam Hall DMX-Kabel 1,5m XLR3Adam Hall - DMX-Cable (K3DMF0150)Highly flexible 110 Ohm data cable according to the DMX specification, provided with three-pin XLR connectors. Specifications  Product type:Cable Assembled  Typ:110 Ohm DMX & AES/EBU-Cable  Cable length:1,5 m  Color:black  Cable diameter:5,8 mm  Inner conductor cross-section:0,22 mm²  Capacity:<90 pF/m  Connection 1:XLR male 3pol  Connection 2:XLR female 3pol  Brand:Adam Hall

 DC-Netzteil-Verlängerung 3mDC extension cable with a length of 3m and 1x DC FEMALE (2,1mm/5,5mm) and 1x DC MALE (2,1mm/5,5mm/9,5mm) connector.To use with: - DC-Y-Cable- Power supply 5V/6A- Power supply 12V / 5A- Digital LED-Stripes Specifications  Cable:2x 0,4 mm²  Connection:1x DC male to 1x DC female  Length:~ 3m  max. load:5A / 12V

 LSA Auflegewerkzeug - LogiLinkIdeal suitable for on-wall and in-wall wallplates.Cutting of the extending cable end in one step and easy network wiring.- LSA Punch Down Tool- Suitable for on-wall and in-wall wallplates- Cutting of the extending cable end in one step- According to the standard EIA/TIA 568 B- For Network, DSL and ISDN- Easy to use- With self-tapping contacts

 Hicon HI-X5DM-GSoldering-male connector, HICON XLR, 5-pol , metal-,gold plated contacts, black Specifications  Manufactor:HICON  Part number:HI-X5DM-G  Color:black  Model:XLR male  Pole number:5  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Neutrik NC3FD-L-13 pole female receptacle, solder cups, Nickel housing, silver contactsUniversal D-size metal body XLR panel mount series. UL recognized component.Robust "D" metal shellStandardized D sized 24 mm panel cutout Specifications  Manufactor:NEUTRIK  Part number:NC3FD-L-1  Color:silver  Model:XLR female  Pole number:3  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Neutrik NC3MD-L-13 pole male receptacle, solder cups, Nickel housing, silver contactsUniversal D-size metal body XLR panel mount series. UL recognized component.Robust "D" metal shellStandardized D sized 24 mm panel cutout Specifications  Manufactor:NEUTRIK  Part number:NC3MD-L-1  Color:silver  Model:XLR male  Pole number:3  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Neutrik NC5MX5 pole male cable connector with Nickel housing and silver contacts.The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. Specifications  Manufactor:NEUTRIK  Part number:NC5MX  Model:XLR male  Pole number:5  Mounting:Cable  

 USB-Stick MICRO 4GBUSB-Stick MICRO 4GBThe Micro Line combines power and minimalist design in a single USB stick.With transfer rates of 16.5 MB/s for reading and 6.5 MB/s for writing,large amounts of data can be saved on the stick in minimum time.Its compact format also allows you to leave the stick permanently in the computer. Specifications  Capacitie:4 GB  Color:Black  Material:Plastic  Interface:High Speed USB 2.0  Max. reading:16,50 MB/s  Max. writing:6,50 MB/s

 Neutrik NE8MC-1Cable connector carrier consists of a shell, fixing disk, chuck and boot. The boot (same as XLR X-Series) is suitable for cable diameters from 3.5 - 8 mm. For non pre-assembled cables only. Cable connector carrier does not include a RJ45 plug.The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.Attention! Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B. Specifications  Manufactor:NEUTRIK  Title:NE8MC-1  Type:Male

 Neutrik NC5FX5 pole female cable connector with Nickel housing and silver contacts.The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. Specifications  Manufactor:NEUTRIK  Part number:NC5FX  Model:XLR female  Pole number:5  Mounting:Cable  

