Installation housing Spelsberg TK PS 99-6-m
€12.39
1 available
Delivery time: on stock (1 day)
- Direct from the manufacturer
- ships within 24 hours, Monday through Thursday
-
Made in Germany 
Made in Europe - technical support
Product information "Installation housing Spelsberg TK PS 99-6-m"
 Installations-Gehäuse 94x94x57 Spelsberg TK PS 99-6-m |
The TK - PS series has a high protection rating of IP 66, can be sealed as standard and is available with smooth side walls or with metric knockouts. No subsequent drilling or milling is required - simply knock out the knockouts with a screwdriver and install the screw connections. The material is very easy to work with for individual openings in smooth side walls. The housings are scratch-resistant. They are characterized by a high level of flexibility, e.g. through the range of accessories and the many fastening options inside the box, the adapted standard rails and the mounting plates. The lids are available in either gray or transparent. The wall fastening options in the box base and below the lid screws round off the wide range of possible uses.
| Specifications |
| Specifications: | With pre-stamping 7x M16/20 |
| Material: | Polystyrol (EPS) |
| Length: | 94 mm |
| Width: | 94 mm |
| Hight: | 57 mm |
Reiterweg 2A
44869 Bochum
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de
WarningPlease note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Waste disposalElectrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
We recommend the following for this product:
Montageset für Installations-Gehäuse TK PS 99-6-mMontageset für Installations-Gehäuse TK PS 99-6-m Technische Daten Inhalt:4x Abstandshalter 4x Schraube
Delivery time: on stock (1 day)
DCF77 SensorThe DCF77 Sensor is a receiver of the DCF77 radio clock time signal.The DCF antenna is tuned to the DCF77 time transmitter near Frankfurt.Based on the output signal, time and date can be determined to the second withthe help of an external analysis unit.A suitable installation housing with IP protection is available as accessory for mounting. Specifications Power supply:5-24V DC Output:Received DCF77 signal Receive frequency:77,5 kHz Connections:screw terminals 3pin Working temperature:-10°C up to 45°C Dimension:66mm x 66mm Product DownloadsDCF77 SensorBedienungsanleitung DCF77 SensorUser Manual
Delivery time: on stock (1 day)
DMX TwinPOE AP RDMThe DMX TwinPOE AP RDM is a compact ethernet interface (DMX via Ethernet),which can be used for Art-Net™/TPM2/sACN to DMX/RDM or DMX to Art-Net™.Two galvanically separated DMX UniversesThe DMX TwinPOE AP RDM offers two separated DMX connections which can be used as DMX-OUT or DMX-IN.Settable DMX frame rateIn the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.RDM via Art-Net™Supports RDM via Art-Net™ and thus enables connected RDM devicesto be configured via Art-Net™ using corresponding software.Multi-color LED displayThe LED-Display at the DMX TwinPOE AP RDM can be switched off via Art-Net™-Command (AcLedMute)or time controlled. This is very helpful to avoid disturbing “light points” on stage.LSA-PLUS Quick connection technologyThe LSA insulation displacement technology allows the individual wires to beattached quickly (e.g. for network installation cables).Easy ConfigurationA user-friendly configuration via web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible any time from PC, Smartphone or tablet. Compact designThe DMX TwinPOE AP RDM with a size of 66mm x 66mm is suitable forinstallation in the optionally available wall-mounted housing.Art-Net™ Merge-FunctionTwo Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.Firmware-Update-FunctionTo be able to use future functions, DMX TwinPOE AP RDM offers a firmware update function.This can be started from the web browser, so no access to the device is necessary!DMX4ALL communication interfaceThe DMX TwinPOE AP RDM has an additional communication interface that uses DMX4ALL commands via TCP or UDP.Surface housing availableA surface-mounted housing suitable for the DMX TwinPOE AP RDM is available as an accessory. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications Power supply:PoE with IEEE 802.af or 8-48V DC (200mA@12V; 110mA@24V; 65mA@48V) Connection:Ethernet: LSA-PLUS connection Power: Screw terminals DMX: Pin header RM2,54 DMX:adjustable each DMX connection: - 512 channels OUT - 512 channels IN DMX-Framerate:adjustable (5 - 44 fps) RDMRDM via Art-Net™ on-/off switchable DATA FAIL (DMX-OUT):HOLD last data CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES INTERNAL PROGRAM DMX-IN FAIL (DMX-IN):NO DATA HOLD last data CLEAR all to 0% SET all to 100% Protocol:Art-Net™ TPM2 sACN (Unicast) DMX4ALL commands Internal program:User configurable Stand-Alone program LED-Display:Multi-Color-LED (RGB) Dimensions:66mm x 66mm Product DownloadsDMX TwinPOE AP RDMBedienungsanleitung DMX TwinPOE AP RDMUser Manual DMX TwinPOE AP RDMEthernet VCP Driver 32 & 64bit - Version 1.10 DMX TwinPOE AP RDMFirmware Software & ToolsDMX4ALL Software PackWindows 32 & 64bit
Delivery time: on stock (1 day)