SK6812 RGBW Digital LEDThe SK6812RGBW-LED is a RGBW-LED with internal control electronic. To control these LED a serial datasignal is needed.To control the WS2812B the following devices can be used:- ArtNet Multi PixxControl- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Color:RGBW (5500-6000K)  Controller typ:SK6812 (compatible with WS2811 / APA-104)  Resolution:8 bit for each color red/green/blue/white  Design:RGBW LED with internal electronics  Dimension:5 x 5 mm (SMD 5050) Product DownloadsSK6812 RGBW Digital LEDDatasheet

 SK9822 RGB Digital LEDThe SK9822-LED is a RGB-LED with internal control electronic. To control these LED a serial datasignal is needed.To control the WS2812B the following devices can be used:- ArtNet Multi PixxControl- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Color:RGB  Controller typ:SK9822 (compatible with APA-102)  Resolution:8 bit for color red/green/blue 5 bit for master brightness  Design:RGB LED with internal electronics  Dimension:5 x 5 mm (SMD 5050) Product DownloadsSK9822 RGB Digital LEDDatasheet

 WS2812B RGB Digital LEDThe WS2812B-LED is a RGB-LED with internal control electronic. To control these LED a serial datasignal is needed.To control the WS2812B the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Color:16,7 million (RGB each 8 Bit)  Intensity:390-470mcd (RED) 660-720mcd (GREEN) 180-200mcd (BLUE)  Design:RGB LED with internal electronics  Dimension:5 x 5 mm (SMD 5050) Product DownloadsWS2812B RGB Digital LEDDatasheet

 WS2811 5VDC 8mmThese LEDs have an internal chips to control their brightness and color. You can place many LEDs in a long daisychain and send them serial communication to individually control each LED.To control this device the following devices can be used:- ArtNet Multi PixxControl- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Color:RGB  Controller typ:WS2811  Resolution:8 bit for each color red/green/blue  Design:8mm RGB LED with internal electronics Product DownloadsWS2811 5VDC 8mmDatasheet

 JST-Stecker 3 mit AnschlusskabelConnection cable for use with our digital LED Stripes with 3-pin connector.Compatible with: - Digital LED-Stripe SK6812- Digital LED-Stripe APA104- Digital LED-Stripe WS2811- Digital LED-Stripe WS2812- Digital LED-Stripe INK1003- Digital LED-Stripe RGB TM1804- Digital LED-Stripe RGB UCS9812- Digital LED-Stab RGB WS2811 Specifications  Implementation:JST SM  Connection:3 pin male connector  Length:~ 25cm

 JST-Buchse 3 mit AnschlusskabelConnection cable for use with our digital LED Stripes with 3-pin connector.Compatible with: - Digital LED-Stripe SK6812- Digital LED-Stripe APA104- Digital LED-Stripe WS2811- Digital LED-Stripe WS2812- Digital LED-Stripe INK1003- Digital LED-Stripe RGB TM1804- Digital LED-Stripe RGB UCS9812- Digital LED-Stab RGB WS2811 Specifications  Implementation:JST SM  Connection:3 pin female connector  Length:~ 25cm

 JST-Stecker 4 mit AnschlusskabelConnection cable for use with our digital LED Stripes with 4-pin connector orwith our analog RGB LED stripes.Compatible with: - Digital LED-Stripe SK9822- Digital LED-Stripe LPD8806 Specifications  Implementation:JST SM  Connection:4 pin male connector  Length:~ 25cm

 JST-Buchse 4 mit AnschlusskabelConnection cable for use with our digital LED Stripes with 4-pin connector orwith our analog RGB LED stripes.Compatible with: - Digital LED-Stripe SK9822- Digital LED-Stripe LPD8806 Specifications  Implementation:JST SM  Connection:4 pin female connector  Length:~ 25cm

 LED-Ring SK6812 RGBW 8The LED ring SK6812 RGBW 8 has an outer diameter of 32mm and consists of 8 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:8  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:32mm  Inner diameter:24mm

 NeoPixel SK6812 RGBW 1/4 60 RingWith four of these you can make a huge ring with 60 ultra bright smart LED NeoPixelsare arranged in a circle with a 6.2" diameter. Each order comes with just the quarter ring.Four of this item are required to make a large ring. You will have to solder them together as well,so for the full ring of 60 LEDs, buy four and solder them together! Also, you'll need to give thesemechanical backing, the solder joints are only for electrical signal, not strong enough to hold it together.The rings are 'chainable' - connect the output pin of one to the input pin of another.Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constantcurrent drive so the color will be very consistent even if the voltage varies, and no externalchoke resistors are required making the design slim. Power the whole thing with 5VDC and you're ready to rock.Comes with one quarter ring of 15x individually addressable RGB LEDs assembled and tested.We recommend you buy four to build the full circle as this is just the 1/4 of the circle.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Pixelanzahl:15  Brightness levels:256 for each color  Distance between LEDs:10mm  Input:3 solder joints  Output:3 solder joints  Outer diameter of the whole ring (four together):15,8cm / 6.2"  Inner diameter of the whole ring (four together):14,3cm / 5,625"

 Digital LED Tube RGB WS2811LED-Stab mit 16 einzeln ansteuerbaren LED-Pixeln und 360° Abstrahlung.Je Pixel sind 2 LEDs vorhanden, insgesamt 32 LEDs (5050) pro Stab.Für die Befestigung ist eine Metallöse vorhanden.Einfacher Anschluss durch 3poligen Steckeranschluß und 2 Litzen für die Spannungsversorgung.Mehrere Stäbe müssen in einer Linie hintereinandergeschaltet werden.Die Spannung muss nach jedem 2. Stab neu zugeführt werden. Technische Daten  Spannungsversorgung:5V  Leistungsaufnahme:max. 9,6W pro Stab  LED:32x 5050 RGB  LED Controller:WS2811 oder WS2812(B)  Pixelanzahl:16  Helligkeitsstufen:256 je Farbe  Ausführung:IP54  Betriebstemperatur:0 – 45°C  Länge:0,5m  Durchmesser:18mm Produkt DownloadsDigital LED Tube RGB WS2811Bedienungsanleitung

 PixxRangeExtender 5VThe PixxRangeExtender 5V is an optimal tool to receive control signals for digital LED stripes with long signal cables.The signal lines (clock and data) are converted to an interference-insensitive signal,so that increases the range of the signal transmission.For this purpose, the PixxRangeExtender 5V only requires a receiver at the end of the signal line. Specifications  Power supply:5V from digital LED stripe  Connection:3 solder pads for signal input 4 solder pads for connection to LED stripe  Dimensions:23mm x 12mm Product DownloadsPixxRangeExtender 5VBedienungsanleitung PixxRangeExtender 5VUser Manual

 PixxRangeExtender 12VThe PixxRangeExtender 12V is an optimal tool to receive control signals for digital LED stripes with long signal cables.The signal line(s) are converted to an interference-insensitive signal,so that increases the range of the signal transmission.For this purpose, the PixxRangeExtender 12V only requires a receiver at the end of the signal line. Specifications  Power supply:12V from digital LED stripe  Output signal:5V control signal  Connection:3 solder pads for signal input 4 solder pads for connection to LED stripe  Dimensions:29mm x 12mm Product DownloadsPixxRangeExtender 12VBedienungsanleitung PixxRangeExtender 12VUser Manual

 LED-Ring SK6812 RGBW 32The LED ring SK6812 RGBW 32 has an outer diameter of 112mm and consists of 32 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:32  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:112mm  Inner diameter:104mm