 Neutrik NC5MD-L-15 pole male receptacle, solder cups, Nickel housing, silver contactsUniversal D-size metal body XLR panel mount series. UL recognized component.Robust "D" metal shellStandardized D sized 24 mm panel cutout Specifications  Manufactor:NEUTRIK  Part number:NC5MD-L-1  Color:silver  Model:XLR male  Pole number:5  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Hicon HI-X3X5-MFHICON Adapter | XLR 3-pin male/XLR 5-pin female, blackTo use with: - ArtNet-DMX STAGE-PROFI 1.1- ArtNet-DMX UNIVERSE 4.1- NanoDMX USB-Interface Specifications  Manufactor:HICON  Title:HI-X3X5-MF  Connection Type:Adapter

 Hicon HI-X3X3-MMHICON Adapter | XLR 3-pin male, blackTo use with:- ArtNet-DMX STAGE-PROFI 1.1 (using DMX-INPUT mode) Specifications  Manufactor:HICON  Title:HI-X3X3-MM  Connection Type:Adapter

 Hicon HI-X3X5-FMHICON Adapter | XLR 3-pin female/XLR 5-pin male, blackTo use with:- NanoPixx DMX-Controller Specifications  Manufactor:HICON  Title:HI-X3X5-FM  Connection Type:Adapter

 Adam Hall DMX-Kabel 6m XLR3Adam Hall - DMX-Cable (K3DMF0600)Highly flexible 110 Ohm data cable according to the DMX specification, provided with three-pin XLR connectors. Specifications  Product type:Cable Assembled  Typ:110 Ohm DMX & AES/EBU-Cable  Cable length:6 m  Color:black  Cable diameter:5,8 mm  Inner conductor cross-section:0,22 mm²  Capacity:<90 pF/m  Connection 1:XLR male 3pol  Connection 2:XLR female 3pol  Brand:Adam Hall

 Hutschienengehäuse 350 flatModule housing for M36-DIN-standard rail. Specifications  Top Material:LexanColour:grey (RAL 7035)Max. Temperature:100°CInstallation wide:35.0 mm (2 Module)Label dimensions:60.0 x 30.0 mmFlammability:in confomity with UL94-VO  Base Material:norylColour:black (RAL 7021)Max. Temperaturr:100°CTerminal:max. 5Montage:DIN-standard rail (EN50022)Flammability:in conformity with UL94-VO Product DownloadsModule enclosure 350 flatDimensional drawing

 NEMA 17 HalterungNEMA 17 mount for stepper motors

 MEANWELL NLDD-350H Konstantstrom LED-TreiberLED driver from the NLDD-H series:- Enlosed design- Constant current output- Wide input voltage range (10...56V)- Efficiency up to 96%- Remote Function and Dimmable- Protections: short circuit and overtemperature- Suitable for controlling LED lighting- Safety standards: IEC 61547- EMC standards: EN 55015- Suitable for controlling LED lighting The minimum output voltage of the NLDD series is 6V! Note that the LED forward voltage is greater than/equal to 6V!  Specifications  Input voltage:10-56V DC  Output voltage:6-52 V DC  Output current:350mA +-5%  Dimension:32,1mm x 20,5mm x 12,24mm Produkt DownloadsMEANWELL NLDD LED-TreiberDatasheet

 MEANWELL NLDD-500H Konstantstrom LED-TreiberLED driver from the NLDD-H series:- Enlosed design- Constant current output- Wide input voltage range (10...56V)- Efficiency up to 96%- Remote Function and Dimmable- Protections: short circuit and overtemperature- Suitable for controlling LED lighting- Safety standards: IEC 61547- EMC standards: EN 55015- Suitable for controlling LED lighting The minimum output voltage of the NLDD series is 6V! Note that the LED forward voltage is greater than/equal to 6V!  Specifications  Input voltage:10-56V DC  Output voltage:6-52 V DC  Output current:500mA +-5%  Dimension:32,1mm x 20,5mm x 12,24mm Produkt DownloadsMEANWELL NLDD LED-TreiberDatasheet

