MEANWELL HDR-60-48 (48V/1,25A/60W)

 ArtNet-LED-Dimmer CC4The ArtNet-LED-Dimmer CC4 is designed for controlling LEDs,which are operated with constant current and works with up to 48V DC.4 Outputs with selectable constant current modulesSeveral constant current modules with different output currents to insert are available.The constant current modules are available as accessory and not included in delivery.For power supply from 12V up to 48VThe ArtNet-LED-Dimmer CC4 works with a power supply of 12V up to 48V.DMX or Art-Net™The ArtNet-LED-Dimmer CC4 can be controlled via DMX or ArtNet (DMX over Ethernet).Which signal is used prior can be selected.DMX-FAIL FunctionA DMX-FAIL-Function, which can be activated optionally, leaves the status unchangedin case of a DMX-Signal failure, turns off the output OFF (0%) or ON (100%).Disengageable LED-DisplaysThe LED-Displays at the ArtNet-LED-Dimmer CC4 can be disengaged viaArtNet-Command (AcLedMute) or time controlled. This is very helpfulto avoid disturbing “lights points” e.g. on stage.10 User defined Color Changes / ProgramsThe ArtNet-LED-Dimmer CC4 offers 10 user defined color changes.These can be created via a web browser or via the Android App „DMX4ALL Remote“.Test Function for Service PurposesFor test and service purposes it is possible to switch on the single outputs viathe web interface. So each output can be checked without an external control.Easy ConfigurationAn user friendly configuration via web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, anytime the configuration is possible from PC, Smartphone or tablet.For an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The network settings can be leaved unchanged and the IP can be configured without any problems.Firmware-Update-FunctionTo use future functions the ArtNet-LED-Dimmer CC4 offers a Firmware-Update-Function.The update can be started from a web browser, so no direct access to the device is necessary! Specifications  Power supply:9-48V DC / 150mA@12V; 80mA/24V; 60mA@48V (Current consumption without LED-Driver)  Ethernet:RJ45 (Art-Net™)  DMX:3pin screw terminal  DMX-Kanäle4 Channels (without master dimmer) 5 Channels (with master dimmer)  DMX-FAIL:HOLD / ALL OFF / ALL ON  Masterdimmer:activatable  Output:4 current regulated output (8 bit controlled) (Output current depends on the LED driver module)  PWM-Frequency:244 Hz  USB connector:5V / 500mA for power supply external devices (e.g. WLAN-Bridge)  Dimensions:99mm x 82mm  Constant current modules:Constant current LED-Driver LDD-H(available as an accessory)Constant current LED-Driver NLDD-H Product DownloadsArtNet-LED-Dimmer CC4Bedienungsanleitung ArtNet-LED-Dimmer CC4User Manual ArtNet-LED-Dimmer CC4Firmware

 DMX-LED-Dimmer CC1The DMX-LED-Dimmer CC1 is designed for controlling LEDs, which are operated with constant current and works with up to 48V DC.Output with selectable constant current modulesDifferent constant current modules with different output currents are available for connection.The constant current modules are available as accessories and are not included in the scope of delivery.Power supply from 12V up to 48VThe DMX-LED Dimmer CC1 works with supply voltages from 12V to 48V.0% to 100%The connected LEDs can be dimmed via PWM of 0% up to 100%.DMX FAIL-FunctionAn adjustable DMX FAIL-Function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-LED-Dimmer CC1 the configuration via RDM or DMX.Top hat rail mounting availableSuitable for the DMX-LED-Dimmer CC1 the DIN rail housing 350 is available as accessory. Specifications  Power supply:9-48V DC 20mA@12V; 11mA/24V; 6mA@48V (without LED driver)  Protocol:DMX512 / RDM  DMX channels1 DMX channel  DMX-FAIL:HOLD / 0-100%  Output:1 current regulated output (8 bit controlled) (Output current depends on the LED driver module)  PWM-Frequency:244 Hz  Dimensions:29,2mm x 82mm Product DownloadsDMX-LED-Dimmer CC1Bedienungsanleitung DMX-LED-Dimmer CC1User Manual

 DMX-LED-Dimmer CC4The DMX-LED-Dimmer CC4 is designed for controlling LEDs, which are operatedwith constant current and works with up to 48V DC.4 outputs with choose able constant current modulesDifferent constant current modules with different output currents are available for plug-on.The constant current modules are available as accessories and are not included in the scope of delivery.For voltages from 12V up to 24VThe DMX-LED-Dimmer CC4 works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to hold the current state (HOLD)or to adopt a predefined value if the DMX signal fails.LED state displayThe DMX state is indicated via the LED status.DMX-MasterdimmerOptionally an additional DMX channel can be activated as master dimmer.0% up to 100% dimmableThe connected LEDs are dimmed from 0% up to 100% via PWM.RDM supportThe DMX-LED-Dimmer CC4 allows configuration by RDM via DMX.Top-hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR.Together with the top-hat rail housing 1050, the interface is optimally suited for control cabinet installation. Specifications  Power supply:9-48V DC / 20mA@12V; 11mA/24V; 6mA@48V (without LED driver)  Output voltage:Depends on the constant current module used  Output current:Depends on the constant current module used  Protocol:DMX512 RDM  DMX-Channels:4 / 5 channels  DMX-FAIL:HOLD / ALL OFF / ALL ON  Masterdimmer:can be enabled  PWM-Frequency:244 Hz  Connections:Screw terminals  Dimensions:99mm x 82mm Product DownloadsDMX-LED-Dimmer CC4Bedienungsanleitung DMX-LED-Dimmer CC4User Manual