 LED-Ring SK6812 RGBW 48The LED ring SK6812 RGBW 48 has an outer diameter of 152mm and consists of 48 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:48  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:152mm  Inner diameter:144mm

 Digital LED-Stripe RGB TM1804!!! Discontinued - while stocks last !!!The LED-Stripe TM1804 has 80 single controllable LED's (Pixel) by a length of 2,5m.There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED- assembled with 80 RGB SMD-LEDs and 80 TM1804 Controller- self-adhesive backside - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Power supply:5V DC  max. Power:9,6 W/m  LED Typ:SMD5050 RGB  Number of Pixel:80 pices  Pixel-Pitch:19,23 mm  Brightness values:256 per colour  Angle of radiation:per LED ca. 120°  LED-Controller:TM 1804  Length / Wide:2,5m / 12mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 LED-Ring SK6812 RGBW 60The LED ring SK6812 RGBW 60 has an outer diameter of 172mm and consists of 60 individually controllable RGBW LEDs.Each LED consists of a red, green, blue and white LED with internal control.Thus, an individual control of each individual LED is possible.The rings are 'chainable' - connect the output pin of one to the input pin of another ring.To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  Leistungsaufnahme:max. 0,4W pro LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Nr. of LEDs:60  Brightness levels:256 for each color  Connection:4 solder joints (5V / GND / DATA IN / DATA OUT)  Outer diameter:172mm  Inner diameter:164mm

 Digital LED-Stripe KALTWEIß APA-104 30The digital LED-Stripe has 150 single controllable LED's (pixel) by a length of 5m (30 Pixel/m).Due to the usage of cold lighting LEDs there is no RGB-colour mixing neccessary which allows a brilliant white.- easy separable between each LED - assembled with 150 intelligent COOLWHITE SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Spannungsversorgung:5V DC  Power:max. 9 W/m  LED Typ:SMD5050 COOLWHITE  Number of Pixel:150 pices  Brightness values:3x256 per LED  LED view angle:120°  LED-Controller:APA-104 (with WS2811 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe WARMWEIß APA-104 30The digital LED-Stripe has 150 single controllable LED's (pixel) by a length of 5m (30 Pixel/m).Due to the usage of cold lighting LEDs there is no RGB-colour mixing neccessary which allows a brilliant white.- easy separable between each LED - assembled with 150 intelligent WARMWHITE SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Spannungsversorgung:5V DC  Power:max. 9 W/m  LED Typ:SMD5050 WARMWHITE  Number of Pixel:150 pices  Brightness values:3x256 per LED  LED view angle:120°  LED-Controller:APA-104 (with WS2811 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB APA102 24BLThe digital LED-Stripe has 72 single controllable RGB-LED's (pixel) by a length of 3m (24 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 72 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in black- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Spannungsversorgung:5V DC  Power:max. 7,2 W/m  LED Typ:SMD5050 RGB  Number of Pixel:72 pices (24 Pixel/m)  Brightness values:256 per colour  LED view angle:120°  LED-Controller:APA102  Length / Wide:3m / 12mm  Carrier material:black / self-adhesive backside  Connectors:Input: JST-SM3 female / DC-Connector Output: JST-SM3 male

 MiniPixx 3.5 RDMThe MiniPixx 3.5 RDM is the smallest DMX controller for digital LED stripes, which is available in different versions.The individual pixels of the digital LED strip can be controlled in the simplest way via DMX.Different versionsThe MiniPixx RDM is available in 3 different versions. Depending on the LED stripe,a version 3.5 / 4.5 (5V) or 4.12 (12V) is available.170 RGB-, 128 RGBW- or 512 single color pixelBy controlling via DMX, 170 pixels (RGB), 128 pixels (RGBW) or512 pixels (single color) can be controlled individually.RDM SupportThe MiniPixx RDM allows an RDM supported configuration via DMX.Pixel-SequencerWith the pixel sequencer different effects can be generated.Only a few DMX channels are necessary to customize the settings for the effects.Small DesignDue to the small size of only 12mm x 25mm, the MiniPixx RDM can be mounted directly at the beginning of the LED stripe.Selectable LED-ChipThe LED chip used in the connected digital LED strip can be selected. This allows the use with various digital LED stripes.Settable Color ReplayThe color sequence for RGB as well as RGBW LED stripes is adjustable for universal use.SingleColor-OptionVia a DMX universe up to 512 pixels can be controlled in single color.For this, the SingleColor Option must be selected, in which each pixel needs only one channel.Settable Pixel GroupThe MiniPixx RDM supports pixel groups with an adjustable length. Each pixel group behaves like a singlepixel that is controlled via 3 DMX channels (for RGB). This way channels can be saved in longer installations.br>  Specifications  Power supply:5V / 50mA from the connected digital LED stripe  Protocol:DMX512 RDM  Output Protocol:RGB(LED type)APA-104max. 512 Pixel GS8208max. 512 Pixel INK1002 / INK1003max. 512 Pixel LC8808(B)max. 512 Pixel LPD1886 - 8Bitmax. 512 Pixel LPD1886 12Bit (8Bit controlled)max. 341 Pixel LPD1886 12Bit (12Bit controlled)max. 341 Pixel SK6812 / SK6822max. 512 Pixel TLS3008 8Bitmax. 558 Pixel TM1804 / TM1812 / TM1829max. 512 Pixel UCS1903 / UCS1912max. 512 Pixel UCS2903 / UCS2912max. 512 Pixel UCS9812 (8Bit controlled)max. 292 Pixel UCS9812 (16Bit controlled)max. 292 Pixel WS2811 / WS2812(B) / WS2813 / WS2815 / WS2818max. 512 Pixel   RGBW SK6812max. 384 Pixel TM1814max. 382 Pixel UCS2912max. 384 Pixel    Color sequence:RGB (adjustable) SingleColor red, green, blue, white RGBW with UCS2912, SK6812, TM1814  Pixel groups:1 - 127  Max. number of pixel:170 Pixel (RGB) 128 Pixel (RGBW) 512 Pixel (Single Color)  Dimensions:12mm x 25mm Product DownloadsMiniPixx RDMBedienungsanleitung MiniPixx RDMUser Manual