 MEANWELL NLDD-700H Konstantstrom LED-TreiberLED driver from the NLDD-H series:- Enlosed design- Constant current output- Wide input voltage range (10...56V)- Efficiency up to 96%- Remote Function and Dimmable- Protections: short circuit and overtemperature- Suitable for controlling LED lighting- Safety standards: IEC 61547- EMC standards: EN 55015- Suitable for controlling LED lighting The minimum output voltage of the NLDD series is 6V! Note that the LED forward voltage is greater than/equal to 6V!  Specifications  Input voltage:10-56V DC  Output voltage:6-52 V DC  Output current:700mA +-5%  Dimension:32,1mm x 20,5mm x 12,24mm Produkt DownloadsMEANWELL NLDD LED-TreiberDatasheet

 MEANWELL NLDD-1050H Konstantstrom LED-TreiberLED driver from the NLDD-H series:- Enlosed design- Constant current output- Wide input voltage range (10...56V)- Efficiency up to 96%- Remote Function and Dimmable- Protections: short circuit and overtemperature- Suitable for controlling LED lighting- Safety standards: IEC 61547- EMC standards: EN 55015- Suitable for controlling LED lighting The minimum output voltage of the NLDD series is 6V! Note that the LED forward voltage is greater than/equal to 6V!  Specifications  Input voltage:10-56V DC  Output voltage:6-52 V DC  Output current:1050mA +-5%  Dimension:32,1mm x 20,5mm x 12,24mm Produkt DownloadsMEANWELL NLDD LED-TreiberDatasheet

 MEANWELL NLDD-1200H Konstantstrom LED-Treiber LED driver from the NLDD-H series: - Enlosed design- Constant current output- Wide input voltage range (10...56V)- Efficiency up to 96%- Remote Function and Dimmable- Protections: short circuit and overtemperature- Suitable for controlling LED lighting- Safety standards: IEC 61547- EMC standards: EN 55015- Suitable for controlling LED lighting The minimum output voltage of the NLDD series is 6V! Note that the LED forward voltage is greater than/equal to 6V!  Specifications     Input voltage: 10-56V DC     Output voltage: 6-46 V DC     Output current: 1200mA +-5%     Dimension: 32,1mm x 20,5mm x 12,24mm 　　  Produkt Downloads MEANWELL NLDD LED-Treiber Datasheet

 MEANWELL NLDD-1400H Konstantstrom LED-TreiberLED driver from the NLDD-H series:- Enlosed design- Constant current output- Wide input voltage range (10...56V)- Efficiency up to 96%- Remote Function and Dimmable- Protections: short circuit and overtemperature- Suitable for controlling LED lighting- Safety standards: IEC 61547- EMC standards: EN 55015- Suitable for controlling LED lighting The minimum output voltage of the NLDD series is 6V! Note that the LED forward voltage is greater than/equal to 6V!  Specifications  Input voltage:10-56V DC  Output voltage:6-46 V DC  Output current:1400mA +-5%  Dimension:32,1mm x 20,5mm x 12,24mm Produkt DownloadsMEANWELL NLDD LED-TreiberDatasheet

 Hutschienengehäuse 350Module housing for M36-DIN-standard rail. Specifications  Top Material:LexanColour:grey (RAL 7035)Max. Temperature:100°CInstallation wide:35.0 mm (2 Module)Label dimensions:41.0 x 30.0 mmFlammability:in confomity with UL94-VO  Base Material:norylColour:black (RAL 7021)Max. Temperaturr:100°CTerminal:max. 5Montage:DIN-standard rail (EN50022)Flammability:in conformity with UL94-VO Product DownloadsModule enclosure 350Datasheet

 MicroSDHC-Speicherkarte 4GB4GB MicroSDHC memory cardMultiple rewritable memory card for all devices with MicroSD card slot.

