DMX-PWM 8The DMX-PWM 8 is a small PWM decoder providing 8 independent PWM signals with 5V amplitude to control several power levels.8 PWM-OutputsIn total 8 independent PWM signals are available.5V AmplitudeThe PWM signals have a 5V amplitude (0V / 5V signal).0% – 100% Pulse control factorThe pulse control factor of the outputs is between 0% up to 100% via DMX with a resolution of 8 Bit adjustable.Outputs invertibleThe Personality can invert the outputs, within the SubDevice-Mode even each output itself.SubDevice-ModeWithin the SubDevice mode, each output has its own DMX address, operating mode (inverted/non-inverted)and DMX FAIL behavior via RDM.Compact DesignThe design and the compact structure allow an installation of this small assembly in areas with limited space.LED-DisplayThe integrated LED is a multifunctional display to signal the current device state.DMX AddressingThe DMX-Addressing occurs via RDM or prioritized via DIP switches.RDM SupportWith RDM via DMX the DMX-PWM 8 provides a device independent configuration.Free RDM-SoftwareTo set the RDM parameter our free software RDM-Configurator is on our web-site available as free download.Lockable Device SettingsThe RDM parameters Lock Pin and Lock State allow or avoid changes to stored RDM parametersin order to safe against unauthorized modifications. Specifications  Power supply:8-12 DC 50mA (without connected load)  Protocol:DMX512 RDM  DMX Channels:8 Channels  PWM Amplitude:3x (R/G/B) max. 10A each 5V  PWM Output Current:max. 10mA @ 5V (Source) max. 25mA @ 0V (Sink)  PWM resolution:256 steps (8-Bit), linear  PWM duty cycle:0-100%  PWM frequency:100 Hz / 200 Hz / 1000 Hz / 1500 Hz  Connectors:1x screw terminal / 2-pole 1x screw terminal / 3-pole 1x Pin connector RM2,54 / 2x5pin  Dimensions:70mm x 30mm Product DownloadsDMX-PWM 8Bedienungsanleitung DMX-PWM 8User Manual