 MiniPixx 4.5 RDMThe MiniPixx 4.5 RDM is the smallest DMX controller for digital LED stripes, which is available in different versions.The individual pixels of the digital LED strip can be controlled in the simplest way via DMX.Different versionsThe MiniPixx RDM is available in 3 different versions. Depending on the LED stripe,a version 3.5 / 4.5 (5V) or 4.12 (12V) is available.170 RGB-, 128 RGBW- or 512 single color pixelBy controlling via DMX, 170 pixels (RGB), 128 pixels (RGBW) or512 pixels (single color) can be controlled individually.RDM SupportThe MiniPixx RDM allows an RDM supported configuration via DMX.Pixel-SequencerWith the pixel sequencer different effects can be generated.Only a few DMX channels are necessary to customize the settings for the effects.Small DesignDue to the small size of only 12mm x 25mm, the MiniPixx RDM can be mounted directly at the beginning of the LED stripe.Selectable LED-ChipThe LED chip used in the connected digital LED strip can be selected. This allows the use with various digital LED stripes.Settable Color ReplayThe color sequence for RGB as well as RGBW LED stripes is adjustable for universal use.SingleColor-OptionVia a DMX universe up to 512 pixels can be controlled in single color.For this, the SingleColor Option must be selected, in which each pixel needs only one channel.Settable Pixel GroupThe MiniPixx RDM supports pixel groups with an adjustable length. Each pixel group behaves like a singlepixel that is controlled via 3 DMX channels (for RGB). This way channels can be saved in longer installations.br>  Specifications  Power supply:5V / 50mA from the connected digital LED stripe  Protocol:DMX512 RDM  Output Protocol:RGB(LED type)APA-101max. 3071 Pixel APA-102max. 1534 Pixel APA-104max. 512 Pixel DycoLED PB3max. 3071 Pixel DycoLED PC5max. 192 Pixel GS8208max. 512 Pixel INK1002 / INK1003max. 512 Pixel LC8808(B)max. 512 Pixel LPD1101 / LPD6803max. 3071 Pixel LPD1886 - 8Bitmax. 512 Pixel LPD1886 12Bit (8Bit controlled)max. 341 Pixel LPD1886 12Bit (12Bit controlled)max. 341 Pixel LPD8806max. 2047 Pixel MagiarLED III flexmax. 1534 Pixel SK6812 / SK6822max. 512 Pixel SK9822max. 1534 Pixel TLS3008 8Bitmax. 558 Pixel TM1804 / TM1812 / TM1829max. 512 Pixel UCS1903 / UCS1912max. 512 Pixel UCS2903 / UCS2912max. 512 Pixel UCS9812 (8Bit controlled)max. 292 Pixel UCS9812 (16Bit controlled)max. 292 Pixel WS2801max. 2048 Pixel WS2811 / WS2812(B) / WS2813 / WS2815 / WS2818max. 512 Pixel   RGBW SK6812max. 384 Pixel TM1814max. 382 Pixel UCS2912max. 384 Pixel    Color sequence:RGB (adjustable) SingleColor red, green, blue, white RGBW with UCS2912, SK6812, TM1814  Pixel groups:1 - 127  Max. number of pixel:170 Pixel (RGB) 128 Pixel (RGBW) 512 Pixel (Single Color)  Dimensions:12mm x 25mm Product DownloadsMiniPixx RDMBedienungsanleitung MiniPixx RDMUser Manual

 LED-Matrix SK6812 RGBW 10x10The LED-Matrix SK6812 RGBW 10x10 has in total 100 LEDs (Pixel) arranged in a 10x10 grid.Each LED consists of one red, green, blue and white LED including an internal controlling.So an individual control of each single LED is possible.The representation of symbols and letters is feasible by appropriate control.A pixel pitch of 10mm results in a LED-Matrix size of 100mm x 100mm.Several LED-Matrix elements can be put together easily.Between the elements there is again a pixel distance of 10mm.The arrangement of the LEDs is always the same orientation.Please be patient by installation and take care of the orientation,also between several LED-Matrix elements. Technische Daten  Power supply:5V  Power consumption:max. 0,4W per LED  LED:5050 4in1 RGBW (5500-6000K)  LED Controller:SK6812  Number of pixel:100 (10x10)  Brightness steps:256 per color  Distance between LEDs:10mm  Input:3pin solder connection RM2,54  Output:3pin solder connection RM2,54  Voltage connection:Soldering pads  Dimensions:100mm x 100mm Produkt DownloadsLED-Matrix SK6812 RGBW 10x10Bedienungsanleitung LED-Matrix SK6812 RGBW 10x10User Manual

 MiniPixx 4.12 RDMThe MiniPixx 4.12 RDM is the smallest DMX controller for digital LED stripes, which is available in different versions.The individual pixels of the digital LED strip can be controlled in the simplest way via DMX.Different versionsThe MiniPixx RDM is available in 3 different versions. Depending on the LED stripe,a version 3.5 / 4.5 (5V) or 4.12 (12V) is available.170 RGB-, 128 RGBW- or 512 single color pixelBy controlling via DMX, 170 pixels (RGB), 128 pixels (RGBW) or512 pixels (single color) can be controlled individually.RDM SupportThe MiniPixx RDM allows an RDM supported configuration via DMX.Pixel-SequencerWith the pixel sequencer different effects can be generated.Only a few DMX channels are necessary to customize the settings for the effects.Small DesignDue to the small size of only 12mm x 25mm, the MiniPixx RDM can be mounted directly at the beginning of the LED stripe.Selectable LED-ChipThe LED chip used in the connected digital LED strip can be selected. This allows the use with various digital LED stripes.Settable Color ReplayThe color sequence for RGB as well as RGBW LED stripes is adjustable for universal use.SingleColor-OptionVia a DMX universe up to 512 pixels can be controlled in single color.For this, the SingleColor Option must be selected, in which each pixel needs only one channel.Settable Pixel GroupThe MiniPixx RDM supports pixel groups with an adjustable length. Each pixel group behaves like a singlepixel that is controlled via 3 DMX channels (for RGB). This way channels can be saved in longer installations.br>  Specifications  Power supply:12V / 50mA from the connected digital LED stripe  Protocol:DMX512 RDM  Output Protocol:RGB(LED type)APA-101max. 3071 Pixel APA-102max. 1534 Pixel APA-104max. 512 Pixel DycoLED PB3max. 3071 Pixel DycoLED PC5max. 192 Pixel GS8208max. 512 Pixel INK1002 / INK1003max. 512 Pixel LC8808(B)max. 512 Pixel LPD1101 / LPD6803max. 3071 Pixel LPD1886 - 8Bitmax. 512 Pixel LPD1886 12Bit (8Bit controlled)max. 341 Pixel LPD1886 12Bit (12Bit controlled)max. 341 Pixel LPD8806max. 2047 Pixel MagiarLED III flexmax. 1534 Pixel SK6812 / SK6822max. 512 Pixel SK9822max. 1534 Pixel TLS3008 8Bitmax. 558 Pixel TM1804 / TM1812 / TM1829max. 512 Pixel UCS1903 / UCS1912max. 512 Pixel UCS2903 / UCS2912max. 512 Pixel UCS9812 (8Bit controlled)max. 292 Pixel UCS9812 (16Bit controlled)max. 292 Pixel WS2801max. 2048 Pixel WS2811 / WS2812(B) / WS2813 / WS2815 / WS2818max. 512 Pixel   RGBW SK6812max. 384 Pixel TM1814max. 382 Pixel UCS2912max. 384 Pixel    Color sequence:RGB (adjustable) SingleColor red, green, blue, white RGBW with UCS2912, SK6812, TM1814  Pixel groups:1 - 127  Max. number of pixel:170 Pixel (RGB) 128 Pixel (RGBW) 512 Pixel (Single Color)  Dimensions:12mm x 25mm Product DownloadsMiniPixx RDMBedienungsanleitung MiniPixx RDMUser Manual