 SDHC-Speicherkarte 4GB4GB SDHC memory cardMultiple rewritable memory card for all devices with SD card slot.Various manufacturers

XLR-Kabel 10m 3polMicrophone and symmetric connecting cable- 2 cores shielded SCHULZ Kabel MK 6- Braided shield- Outside diameter 6 mm, 2 x 0,12 mm²- 1 XLR-plug to 1 XLR-jack- Length: 10 m Specifications  Length:10m  Manufactor:DMX4ALL  Cable:SCHULZ Kabel MK 6  Connector:SCHULZ  Type:XLR 3-pol female / XLR 3-pol male

 Neutrik NC5FD-L-15 pole female receptacle, solder cups, Nickel housing, silver contactsUniversal D-size metal body XLR panel mount series. UL recognized component.Robust "D" metal shellStandardized D sized 24 mm panel cutout Specifications  Manufactor:NEUTRIK  Part number:NC5FD-L-1  Color:silver  Model:XLR female  Pole number:5  Material:Metal  Type of contact:Soldering  Mounting:Mounting  

 Hutschienengehäuse 700Module housing for M36-DIN-standard rail. Specifications  Top Material:LexanColour:grey (RAL 7035)Max. Temperature:100°CInstallation wide:70.0 mm (4 Module)Label dimensions:41.0 x 65.0 mmFlammability:in confomity with UL94-VO  Base Material:norylColour:black (RAL 7021)Max. Temperaturr:100°CTerminal:max. 24Montage:DIN-standard rail (EN50022)Flammability:in conformity with UL94-VO Product DownloadsModule enclosure 700Maßzeichnung

 DIY-Board 350Mit dem DIY-Board 350 können eigene Schaltungen wie z.B. Sicherungsplatinen realisiert werden.Das DIY-Board dient als universelle Leiterplatte und kann nachBelieben mit Komponenten und Verbindungen bestückt werden.Die Löcher der Lochrasterfläche sind im RM2,54 das bedeutet im 2,54mm Raster angeordnet.Um Kabel mit den auf dem Board verbauten Komponenten zu verbinden,können bei Bedarf die beiliegenden Schraubklemmen in die dafür vorgesehenen Bohrungeneingelötet werden (ober- bzw. unterhalb der X1-X10 Beschriftung am Leiterkartenrad).Die beschrifteten Kontakte X1-X10 sind dann mit den danebenliegenden Schraubklemm-Kontakten verbunden.Die Größe des Boards erlaubt die Montage in einem Hutschienengehäuse 350oder Hutschienengehäuse 350 flat (als Zubehör erhältlich). Technische Daten  Abmessungen:82mm x 29,2mm  Leiterkartendicke:1,6mm  Leiterkartenfarbe:Schwarz  Kupferdicke:35um  Material:FR-4  Rastermaß:RM 2,54 (2,54mm)  Lochdurchmesser:1mm  Ausführung:Punktraster, zweiseitig, durchkontaktiert und bleifrei Produkt DownloadsDIY-Board 350BedienungsanleitungDIY-Board 350User Manual

XLR-Kabel 15m 3polMicrophone and symmetric connecting cable- 2 cores shielded SCHULZ Kabel MK 6- Braided shield- Outside diameter 6 mm, 2 x 0,12 mm²- 1 XLR-plug to 1 XLR-jack- Length: 15 m Specifications  Length:15m  Manufactor:DMX4ALL  Cable:SCHULZ Kabel MK 6  Connector:SCHULZ  Type:XLR 3-pol female / XLR 3-pol male

 Installations-Gehäuse 94x94x57 Spelsberg TK PS 99-6-mThe TK - PS series has a high protection rating of IP 66, can be sealed as standard and is available with smooth side walls or with metric knockouts. No subsequent drilling or milling is required - simply knock out the knockouts with a screwdriver and install the screw connections. The material is very easy to work with for individual openings in smooth side walls. The housings are scratch-resistant. They are characterized by a high level of flexibility, e.g. through the range of accessories and the many fastening options inside the box, the adapted standard rails and the mounting plates. The lids are available in either gray or transparent. The wall fastening options in the box base and below the lid screws round off the wide range of possible uses. Specifications  Specifications:With pre-stamping 7x M16/20  Material:Polystyrol (EPS)  Length:94 mm  Width:94 mm  Hight:57 mm

