Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll.
€130.69
0 available
- Direct from the manufacturer
- ships within 24 hours, Monday through Thursday
-
Made in Germany
Made in Europe - technical support
Product information "LED-Dimmer DR4"
LED-Dimmer DR4 |
The LED-Dimmer DR4 is a compact LED-Dimmer controlling 4 separate LED outputs.
These can be used for RGB+W or for single, single-colored LED-Stripes.
The LEDs connection occurs via screw clamps.
Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).
Low-profile DIN-rail housing ![]()
The LED-Dimmer DR4 is designed as a FLAT version, featuring a low-profile DIN-rail housing for space-saving installation.
High Power Outputs
The outputs can drive a current of 10A.
So, a load of maximum 120W (12V) or rather 240W (24V) results.
10 user defined color changes/programs
The LED-Dimmer DR4 offers more than 10 user defined color changes.
These can be created via the web browser.
RGB-LED-Display
The RGB LED displays the current operation status of the LED-Dimmer DR4 clearly.
Mute able LED-Display The LED-Displays at the LED-Dimmer DR4 are disengageable
via ArtNet-Command (AcLedMute) or time-controlled.
Most of all this is very helpful on stages to avoid disturbing “light-points”.
Controlling via browser with Colorwheel or App The output control is available via an integrated web interface with a Colorwheel.
Alternatively each other app which supports Art-Net can be used.
DMX control ![]()
The outputs can be controlled via either Art-Net™ or DMX.
An adjustable priority determines which signal is to be used when both signals are present.
If the LED-Dimmer DR4 is controlled via Art-Net™, the DMX port can also be configured as a DMX output.
Firmware-Update-Function To use future functions the LED-Dimmer DR4 offers a Firmware-Update-Function.
Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated setting
of all parameters. No special software is necessary, a standard web browser is enough.
So, the configuration is possible every time from PC, Smartphone or tablet.
DMX4ALL Communication-Interface The LED-Dimmer DR4 has another communication interface which uses the DMX4ALL commands via TCP or UDP.
Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
DMX4ALL GmbH
Reiterweg 2A
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de

Please note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Electrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
Specifications |
| Power supply: | 12-24V DC / 100mA (corresponds to the LED voltage) |
| LED voltage: | 12-24V DC (no AC voltage !) |
| Protocol: | Art-Net™ |
| DMX512 | |
| DMX4ALL Commands | |
| LED Output: | 4x (R/G/B/W) max. each 10A |
| in sum 16A with common anode (+) | |
| common power supply | |
| PWM resolution: | 256 steps (8-Bit), linear |
| PWM duty cycle: | 0-100% |
| PWM frequency: | 240 Hz |
| DMX support: | DMX512 input or output |
| Priority adjustable | |
| Configuration: | via webbrowser |
| Connection: | RJ45 |
| Screw terminals | |
| Dimensions: | 70mm x 90mm x 33mm |
Product Downloads |
Software & Tools |
