 Digital LED-Stripe RGB SK6812 30WSThe digital LED-Stripe has 150 single controllable RGB-LED's (pixel) by a length of 5m (30 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 150 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 9 W/m  LED Typ:SMD5050 RGB  Number of Pixel:150 pices (30 Pixel/m)  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB SK6812 30BLThe digital LED-Stripe has 150 single controllable RGB-LED's (pixel) by a length of 5m (30 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 150 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in black- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 9 W/m  LED Typ:SMD5050 RGB  Number of Pixel:150 pices (30 Pixel/m)  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:black / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe WARMWEIß APA-104 60The digital LED-Stripe has 300 single controllable LED's (pixel) by a length of 5m (60 Pixel/m).Due to the usage of cold lighting LEDs there is no RGB-colour mixing neccessary which allows a brilliant white.- easy separable between each LED - assembled with 300 intelligent WARMWHITE SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 WARMWHITE  Number of Pixel:300 pices  Brightness values:3x256 per LED  LED view angle:120°  LED-Controller:APA-104 (with WS2811 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB LC8808B 144WSThis new digital LED strip combines individual control of each LED (pixel) and operation at 12V.This reduces the total current and the installation has been simplified.Running lights up to a rainbow effect are possible.- easy separable between each LED- assembled with 144 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - control via our controller for digital LEDs- compatible with WS2811/WS2812 protocolTo control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Voltage:12V DC  Power:max. 34,5 W/m  LED Typ:SMD5050 RGB  Number of Pixel:144 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:LC8808B (protocoll compatible with WS2811/WS2812/APA-104/SK6812)  Length / Wide:1m / 12mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM4 male / DC-Connector Output: JST-SM4 female

 Digital LED-Stripe RGB SK6812 144WSThe digital LED-Stripe has 144 single controllable RGB-LED's (pixel) by a length of 1m (144 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 144 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812(B)/APA104 Specifications  Voltage:5V DC  Power:max. 43,2 W/m  LED Typ:SMD5050 RGB  Number of Pixel:144 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA104 compatible)  Length / Wide:1m / 12mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 RGB HUB75 MatrixPanel P7.62 16x32The RGB HUB75 MatrixPanel P7.62 16x32 is a standard HUB75 matrix panelwith 16x32 pixels with a pixel pitch of 7.62mm.Each LED consists of a red, green and blue LED.This enables individual RGB control of each individual LED.The HUB75 MatrixPanels can be strung together.However, the maximum number of pixels must be observed by the HUB75 controller.The control can e.g. with these devices:HUB75E Dot-Matrix Control Specifications  Power supply:5V DC  Pixel count, height:16  Pixel count, width:32  Scan-Rate:1/8  RGB-Groups (Data Lines):1 (3)  Pixel pitch:7,62mm  Medium Power:400 W/m²  LED:512x RGB (3in1)  Connection:HUB75 + POWER  Dimensions:122mm x 244mm  Delivery includes:1x RGB HUB75 MatrixPanel P7,62 16x32 1x HUB75 data cable 1x Power cable 1x Quick guide german / english Product DownloadsRGB HUB75 MatrixPanel P7.62 16x32Bedienungsanleitung RGB HUB75 MatrixPanel P7.62 16x32User Manual

 Digital LED-Stripe RGB LPD1886The LED-Stripe LPD1886 has 210 single controllable LED's (Pixel) by a length of 5m (42 Pixel/m).This digital LED-Stripe offers a 36Bit colour resolution (12Bit per colour R/G/B) and is able to represent 68,71 million colours! There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each each LED- assembled with 210 RGB SMD5050-LEDs with LPD1886 LED-Controller- 68,71million colours- self-adhesive backsideTo control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  max. Power:12,6 W/m  Number of Pixels:210  Pixel-Pitch:23,81 mm  LED-Type:SMD5050 - RGB  Brightness value:4096 per colour  Angle of radiation:per LED ca. 120°  LED-Controller:LPD1886 with 12Bit resolution  Length / Width:5m / 14mm

 Digital LED-Stripe RGB LPD8806!!! Discontinued - while stocks last !!!The LED-Stripe LPD8806 has 260 single controllable LED's (Pixel) by a length of 5m (52 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting!- easy separable between every 2 LEDs- assembled with 260 RGB LEDs - self-adhesive backside- divided connection for power supply and data line To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  max. Power:15,6 W/m  LED Typ:260x RGB  Number of Pixel:260  Pixel-Pitch:19,23 mm  Brightness values:256 per colour  Angle of radiation:per LED ca. 120°  LED-Controller:LPD8806  Length / Wide:5m / 16mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM4 female / DC-Connector Output: JST-SM4 male

 RGB HUB75 MatrixPanel P7.62 32x32The RGB HUB75 MatrixPanel P7.62 32x32 is a standard HUB75 matrix panelwith 32x32 pixels with a pixel pitch of 7.62mm.Each LED consists of a red, green and blue LED.This enables individual RGB control of each individual LED.The HUB75 MatrixPanels can be strung together.However, the maximum number of pixels must be observed by the HUB75 controller.The control can e.g. with these devices:HUB75E Dot-Matrix Control Specifications  Power supply:5V DC  Pixel count, height:32  Pixel count, width:32  Scan-Rate:1/16  RGB-Groups (Data Lines):2 (6)  Pixel pitch:7,62mm  Medium Power:400 W/m²  LED:1024x RGB (3in1)  Connection:HUB75 + POWER  Dimensions:244mm x 244mm  Delivery includes:1x RGB HUB75 MatrixPanel P7,62 32x32 1x HUB75 data cable 1x Power cable 1x Quick guide german / english Product DownloadsRGB HUB75 MatrixPanel P7.62 32x32Bedienungsanleitung RGB HUB75 MatrixPanel P7.62 32x32User Manual

 Digital LED-Stripe RGB SK6812 60BLThe digital LED-Stripe has 300 single controllable RGB-LED's (pixel) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in black- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:black / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGB SK6812 60WSThe digital LED-Stripe has 300 single controllable RGB-LED's (pixel) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812/APA-104 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812/APA-104 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 DMX PixxControl DRThe DMX PixxControl DR is especially designed for controlling digital LED-Stripes orPixel-Stripes via DMX.By controlling via DMX 170 Pixel (RGB) / 128 Pixel (RGBW) / 512 Pixel (single color) canbe controlled individually.Selectable LED-ChipThe used LED-Chip within the connected digital LED-Stripe is selectable.So, the usage with several digital LED-Stripes is possible.Adjustable color reproductionThe RGB-Color sequence is adjustable, allowing an universal application.SingleColor-OptionA SingleColor-Option is selectable in which each pixel occupies only one channel.So up to 512 pixel in one color can be controlled via one DMX-Universe.Adjustable pixel groupThe DMX PixxControl DR supports pixel groups with adjustable lengths.Each pixel group behaves like a single pixel which is controlled via3 DMX-Channels (for RGB). That economizes channels in longer installations.Easy ConfigurationAn easy configuration via RDM, USB via DMX-Configurator or DMX allowsthe setting of all parameters.Pixel-SequencerThe Pixel-Sequencer generates several effects.The settings can be made with only a few DMX channelsto fit the effects individually.RDM SupportThe DMX PixxControl DR allows configuration via RDM over DMX.TPM2-ProtocolThe DMX PixxControl DR also supports the TPM2 protocolvia the USB-Interface via Virtual Com Port (VCP).Firmware-Update-FunctionTo use future functions the DMX PixxControl DR offers a Firmware-Update-Function.Top-hat rail housing availableThe top-hat rail housing 350 or 350flat is available as accessory for the DMX PixxControl DR. Specifications  Power supply:5 - 12V DC / 300mA@5V; 150mA@12V or via USB-Connection  Input:DMX512 RDM  Output:Digital control signal for up to 170 RGB-Pixel, single controlable 128 RGBW-Pixel, single controlable  Supported LED types:APA101, APA102, APA104 DycoLED PB3, DycoLED PC5 GS8208 INK1002, INK1003 LPD6803, LPD6806, LPD8803 LPD1886 8Bit, LPD1886 12Bit SK6812, SK6822, SK9822 TM1804, TM1812, TM1814, TM1829 UCS1903, UCS1912, UCS2912, UCS9812 WS2801, WS2811, WS2812(B), WS2813 WS2815, WS2818  Color sequence:RGB (adjustable) SingleColor white SingleColor red SingleColor green SingleColor blue RGBW with UCS2912, SK6812, TM1814  Pixel groups:adjustable  Max. Pixel count:RGB: 170 Pixel/Pixelgroups; RGBW: 128 Pixel/Pixelgroups SingleColor: 512 Pixel/Pixelgroups  Dimensions:29,2mm x 82mm Product DownloadsDMX PixxControl DRBedienungsanleitung DMX PixxControl DRUser Manual DMX PixxControl DRUSB Driver 32 & 64bit - Version 6.0.0.0 DMX PixxControl DRFirmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual

 NanoPixx DMX-ControllerThe NanoPixx DMX controller is the smallest DMX controller for digital LED stipes.By using DMX it is a very easy way to control the individual pixels of the digital LED stripe.Compatible with many LED controllerThe used LED chip inside the connected digital LED Stripe is selected.Thus, the use of various digital LED Stripes is possible, for example:WS2811, WS2812(B), TM1804, TM1812, TM1829, DycoLED, LPD6803, LPD1101, APA101, APA102, APA104, UCS2912, ...Adjustable color sequenceThe RGB color sequence is adjustable which allows universal usage.In addition, you can choose a single color option, in which each pixel has only one channel.Adjustable pixel groupThe NanoPixx DMX-Controller supports pixel groups with an adjustable length.Each pixel group behaves as a single pixel on the 3 DMX channels is controlled.Thus, in extended installations save channels.High quality and compact designThe electronics of the NanoPixx DMX controller is housed in a 3-pin XLR connector in metal version.This results in an extremely compact design.Easy ConfigurationTo configure the NanoPixx DMX controllers basic DMX signal with specific values is applied during power up. After recognizing the DMX values, the configuration is stored in the internal memory of NanoPixx DMX controller.  Specifications  Power supply:5V from the connected digital LED stripe  Connection:XLR 3 male for DMX JST-SM 4 male for digital LED stripe Adapter JST-SM 4 male to JST-SM 3 male included  Protocol:DMX512  LED types:APA-101max. 2048 Pixel APA-102max. 1024 Pixel APA-104max. 341 Pixel DycoLED PB3max. 2048 Pixel DycoLED PC5max. 557 Pixel INK1002 / INK1003max. 341 Pixel LPD1101 / LPD6803max. 2048 Pixel LPD1886 - 8Bitmax. 682 Pixel LPD1886 12Bit (8Bit controlled)max. 512 Pixel LPD1886 12Bit (12Bit controlled)max. 512 Pixel LPD8803max. 2047 Pixel MagiarLED III flexmax. 1024 Pixel SK6812max. 341 Pixel SK9822max. 1024 Pixel TM1804 / TM1812 / TM1829max. 341 Pixel UCS1903 / UCS1912max. 170 Pixel UCS2903 / UCS2912max. 170 Pixel UCS9812max. 195 Pixel UCS9812 (8Bit controlled)max. 195 Pixel UCS9812 (16Bit controlled)max. 195 Pixel WS2801max. 1366 Pixel WS2811 / WS2812(B)max. 341 Pixel   !!! 170 pixel can be controlled individual !!!  Color sequence:RGB adjustable / SingleColor red, green, blue, white  Pixel groups:adjustable, 1 - 127  Dimensions:Diameter: 19mm Length: ~25cm Length adapter: ~5cm  Delivery includes::NanoPixx DMX-Controller Adapter JST-SM 4 female to JST-SM 3 female User manual (German) Product DownloadsNanoPixx DMX-ControllerBedienungsanleitung NanoPixx DMX-ControllerUser Manual

 Digital LED-Stripe RGB SK9822 30BLThe digital LED-Stripe has 150 single controllable RGB-LED's (pixel) by a length of 5m (30 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 150 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in black- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with APA-102 Specifications  Spannungsversorgung:5V DC  Power:max. 9 W/m  LED Typ:SMD5050 RGB  Number of Pixel:150 pices (30 Pixel/m)  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK9822 (with APA-102 compatible)  Length / Wide:5m / 10mm  Carrier material:black / self-adhesive backside  Connectors:Input: JST-SM4 male / DC-Connector Output: JST-SM4 female

 Digital LED-Stripe WARMWEISS LPD1886The LED-Stripe LPD 1886 warmwhite has 210 single controllable LED's (Pixel) by a length of 5m (42 Pixel/m).This digital LED-Stripe occurs a 36Bit resolution (3x 12 Bit) and is able to represent 68719 million brightness values!Due to the usage of white lighting LEDs there is no RGB-colour mixing neccessary which generates a sense of well-being white. This stripe is optimal suitable for applications in living rooms in which a subtle optically accent is desired.- easy separable between each LED - assembled with 210 warmwhite SMD5050-LEDs and LPD1886 LED-Controller- 68719 million brightness values- self-adhesive backsideTo control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Power supply:5V DC  max. Power:12,6 W/m  Number of Pixels:210  Pixel-Pitch:23,81 mm  LED-Type:SMD5050 - 3 Chip warmwhite  Brightness values:4096  Angle of radiation:per LED ca. 120°  LED-Controller:LPD1886 with 3x 12Bit resolution  Lenght / Width:5m / 14mm

5m | 60 Pixel/m | 12VDC | 32W/m

 Digital LED-Stripe RGB UCS9812This new high-resolution digital LED Stripe with 16-bit resolution per color and offering 65536 levels of brightness!The LED stripe has on a length of 5m 280 individually controllable LEDs (pixels) which is 56Pixel/m. There are running lights, color moves or rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable after 4 LEDs- assembled with 280 RGB SMD5050-LEDs with UCS9812 LED-Controller- 65536 brightness leverl for each color- self-adhesive backside- Controlling via our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Power supply:5V DC  max. Power:16,8 W/m  LED Typ:SMD5050 RGB  Number of Pixel:280 pices  Pixel-Pitch:17,86 mm  Cutable:after 4 LEDs (7,2cm)  Brightness value:65536 per colour  Angle of radiation:per LED ca. 120°  LED-Controller:UCS9812 with 16Bit resolution  Length / Wide:5m / 14mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe KALTWEIß SK6812 60WSThe digital LED-Stripe has 300 single controllable LED's (pixel) by a length of 5m (60 Pixel/m).Due to the usage of cold lighting LEDs there is no RGB-colour mixing neccessary which allows a brilliant white.- easy separable between each LED - assembled with 300 intelligent COOLWHITE SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050  Color temperature:8000K - 10000K  Number of LEDs:300  Brightness values:3x256 per LED  LED view angle:120°  LED-Controller:SK6812 (with WS2811 / APA104 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGBW SK6812 60WSThe digital LED-Stripe has 300 single controllable RGBW-LED's (4-in-1 pixel with red, green,blue,pure-white) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGBW-SMD-LEDs (4-in-1)- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W / m  LED Typ:SMD5050 RGBW 4-in-1 (PURE-WHITE)  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe WWA SK6812 60WSThe digital LED-Stripe has 300 single controllable LED's (pixel) with WHITE/WARMWHITE/AMBER in one chip.- easy separable between each LED - assembled with 300 intelligent SMD-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812 Specifications  Voltage:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 PURE-WHITE/WARM-WHITE/AMBER  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK2812 (with WS2811/WS2812 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 Digital LED-Stripe RGBWW SK6812 60WSThe digital LED-Stripe has 300 single controllable RGBWW-LED's (4-in-1 pixel with red,green,blue,warm-white) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGBWW-SMD-LEDs (4-in-1)- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with WS2811/WS2812 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W / m  LED Typ:SMD5050 RGBWW 4-in-1 (WARM-WHITE)  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK6812 (with WS2811/WS2812 compatible)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM3 male / DC-Connector Output: JST-SM3 female