 5 Port Ethernet SwitchThe ideal device to built net work distribution:Up to 5 devices can be connected with the switch via a patch cable.- IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) Standard105380- Full-duplex or half-duplex operation with self identification for 10BASE-T and 100BASE-TX connection- Automatic for: Address learning, aging of addressings and address migration- Store-and-Forward tranferring mode- IEEE 802.3x flow control- Back Pressure flow control- Self-test when turn on with LED display - LED-Display for an easy network service - Protection against network overload Depending on availability different products will be delivered.By changing manufacturers technical changes will be possible!  Specifications  Connections:5x RJ45 LAN 10/100 (Fast Ethernet)  Power supply:5,5V / 500mA extern (included in scope of delivery)  Standards:IEEE 802.3 / IEEE 802.3u  Display:Status LEDs   Features:changing manufacturers

 LED-Treiber LDD-350HLED driver from the LDD-H series:- Step-down DC/DC converter- Constant current output- Wide input voltage range- Built-in EMI filter (in accordance with EN55015 and FCC Part 15)- Integrated PWM and remote ON/OFF controller- Protected against: short circuit and over-temperature- Compact design (IP67)- Casting material: epoxy (UL94-V0)- Suitable for controlling LED lighting Specifications  Input voltage:9-56V DC  Output voltage:2-52 V DC  Output current:300mA  Dimension:31,8 x 20,3 x 12,2 mm Produkt DownloadsMEANWELL LDD LED-TreiberDatasheet

 LED-Treiber LDD-500HLED driver from the LDD-H series:- Step-down DC/DC converter- Constant current output- Wide input voltage range- Built-in EMI filter (in accordance with EN55015 and FCC Part 15)- Integrated PWM and remote ON/OFF controller- Protected against: short circuit and over-temperature- Compact design (IP67)- Casting material: epoxy (UL94-V0)- Suitable for controlling LED lighting Specifications  Input voltage:9-56V DC  Output voltage:2-52 V DC  Output current:500mA  Dimension:31,8 x 20,3 x 12,2 mm Produkt DownloadsMEANWELL LDD LED-TreiberDatasheet

 LED-Treiber LDD-600HLED driver from the LDD-H series:- Step-down DC/DC converter- Constant current output- Wide input voltage range- Built-in EMI filter (in accordance with EN55015 and FCC Part 15)- Integrated PWM and remote ON/OFF controller- Protected against: short circuit and over-temperature- Compact design (IP67)- Casting material: epoxy (UL94-V0)- Suitable for controlling LED lighting Specifications  Input voltage:9-56V DC  Output voltage:2-52 V DC  Output current:600mA  Dimension:31,8 x 20,3 x 12,2 mm Produkt DownloadsMEANWELL LDD LED-TreiberDatasheet

 LED-Treiber LDD-700HLED driver from the LDD-H series:- Step-down DC/DC converter- Constant current output- Wide input voltage range- Built-in EMI filter (in accordance with EN55015 and FCC Part 15)- Integrated PWM and remote ON/OFF controller- Protected against: short circuit and over-temperature- Compact design (IP67)- Casting material: epoxy (UL94-V0)- Suitable for controlling LED lighting Specifications  Input voltage:9-56V DC  Output voltage:2-52 V DC  Output current:700mA  Dimension:31,8 x 20,3 x 12,2 mm Produkt DownloadsMEANWELL LDD LED-TreiberDatasheet

 LED-Treiber LDD-1000HLED driver from the LDD-H series:- Step-down DC/DC converter- Constant current output- Wide input voltage range- Built-in EMI filter (in accordance with EN55015 and FCC Part 15)- Integrated PWM and remote ON/OFF controller- Protected against: short circuit and over-temperature- Compact design (IP67)- Casting material: epoxy (UL94-V0)- Suitable for controlling LED lighting Specifications  Input voltage:9-56V DC  Output voltage:2-52 V DC  Output current:1000mA  Dimension:31,8 x 20,3 x 12,2 mm Produkt DownloadsMEANWELL LDD LED-TreiberDatasheet

 LED-Treiber LDD-1200HLED driver from the LDD-H series:- Step-down DC/DC converter- Constant current output- Wide input voltage range- Built-in EMI filter (in accordance with EN55015 and FCC Part 15)- Integrated PWM and remote ON/OFF controller- Protected against: short circuit and over-temperature- Compact design (IP67)- Casting material: epoxy (UL94-V0)- Suitable for controlling LED lighting Specifications  Input voltage:9-56V DC  Output voltage:2-36 V DC  Output current:1200mA  Dimension:31,8 x 20,3 x 12,2 mm Produkt DownloadsMEANWELL LDD LED-TreiberDatasheet

 LED-Treiber LDD-1500HLED driver from the LDD-H series:- Step-down DC/DC converter- Constant current output- Wide input voltage range- Built-in EMI filter (in accordance with EN55015 and FCC Part 15)- Integrated PWM and remote ON/OFF controller- Protected against: short circuit and over-temperature- Compact design (IP67)- Casting material: epoxy (UL94-V0)- Suitable for controlling LED lighting Specifications  Input voltage:9-56V DC  Output voltage:2-36 V DC  Output current:1500mA  Dimension:31,8 x 20,3 x 12,2 mm Produkt DownloadsMEANWELL LDD LED-TreiberDatasheet

 Adam Hall DMX-Kabel 10m XLR3Adam Hall - DMX-Cable (K3DMF1000)Highly flexible 110 Ohm data cable according to the DMX specification, provided with three-pin XLR connectors. Specifications  Product type:Cable Assembled  Typ:110 Ohm DMX & AES/EBU-Cable  Cable length:10 m  Color:black  Cable diameter:5,8 mm  Inner conductor cross-section:0,22 mm²  Capacity:<90 pF/m  Connection 1:XLR male 3pol  Connection 2:XLR female 3pol  Brand:Adam Hall

 Neutrik NA3MM3 pole XLR male - 3 pole XLR male (gender conversion adapter) Features & Benefits- Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems- Professional look and compact space saving design, based on the XX Series- Rugged diecast shell for best reliabilityTo use with: - ArtNet-DMX STAGE-PROFI 1.1 (using DMX-INPUT mode) Specifications  Manufactor:NEUTRIK  Title:NA3MM  Connection Type:Adapter

 DIY-Board 700The DIY-Board 700 can be used to realize your own circuits for example as fuse boards.The DIY board is a universal circuit board and can be equipped with components and connections as needed.The holes of the breadboard are arranged in RM2.54, which means in 2.54mm grid.To connect cables with the components installed on the board, the enclosed screw terminalscan be soldered into the holes provided if required (above or below the X1-X24 labeling on the PCB wheel).The labeled contacts X1-X24 are connected to the screw terminal contacts next to them.The size of the board allows mounting in a top-hat rail housing 700 (available as accessories). Specifications  Dimensions:82mm x 64,2mm  Circuit board thickness:1,6mm  Circuit board color:Black  Copper thickness:35um  Material:FR-4  Grid dimension:RM 2,54 (2,54mm)  Hole diameter:1mm  Design:Dot matrix, double-sided, connected through and lead-free Product DownloadsDIY-Board 700Bedienungsanleitung DIY-Board 700User Manual

 Hutschienengehäuse 1050Module housing for M36-DIN-standard rail. Specifications  Top Material:LexanColour:grey (RAL 7035)Max. Temperature:100°CInstallation wide:105.0 mm (6 module)Label dimensions:41.0 x 100.0 mmFlammability:in confomity with UL94-VO  Base Material:norylColour:black (RAL 7021)Max. Temperaturr:100°CTerminal:max. 36Montage:DIN-standard rail (EN50022)Flammability:in conformity with UL94-VO Product DownloadsModule enclosure 1050Maßzeichnung