 RGB HUB75 MatrixPanel P3 64x64The RGB HUB75 MatrixPanel P3 64x64 is a standard HUB75 matrix panelwith 64x64 pixels with a pixel pitch of 3mm.Each LED consists of a red, green and blue LED.This enables individual RGB control of each individual LED.The HUB75 MatrixPanels can be strung together.However, the maximum number of pixels must be observed by the HUB75 controller.The control can e.g. with these devices:HUB75E Dot-Matrix Control Specifications  Power supply:5V DC  Pixel count, height:64  Pixel count, width:64  Scan-Rate:1/32  RGB-Groups (Data Lines):2 (6)  Pixel pitch:3mm  Medium Power:700 W/m²  LED:4096x RGB (3in1)  Connection:HUB75E + POWER  Dimensions:192mm x 192mm  Delivery includes:1x RGB HUB75 MatrixPanel P3 64x64 1x HUB75 data cable 1x Power cable 1x Quick guide german / english Product DownloadsRGB HUB75 MatrixPanel P3 64x64Bedienungsanleitung RGB HUB75 MatrixPanel P3 64x64User Manual

 Digital LED-Stripe RGB LC8808B 60WSThis new digital LED stripe combines a single control of each LED (pixel) and a 12V operation.This reduces the total power required, which simplifies installation.- easy separable between each LED, no led group- assembled with 300 intelligent 3in1 RGB-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data lineTo control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Spannungsversorgung:12V DC  Power:max. 14,4 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices (60 Pixel/m)  Brightness values:256 per colour  LED-Controller:LC8808B (protocoll compatible with WS2811/WS2812/APA-104/SK6812)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM4 male / DC-Connector Output: JST-SM4 female

 Digital LED-Stripe RGB GS8208 60WSThis new digital LED stripe combines a single control of each LED (pixel) and a 12V operation.This reduces the total power required, which simplifies installation.The integrated LED driver also offers a 12-bit gamma correction and a PWM frequency of 8kHz.- easy separable between each LED, no led group- assembled with 300 intelligent 3in1 RGB-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line To control the following devices can be used:- ArtNet PixxControl PX1- ArtNet PixxControl PX2- ArtNet PixxControl PX2+- ArtNet Multi PixxControl- DMX PixxControl DR- SD-Player 8 Specifications  Spannungsversorgung:12V DC  Power:max. 14,4 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices (60 Pixel/m)  Brightness values:256 per colour  LED-Controller:GS8208 (protocoll compatible with WS2811/WS2812/APA-104/SK6812)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM4 male / DC-Connector Output: JST-SM4 female

 Digital LED-Stripe RGB SK9822 60BLThe digital LED-Stripe has 300 single controllable RGB-LED's (pixel) by a length of 5m (60 Pixel/m).There are running lights up to rainbow effects possible. Easy to install and perfect as striking decoration lighting! - easy separable between each LED - assembled with 300 intelligent RGB-SMD-LEDs- self-adhesive backside- LED-Stripe carrier in black- divided connection for power supply and data line - controlling e.g. with our ArtNet Multi PixxControl / MultiPixx DMX-Controller / NanoPixx DMX-Controller / NanoSD Player- compatible with APA-102 Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices  Brightness values:256 per colour  LED view angle:120°  LED-Controller:SK9822 (with APA-102 compatible)  Length / Wide:5m / 12mm  Carrier material:black / self-adhesive backside  Connectors:Input: JST-SM4 male / DC-Connector Output: JST-SM4 female

 Digital LED-Stripe RGB WS2813 60WSThis new digital LED stripe combines a single control of each LED (pixel) andan additional failure protection through a double data line.Our digital LED stripes are ideal for pixel applications. Each LED can be controlled individuallywith the DMX4ALL ArtNet Multi PixxControl, DMX4ALL DMX MultiPixx Control or the DMX4ALL NanoSD Player.- easy separable between each LED, no led group- assembled with 300 intelligent 3in1 RGB-LEDs- self-adhesive backside- LED-Stripe carrier in white- divided connection for power supply and data line Specifications  Spannungsversorgung:5V DC  Power:max. 18 W/m  LED Typ:SMD5050 RGB  Number of Pixel:300 pices (60 Pixel/m)  Brightness values:256 per colour  LED-Controller:SK6822 (protocoll compatible with WS2811/WS2812/APA-104/SK6812)  Length / Wide:5m / 10mm  Carrier material:white / self-adhesive backside  Connectors:Input: JST-SM4 male / DC-Connector Output: JST-SM4 female

 RGB HUB75 MatrixPanel P7.62 32x64The RGB HUB75 MatrixPanel P7.62 32x64 is a standard HUB75 matrix panelwith 32x64 pixels with a pixel pitch of 7.62mm.Each LED consists of a red, green and blue LED.This enables individual RGB control of each individual LED.The HUB75 MatrixPanels can be strung together.However, the maximum number of pixels must be observed by the HUB75 controller.The control can e.g. with these devices:HUB75E Dot-Matrix Control Specifications  Power supply:5V DC  Pixel count, height:32  Pixel count, width:64  Scan-Rate:1/16  RGB-Groups (Data Lines):2 (6)  Pixel pitch:7,62mm  Medium Power:400 W/m²  LED:2048x RGB (3in1)  Connection:HUB75 + POWER  Dimensions:244mm x 488mm  Delivery includes:1x RGB HUB75 MatrixPanel P7,62 32x64 1x HUB75 data cable 1x Power cable 1x Quick guide german / english Product DownloadsRGB HUB75 MatrixPanel P7.62 32x64Bedienungsanleitung RGB HUB75 MatrixPanel P7.62 32x64User Manual