 DIY-Board 1050The DIY-Board 1050 can be used to realize your own circuits for example as fuse boards.The DIY board is a universal circuit board and can be equipped with components and connections as needed.The holes of the breadboard are arranged in RM2.54, which means in 2.54mm grid.To connect cables with the components installed on the board, the enclosed screw terminalscan be soldered into the holes provided if required (above or below the X1-X36 labeling on the PCB wheel).The labeled contacts X1-X36 are connected to the screw terminal contacts next to them.The size of the board allows mounting in a top-hat rail housing 1050 (available as accessories). Specifications  Dimensions:82mm x 99mm  Circuit board thickness:1,6mm  Circuit board color:Black  Copper thickness:35um  Material:FR-4  Grid dimension:RM 2,54 (2,54mm)  Hole diameter:1mm  Design:Dot matrix, double-sided, connected through and lead-free Product DownloadsDIY-Board 1050Bedienungsanleitung DIY-Board 1050User Manual

HICON SGHN-0100-SW XLR-Kabel 1m 3polSommer Cable SGHN-0100-SWThe Stage 22 Highflex is a high-quality, very reasonably priced cable with awire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket.It is filled with PVC almost all the way to the core and allows for excellent reeling.We supply it with HICON HI-X3CM or HI-X3CF XLR connectors, with a 6-fold strain relief.- Outside diameter 6,4 mm, 2x 0,12 mm²- 1 XLR-plug 3pin to 1 XLR-jack 3pin- Length: 1 m Specifications  Length:1m  Manufactor:Sommer cable  Partnumber:SGHN-0100-SW  Name:Stage 22 Highflex  Inner conductor:2x 0,22 mm²  Connector:HICON  Type:XLR 3-pol female / XLR 3-pol male

 HAMMOND 1455C801Aluminum housing 1455C801 Specifications  Manufacturer:Hammond  Manufacturer part number:1455C801  Dimension (LxWxH):80 mm x 54 mm x 23 mm  Material:Aluminium  Color:Clear (Anodize) Produkt DownloadsDatasheetUser Manual

 Neutrik NA3F5M3 pole XLR female - 5 pole XLR male for lighting (DMX) applicationsFeatures & Benefits- Compact XLR 3 to 5 pole adapter for lighting (DMX) applications- Solve interconnection problems of the 3-pole and 5-pole DMX standard- Professional look and compact space saving design, based on the XX Series- Rugged diecast shell for best reliabilityTo use with: - NanoPixx DMX-Controller Specifications  Manufactor:NEUTRIK  Title:NA3F5M  Connection Type:Adapter

HICON SGHN-0500-SW XLR-Kabel 5m 3polSommer Cable SGHN-0500-SWThe Stage 22 Highflex is a high-quality, very reasonably priced cable with awire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket.It is filled with PVC almost all the way to the core and allows for excellent reeling.We supply it with HICON HI-X3CM or HI-X3CF XLR connectors, with a 6-fold strain relief.- Outside diameter 6,4 mm, 2x 0,12 mm²- 1 XLR-plug 3pin to 1 XLR-jack 3pin- Length: 5 m Specifications  Length:5m  Manufactor:Sommer cable  Partnumber:SGHN-0500-SW  Name:Stage 22 Highflex  Inner conductor:2x 0,22 mm²  Connector:HICON  Type:XLR 3-pol female / XLR 3-pol male

 HAMMOND 1455CF801Aluminum housing 1455CF801 Specifications  Manufacturer:Hammond  Manufacturer part number:1455CF801  Dimension (LxWxH):80 mm x 74 mm x 23 mm  Material:Aluminium  Color:Clear (Anodize) Produkt DownloadsDatasheetUser Manual

 Neutrik NA3M5F3 pole XLR male - 5 pole XLR female for lighting (DMX) applicationsFeatures & Benefits- Compact XLR 3 to 5 pole adapter for lighting (DMX) applications- Solve interconnection problems of the 3-pole and 5-pole DMX standard- Professional look and compact space saving design, based on the XX Series- Rugged diecast shell for best reliabilityTo use with: - ArtNet-DMX STAGE-PROFI 1.1- ArtNet-DMX UNIVERSE 4.1- NanoDMX USB-Interface[TAB:Specifications] Specifications  Manufactor:NEUTRIK  Title:NA3M5F  Connection Type:Adapter