 ArtNet PixxControl PX1The ArtNet PixxControl PX1 is a compact ArtNet (DMX over Ethernet) interface,which converts ArtNet directly to a control signals for several digital LEDs.For the ArtNet network connection a standard RJ45 network connector is used.Output with selectable pixel data protocolThe ArtNet PixxControl PX1 has one configurable output. The pixel data protocol (control signal)for different LED pixel types and other parameters can be selected separately.Adjustable color sequenceThe RGB color sequence is adjustable, which allows flexible uses.It is also possible to control RGBW pixels. Furthermore, a SingleColor optioncan be selected, where each pixel needs only one channel.Adjustable pixel groupThe ArtNet PixxControl PX1 supports pixel groups with adjustable length.Each pixel group behaves like a single pixel controlled via 3 DMX channels (RGB)or 4 DMX channels (RGBW). That reduces channels in installations with many pixels.RGB-LED-DisplayThe RGB LED displays the current operation status of the ArtNet PixxControl PX1 clearly.Muteable LED-DisplayThe LED displays on the ArtNet PixxControl PX1 can be switched off via ArtNet command (AcLedMute),RDM (DISPLAY_LEVEL) or time-controlled. This is especially helpful on stages to avoid disturbing "light spots".RDMThe important parameters such as the pixel type, the pixel group size or the color sequencecan be set individually for both data outputs via RDM.Free RDM-SoftwareTo set parameters via RDM our free software RDM-Configurator is available as download on our website www.dmx4all.de .DMX4ALL Communication-InterfaceThe ArtNet PixxControl PX1 has another communication interface which uses the DMX4ALL commands via TCP or UDP.Easy ConfigurationA user-friendly configuration via a web browser allows a quick and uncomplicated setting of all parameters.No special software is needed a normal web browser is enough. This means that the configuration is possibleat any time from a PC, smartphone or tablet.To set the IP address easily, the IP Configurator is offered as free download as PC tool or Android app.This allows the network settings of the PC or Android device to remain unchanged in order to configurethe IP of the ArtNet PixxControl PX1.Combinable with WiFi componentsThe ArtNet PixxControl PX1 can be integrated into WLAN networks in combination with a WLAN bridge.Firmware update functionTo use future functions, the ArtNet PixxControl PX1 offers a firmware update function.The update can be started from a web browser, so no access to the device is necessary!Top hat rail housing availableThe top-hat rail housing 350 or 350flat is available as accessory for the ArtNet PixxControl PX1. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (100mA@12V; 50mA@24V)  Connection:RJ45 Ethernet  5pin screw terminal  Protocol:Art-Net™ 4 (downward compatible) RDM  LED types:APA-101, APA-104, APA-102,max. 1360 pixel DycoLED PB3, DycoLED PB5,  GS8208,  INK1002, INK1003,  LC8808,  LPD1101, LPD8803, LPD6803, LPD8806,  LPD1886 8Bit, LPD1886 12Bit (8Bit controlled),  SK6812, SK6822, SK9822,  SM16703,  TM1804, TM1812, TM1814, TM1829, TM1934,  UCS1903, UCS1912, UCS2903, UCS2912,  WS2801, WS2811, WS2812, WS2812B,  WS2813, WS2815, WS2818, WS2821     LPD1886 12Bit (12Bit controlled),max. 680 pixel UCS9812 (8Bit controlled), UCS9812 (16Bit controlled)   Color Sequence:RGB selectable / RGBW SingleColor white, red, green, blue  Pixel groups:1 up to 127 pixel / all  Gamma correction:Selectable for LPD1886 12Bit (8Bit controlled), UCS9812 (8Bit controlled)  LED-Display:RGB Status-LED Ethernet-Status-LEDs yellow and green  Dimensions:29,2mm x 82mm Product DownloadsArtNet PixxControl PX1Bedienungsanleitung ArtNet PixxControl PX1User Manual ArtNet PixxControl PX1Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers

 ArtNet Multi PixxControlThe ArtNet Multi PixxControl is a very compact LED pixel controller for digital LED stripes. With a standard ArtNet (DMX over Ethernet)the combination to standard ethernet and WiFi components is possible.Selectable LED controllerThe used LED chip inside the connected digital LED Stripe is selected.Thus, the use of various digital LED Stripes is possible, for example:MagiarLED III flex, MagiarLED II flex, DycoLED, TM1804, TM1812, TM1814, WS2801, WS2811, LPD8803, LPD8806, UCS1903,UCS1912, UCS2912, APA-101, APA-102, APA-104, INK1002, INK1003, SK6812, SK9822, LPD1886 8Bit, LPD1886 12BitAdjustable color sequenceThe RGB color sequence is adjustable which allows universal usage.In addition, you can choose a single color option, in which each pixel has only one channel.Adjustable pixel groupArtNet Multi PixxControl supports pixel groups with an adjustable length.Each pixel group behaves as a single pixel on the 3 DMX channels is controlled.Thus, in extended installations save channels.Muteable LED indicatorThe LED indicators on the ArtNet Multi PixxControl are muteable by ArtNet command (AcLedMute) or time-controlled.This is helpful to disturbing "points of light" especially on stages.Easy ConfigurationA user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.No special software is required, a normal web browser is sufficient. Thus, the configuration at any timefrom your PC, smartphone or tablet device.For easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.This allows you to leave the network settings unchanged and can easily configure the IP.High quality and compact designThe ArtNet Multi PixxControl is designed with a 4-pin Neutrik metal XLR connector inside a compact aluminum body.Use together with WiFi componentsIn conjunction with a WiFi-bridge the ArtNet Multi PixxControl can be integrated into standard WiFi networks.As WiFi-bridge we suggest: Netgear WNCE2001.Firmware-Update-FunctionIn order to take advantage of future features, the ArtNet Multi PixxControl has a firmware update function.This can be launched from the browser so that no access to the device is necessary!This Interface will be supported from:Madrix - LED Lighting Control SolutionsDMX-Configurator 4PIXX (V2.x)Jinx!or any other software with ArtNet-outputWe suggest the software MADRIX® - LED Lighting Control Solutions for an easy and optimal controlling via ArtNet. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:5V with included power supply  Connection:RJ45 Ethernet Neutrik® XLR4 USB Mini-B only for the power supply  Protocol:Art-Net ™ (downward compatible)  LED types:MagiarLED III flex / MagiarLED II flexmax. 2720 Pixel TM1804 / TM1812 / TM1829max. 1360 Pixel WS2801max. 1360 Pixel LPD8803max. 1360 Pixel DycoLED / LPD6803 / LPD1101 / APA-101max. 1360 Pixel APA102 / SK9822max. 2720 Pixel LPD1886 - 8Bit oder 12Bitmax. 1360 Pixel WS2811 / WS2812(B) / APA-104 / SK6812max. 1360 Pixel INK1002 / INK1003max. 1360 Pixel UCS1903 / / UCS 1912 / UCS2912max. 1360 Pixel UCS9812max. 850 Pixel DMX512max. 170 Pixel DMX1024max. 340 Pixel  Gamma correction:in combination with LPD1886 - 12Bit, UCS9812  Color sequence:RGB adjustable / SingleColor red, green, blue, white RGBW with SK6812 / UCS2912  Pixel groups:adjustable, 1 - 10  Dimensions:75 x 26 x 35 mm  Delivery includes::ArtNet Multi PixxControl 5V power supply 1m RJ45 network cable 1:1 Product DownloadsArtNet Multi PixxControlBedienungsanleitung ArtNet Multi PixxControlUser Manual ArtNet Multi PixxControlFirmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit Application NotesArtNet Multi PixxControl mit Jinx ansteuernAppNote Controlling ArtNet Multi PixxControl with JinxAppNote

 ArtNet PixxControl PX2The ArtNet PixxControl PX2 is a compact ArtNet (DMX over Ethernet) interface,which converts ArtNet directly to two independent control signals for several digital LEDs.For the ArtNet network connection a standard RJ45 network connector is used.Two independent outputs with selectable pixel data protocolThe ArtNet PixxControl PX2 has two outputs, independently configurable. The pixel data protocol (control signal)for different LED pixel types and other parameters can be selected separately for each output.Selectable color sequenceThe RGB color sequence is adjustable, which allows flexible uses. It is also possible to control RGBW pixels.Furthermore, a SingleColor option can be selected, where each pixel needs only one channel.Adjustable pixel groupThe ArtNet PixxControl PX2 supports pixel groups with adjustable length.Each pixel group behaves like a single pixel controlled via 3 DMX channels (RGB) or 4 DMX channels (RGBW).That reduces channels in installations with many pixels.Voltage monitoringBoth data outputs are equipped with a voltage input, which allows monitoring of the LED voltage supplyvia the network. The voltage values can be called via RDM or with the web interface.CTRL OutputThe CTRL output can be used to switch off the power supply for the LED installation as soon as theArtNet PixxControl PX2 does not receive any data after 5 minutes or the connected digital LEDs don’t light up.RGB-LED-DisplayThe RGB LED displays the current operation status of the ArtNet PixxControl PX2 clearly.Mute able LED-DisplayThe LED displays on the ArtNet PixxControl PX2 can be switched off via ArtNet command (AcLedMute),RDM (DISPLAY_LEVEL) or time-controlled. This is especially helpful on stages to avoid disturbing "light spots".Easy ConfigurationA user-friendly configuration via a web browser allows quick and uncomplicated setting of all parameters.No special software is needed a normal web browser is enough. This means that the configuration ispossible at any time from a PC, smartphone or tablet.To set the IP address easily, the IP Configurator is offered as free download as a PC tool or Android app.This allows the network settings of the PC or Android device to remain unchanged in order to configurethe IP of the ArtNet PixxControl PX2.RDMThe important parameters such as the pixel type, the pixel group size or the color sequence can be set individuallyfor both data outputs via RDM. Also the voltage values of the LED power supply can be called via RDM.Free RDM-SoftwareTo set parameters via RDM our free software RDM-Configurator is available as download on our website www.dmx4all.de .DMX4ALL Communication-InterfaceThe ArtNet PixxControl PX2 has another communication interface which uses the DMX4ALL commands via TCP or UDP.Combinable with WiFi componentsThe ArtNet PixxControl PX2 can be integrated into WLAN networks in combination with a WLAN bridge.Firmware update functionTo use future functions, the ArtNet PixxControl PX2 offers a firmware update function.The update can be started from a web browser, so no access to the device is necessary!Top-hat rail housing availableThe top-hat rail housing 700 is available as accessory for the ArtNet PixxControl PX2. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (150mA@12V; 100mA@24V)  Connection:RJ45 Ethernet  12pin screw terminal  Ethernet:10 Mbit/s | 100 Mbit/s  Protocol:Art-Net™ 4 (downward compatible) RDM  LED types:APA-101, APA-104, APA-102,max. 1360 pixel per output DycoLED PB3, DycoLED PB5,  GS8208,  INK1002, INK1003,  LC8808,  LPD1101, LPD8803, LPD6803, LPD8806,  LPD1886 8Bit, LPD1886 12Bit (8Bit controlled),  SK6812, SK6822, SK9822,  SM16703,  TM1804, TM1812, TM1814, TM1829, TM1934,  UCS1903, UCS1912, UCS2903, UCS2912,  WS2801, WS2811, WS2812, WS2812B,  WS2813, WS2815, WS2818, WS2821     LPD1886 12Bit (12Bit controlled),max. 680 pixel per output UCS9812 (8Bit controlled), UCS9812 (16Bit controlled)     DMX512max. 512 DMX channels per output  Color Sequence:RGB selectable / RGBW SingleColor white, red, green, blue  Pixel groups:1 up to 127 pixel / all  Gamma correction:Selectable for LPD1886 12Bit (8Bit controlled), UCS9812 (8Bit controlled)  LED-Display:RGB Status-LED Ethernet-Status-LEDs yellow and green  Dimensions:64,2mm x 82mm Product DownloadsArtNet PixxControl PX2Bedienungsanleitung ArtNet PixxControl PX2User Manual ArtNet PixxControl PX2Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers

 ArtNet PixxControl PX2+The ArtNet PixxControl PX2+ is a compact ArtNet (DMX over Ethernet) interface,which converts ArtNet directly to two independent control signals for several digital LEDs.For the ArtNet network connection a standard RJ45 network connector is used.Two independent outputs with selectable pixel data protocolThe ArtNet PixxControl PX2+ has two outputs, independently configurable. The pixel data protocol (control signal)for different LED pixel types and other parameters can be selected separately for each output.Selectable color sequenceThe RGB color sequence is adjustable, which allows flexible uses. It is also possible to control RGBW pixels.Furthermore, a SingleColor option can be selected, where each pixel needs only one channel.Adjustable pixel groupThe ArtNet PixxControl PX2+ supports pixel groups with adjustable length.Each pixel group behaves like a single pixel controlled via 3 DMX channels (RGB) or 4 DMX channels (RGBW).That reduces channels in installations with many pixels.Voltage monitoringBoth data outputs are equipped with a voltage input, which allows monitoring of the LED voltage supplyvia the network. The voltage values can be called via RDM or with the web interface.CTRL OutputThe CTRL output can be used to switch off the power supply for the LED installation as soon as theArtNet PixxControl PX2+ does not receive any data after 5 minutes or the connected digital LEDs don’t light up.5 RGB-LED-DisplayFive RGB LEDs display the current operating status of the ArtNet PixxControl PX2+ and the output ports clearly.Muteable LED-DisplayThe LED displays on the ArtNet PixxControl PX2+ can be switched off via ArtNet command (AcLedMute),RDM (DISPLAY_LEVEL) or time-controlled. This is especially helpful on stages to avoid disturbing "light spots".Easy ConfigurationA user-friendly configuration via a web browser allows quick and uncomplicated setting of all parameters.No special software is needed a normal web browser is enough. This means that the configuration ispossible at any time from a PC, smartphone or tablet.To set the IP address easily, the IP Configurator is offered as free download as a PC tool or Android app.This allows the network settings of the PC or Android device to remain unchanged in order toconfigure the IP of the ArtNet PixxControl PX2+.RDMThe important parameters such as the pixel type, the pixel group size or the color sequence can be set individuallyfor both data outputs via RDM. Also the voltage values of the LED power supply can be called via RDM.Combinable with WiFi componentsThe ArtNet PixxControl PX2+ can be integrated into WLAN networks in combination with a WLAN bridge.Firmware update functionTo use future functions, the ArtNet PixxControl PX2+ offers a firmware update function.The update can be started from a web browser, so no access to the device is necessary! Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications  Power supply:8-24V DC (150mA@12V; 100mA@24V)  Connection:RJ45 Ethernet  12pin screw terminal  Protocol:Art-Net™ 4 (downward compatible) RDM  LED types:APA-101, APA-104, APA-102,max. 1360 pixel per output DycoLED PB3, DycoLED PB5,  GS8208,  INK1002, INK1003,  LC8808,  LPD1101, LPD8803, LPD6803, LPD8806,  LPD1886 8Bit, LPD1886 12Bit (8Bit controlled),  SK6812, SK6822, SK9822,  SM16703,  TM1804, TM1812, TM1814, TM1829, TM1934,  UCS1903, UCS1912, UCS2903, UCS2912,  WS2801, WS2811, WS2812, WS2812B,  WS2813, WS2815, WS2818, WS2821     LPD1886 12Bit (12Bit controlled),max. 680 pixel per output UCS9812 (8Bit controlled), UCS9812 (16Bit controlled)     DMX512max. 512 DMX channels per output  Color Sequence:RGB selectable / RGBW SingleColor white, red, green, blue  Pixel groups:1 up to 127 pixel / all  Gamma correction:Selectable for LPD1886 12Bit (8Bit controlled), UCS9812 (8Bit controlled)  LED-Display:5 RGB Status-LED Ethernet-Status-LEDs yellow and green  Dimensions:70mm x 90mm x 60mm Product DownloadsArtNet PixxControl PX2+Bedienungsanleitung ArtNet PixxControl PX2+User Manual ArtNet PixxControl PX2+Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers