DMX STAGE-PROFI 1.1 PoE (XLR3)

€289.29*

Content: 1 Stck.

15 at stock.

Das Versandversprechen gilt nur für Artikel, die im Online Shop als DMX4ALL GmbH - DMX und RDM-Technik Made in Germany

angezeigt werden und Zahlungseingang per PayPal vorrausgesetzt.
Versand nur werktags von Montag bis Freitag (bis 13:00 Uhr) (nicht am Samstag, Sonntag und Feiertag).

Delivery time: 1-3 days

Piece

Product number: 99-0473

Manufacturer: DMX4ALL GmbH

Manufacturer product number: 99-0473

Weight: 0.35 kg

Delivery time: 1-3 days

Our benefits

Direct from the manufacturer
dispatch within 24 hours
Made in Germany
technical support

Our payment methods:

Product information "DMX STAGE-PROFI 1.1 PoE (XLR3)"

DMX STAGE-PROFI 1.1 PoE (XLR3)

The DMX STAGE-PROFI 1.1 PoE is a compact bidirectional Ethernet Gateway (DMX via Ethernet), which
can be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.

Via a standard RJ45 net work connection the connection to ethernet net work occurs.

Switchable DMX direction
The DMX direction can be switched according to usage.

Settable DMX frame rate
In the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.

RDM via Art-Net™
Supports RDM via Art-Net™ and thus enables connected PoE devices to be configured via Art-Net™ using corresponding software.

Muteable LED Display
The LED-Display at the DMX STAGE-PROFI 1.1 PoE is disengageable via Art-Net™-Command (AcLedMute)
or time controlled. This is very helpful to avoid disturbing “light points” on stage.

Easy Webbrowser-Configuration
A user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.
No special software is required, a normal web browser is sufficient. Thus, the configuration at any time
from your PC, smartphone or tablet device.

DMX-Monitor New Feature
The DMX monitor is available via the web interface. This means that the current DMX values
can be displayed and checked simultaneously without any additional software.

DMX-Fader
The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.

Easy Network Configuration
For easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.
This allows you to leave the network settings unchanged and can easily configure the IP.

High quality and Compact Design
The DMX STAGE-PROFI 1.1 PoE is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.

Art-Net™ Merge-Function
Two Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.

Combinable with WiFi components
In combination with a WLAN bridge the DMX STAGE-PROFI 1.1 PoE can also be integrated into WLAN net works.

Firmware update function
To use future functions the DMX STAGE-PROFI 1.1 PoE offers a Firmware-Update-Function.
This can be started with any web browser, so no direct access to the device is necessary!

DMX4ALL Communication-Interface
The DMX STAGE-PROFI 1.1 PoE has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages.

Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.

Specifications


Power supply:	PoE according to IEEE 802.af

	or 5V DC via attached external power supply
Connection:	RJ45 Ethernet
	USB Mini-B
	Neutrik® XLR3

Ethernet:	10 Mbit/s \| 100 Mbit/s
	DHCP
	PoE

DMX:	Selectable:
	- 512 channels OUT
	- 512 channels IN

DMX-Framerate:	Adjustable (5 - 44 fps)

RDM:	RDM via Art-Net™ (switchable on/off)

ArtDmx Fail:	HOLD last data
(DMX-OUT)	CLEAR all to 0%
	SET all to 100%
	NO OUTPUT
	DEFAULT VALUES
	INTERNAL PROGRAM

DMX Fail:	HOLD last data
(DMX-IN)	CLEAR all to 0%
	SET all to 100%
	NO OUTPUT
	DEFAULT VALUES

Protocol:	Art-Net™ (downwards compatiblel)
	Ethernet-VCP (Virtual COM Port)
	USB-VCP (Virtual COM Port)
	TPM2
	sACN (Unicast)
	DMX4ALL-Commands via TCP, UDP, VCP

Internal programs:	User-configurable stand-alone programs

Status LED:	Green: Ethernet Connection
	Yellow: Datatransfer

Dimensions:	75mm x 26mm x 35 mm

Produkt Downloads

DMX STAGE-PROFI 1.1 PoE
Bedienungsanleitung
DMX STAGE-PROFI 1.1 PoE
User Manual
DMX STAGE-PROFI 1.1 PoE
Ethernet VCP Driver 32 & 64bit - Version 1.10
DMX STAGE-PROFI 1.1 PoE
USB VCP Driver 32 & 64bit - Version 42.0.1.0
DMX STAGE-PROFI 1.1 PoE
Firmware

Software & Tools

DMX-Configurator V2
Windows 32 & 64bit
DMX-Configurator V2
Bedienungsanleitung
DMX-Configurator V2
User Manual
IP Configurator (ArtNet Produkte)
Windows 32 & 64bit
IP Configurator
Anwendungshinweis
IP Configurator
Application Note
DMX4ALL Commands
DMX4ALL Commands for Third-Party Developers
RDM Configurator (ArtNet Produkte)
Windows 32 & 64bit
RDM Configurator
Bedienungsanleitung
RDM Configurator
User Manual

Manufacturer "DMX4ALL GmbH"

Wir bieten
professional space with a human face

Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll. Der Familienbetrieb entwickelt und produziert seit 2004 elektronische Schaltungen für Clubs, Bühne und Beleuchtung. Die Produktpalette ist mit den Bedürfnissen der Kunden gewachsen und reicht heute vom einfachen DMX-Dekoder über verschiedene Abspieler und ArtNet PoE Interfaces bis hin zu modernen LED-Dimmern Stepper und innovativen LED Pixel-Kontrollern.

Related links of the manufacturer

We recommend the following for this product:

5 Port Ethernet Switch NS202P

5 Port Ethernet Switch NS202PThe unmanaged Industrial Ethernet switches from LogiLink are particularly suitablefor use in harsh environments thanks to the extended temperature range of -40°C to 80°C.These robust and compact devices enable the connection of several end devices,with power supply via the same Ethernet patch cable (PoE).Due to their flexibility and simplicity, these switches are not only suitable for industrial applications.- Industrial switch, 10/100/1000Base-TX RJ45- 4-port PoE, 802.3at/af, 30 W max. each port- Unmanaged, easy installation, plug-and-play- Compact and rugged metal housing, IP40- Free fall, shock and vibration stability- Power input: 48 to 57 V DC- Suitable for DIN-rail mounting- Extended operation temperature: -40 °C - +80 °C

Product number: 40-9919

Delivery time: 1-3 days

€79.95*

Neutrik NA3M5F

Neutrik NA3M5F3 pole XLR male - 5 pole XLR female for lighting (DMX) applicationsFeatures & Benefits- Compact XLR 3 to 5 pole adapter for lighting (DMX) applications- Solve interconnection problems of the 3-pole and 5-pole DMX standard- Professional look and compact space saving design, based on the XX Series- Rugged diecast shell for best reliabilityTo use with: - ArtNet-DMX STAGE-PROFI 1.1- ArtNet-DMX UNIVERSE 4.1- NanoDMX USB-Interface[TAB:Specifications] Specifications Manufactor:NEUTRIK Title:NA3M5F Connection Type:Adapter

Product number: 10-1105

Delivery time: 1-3 days

€14.99*

Neutrik NA3MM

Neutrik NA3MM3 pole XLR male - 3 pole XLR male (gender conversion adapter) Features & Benefits- Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems- Professional look and compact space saving design, based on the XX Series- Rugged diecast shell for best reliabilityTo use with: - ArtNet-DMX STAGE-PROFI 1.1 (using DMX-INPUT mode) Specifications Manufactor:NEUTRIK Title:NA3MM Connection Type:Adapter

Product number: 10-1104

Delivery time: 1-3 days

€12.99*

HICON SGHN-0100-SW XLR-Cable 1m 3pin

HICON SGHN-0100-SW XLR-Kabel 1m 3polSommer Cable SGHN-0100-SWThe Stage 22 Highflex is a high-quality, very reasonably priced cable with awire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket.It is filled with PVC almost all the way to the core and allows for excellent reeling.We supply it with HICON HI-X3CM or HI-X3CF XLR connectors, with a 6-fold strain relief.- Outside diameter 6,4 mm, 2x 0,12 mm²- 1 XLR-plug 3pin to 1 XLR-jack 3pin- Length: 1 m Specifications Length:1m Manufactor:Sommer cable Partnumber:SGHN-0100-SW Name:Stage 22 Highflex Inner conductor:2x 0,22 mm² Connector:HICON Type:XLR 3-pol female / XLR 3-pol male

Product number: 10-2201

Delivery time: 1-3 days

€18.90*
€22.00* (14.09% saved)

XLR-Cable 10m 3pin

XLR-Kabel 10m 3polMicrophone and symmetric connecting cable- 2 cores shielded SCHULZ Kabel MK 6- Braided shield- Outside diameter 6 mm, 2 x 0,12 mm²- 1 XLR-plug to 1 XLR-jack- Length: 10 m Specifications Length:10m Manufactor:DMX4ALL Cable:SCHULZ Kabel MK 6 Connector:SCHULZ Type:XLR 3-pol female / XLR 3-pol male

Product number: 10-2210

Delivery time: 1-3 days

€8.50*
€14.99* (43.3% saved)

XLR-Cablel 15m 3pin

XLR-Kabel 15m 3polMicrophone and symmetric connecting cable- 2 cores shielded SCHULZ Kabel MK 6- Braided shield- Outside diameter 6 mm, 2 x 0,12 mm²- 1 XLR-plug to 1 XLR-jack- Length: 15 m Specifications Length:15m Manufactor:DMX4ALL Cable:SCHULZ Kabel MK 6 Connector:SCHULZ Type:XLR 3-pol female / XLR 3-pol male

Product number: 10-2215

Delivery time: 1-3 days

€10.95*
€17.99* (39.13% saved)

HICON SGHN-0500-SW XLR-Cable 5m 3pin

HICON SGHN-0500-SW XLR-Kabel 5m 3polSommer Cable SGHN-0500-SWThe Stage 22 Highflex is a high-quality, very reasonably priced cable with awire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket.It is filled with PVC almost all the way to the core and allows for excellent reeling.We supply it with HICON HI-X3CM or HI-X3CF XLR connectors, with a 6-fold strain relief.- Outside diameter 6,4 mm, 2x 0,12 mm²- 1 XLR-plug 3pin to 1 XLR-jack 3pin- Length: 5 m Specifications Length:5m Manufactor:Sommer cable Partnumber:SGHN-0500-SW Name:Stage 22 Highflex Inner conductor:2x 0,22 mm² Connector:HICON Type:XLR 3-pol female / XLR 3-pol male

Product number: 10-2205

Delivery time: 1-3 days

€25.49*
€29.50* (13.59% saved)

You might also be interested in:

DMX-RELAIS 2

DMX-RELAIS 2The DMX-RELAIS 2 is designed for switching loads of several kinds.Two potential free switching outputs2 potential free switching outputs up to 8A switching capacity are available.Switch per relayThe switching contacts are designed as changeover switches and can switch resistive loads.Switching contact for direct and alternating voltageThe version is suitable to switch resistive loads using direct voltage (DC) oralternating voltage (AC).For voltages from 12V up to 24VThe DMX-Relais 2 works with supply voltages from 12V up to 24V DC.DMX FAIL-FunctionAn adjustable DMX FAIL function offers the option to holdthe current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX-Relais 2 INRUSH allows the configuration via RDM or DMX.Several operating modesThe DMX-Relais 2 offers several operating modes which can be set via jumper or RDM.Top hat rail mounting availableSuitable for the DMX-Relais 2 the DIN rail housing 700 is available as accessory. Specifications Power supply:12-24V DC / 250mA (150mA@12V / 100mA@24V) Protokoll:DMX512 RDM DMX-Channels:1 or 2 DMX-channels DMX-FAIL:Hold / 0-100% Operation modes:Hysteresis 127/128 Hysteresis 0/1 Hysteresis 100/150 Exclusive Monostable 1Second FogControl Output:2 potential free switching contacts DC: max. 8A/250V~ (resistive loads) DC: According to the max. DC load graph Connectors:screw terminals Dimensions:64,2mm x 82mm Product DownloadsDMX-RELAIS 2Bedienungsanleitung DMX-RELAIS 2User Manual

Product number: 90-0222

Delivery time: 1-3 days

€70.58*

DMX-Relais/Analog 1

DMX-Relais/Analog 1The DMX Relais/Analog 1 is designed for several kinds of controlling tasks.Potential free switch outputOne potential free switch output (normally open / NO) with up to 8A switching capacity is available.Switching contact for direct and alternating voltageThe switching contact is suitable for switching both direct voltage and alternating voltage.Analog control outputOne control output with 0-10V or 1-10V are available for control devices with analog input.For voltages from 12V up to 24VThe DMX Relais/Analog Interface 1 runs with supply voltages from 12 up to 24V direct voltage.DMX FAIL-FunctionAn adjustable DMX FAIL-Function offers the option to hold the current state (HOLD) or to adopt a predefined value if the DMX signal fails.RDM supportThe DMX Relais/Analog Interface 1 the configuration via RDM or DMX.Several operating modesThe DMX Relais/Analog Interface 1 offers several operating modes which can be set via jumper or RDM:- Relay + Analog 8Bit 0-10V- Relay + Analog 8Bit 1-10V- Relay + Analog 10Bit 0-10V- Relay + Analog 10Bit 1-10V- Relay & Analog 8Bit 0-10V- Relay & Analog 8Bit 1-10V- Relay & Analog 10Bit 0-10- Relay & Analog 10Bit 1-10VTop hat rail mounting availableSuitable for the DMX Relais/Analog Interface 1 the DIN rail housing 350 is available as accessory. Specifications Power supply:12-24V DC 100mA@12V / 70mA@24V Protocol:DMX512 / RDM DMX channels:1 or 2 channels Output:1 switching contact NO max. 8A / 250V~ (165A@20ms Switch-on peak current) 1x analog output 0-10V / 1-10V DMX-FAIL:Hold / 0-100% Connectors:screw terminals Dimensions:29,2mm x 82mm Product DownloadsDMX-Relais/Analog 1Bedienungsanleitung DMX-Relais/Analog 1User Manual

Product number: 90-5241

Delivery time: 1-3 days

€83.82*

DMX-Relais/Analog 4

DMX-Relais/Analog 4The DMX-Relais/Analog 4 is designed for switching loads of several kinds.Four potential free contacts with up to 8A switching power are available.Additional four analog outputs with 0-10V or 1-10V can be used to control systems with analog inputs.This relay outputs are suitable for switching DC or AC voltage.A DMX FAIL function hold the relays and analog states unchanged or switch off at a loss of DMX signal. Specifications Power supply:12-24V DC / 250mA Input:4 up to 12 DMX-channels Output:4 switching contacts (close) each max. 8A / 250V~ (165A/20ms Switch-on peak current) 4x analog output 0-10V / 1-10V DMX-FAIL:Hold / Off Connectors:screw terminals Dimensions:99 x 82mm Product DownloadsDMX-Relais/Analog 4Bedienungsanleitung DMX-Relais/Analog 4User Manual

Product number: 90-5244

Delivery time: 1-3 days

€182.93*

DMX-Splitter 4 RDM+

DMX-Splitter 4 RDM+The DMX-Splitter 4 RDM+ is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.4 galvanically isolated outputsThe DMX-Splitter 4 RDM+ is a compact DMX and RDM distributor that makes a DMX input signalavailable again at four galvanically isolated outputs.DMX and RDMIn contrast to pure DMX splitters, the RDM information is passed in bothdirections in addition to the DMX signal.RDM filterWhen the RDM filter is switched on, all RDM information are filtered out and no longer passedon to the outputs. This can prevent malfunction / flickering of non-RDM-capable devices.Settings possible via RDMThe DMX-Splitter 4 RDM is recognized as an independent RDM device and settings can be made via RDM.Extremely light constructionExtremely light DC/DC converters are used for galvanic isolation.Power supply via one power supply unitThe power supply occurs via one power supply unit. The voltage range is between 8V up to 24V.3 RGB-LEDsThree RGB LEDs clearly indicate the current operating status.Touch-ControlThe DMX-Splitter 4 RDM+ has an integrated touch control field to turn on/off the RDM filter. Switchable LED-DisplayThe LED-Display at the DMX-Splitter 4 RDM+ can be switched off via RDM command or time-controlled,so that no disturbing light sources are present during operation. Specifications Power supply:8-24V DC Power consumption:200mA@12V / 130mA@24V (no load) Protocol:DMX512 RDM Input:1x DMX512 / RDM Output:4x DMX512 / RDM galvanically isolated RDM filter:Can be switched on / off TOUCH-Control:1 sensor button directly on the device and 3 RGB status LEDs Connections:screw terminals Dimensions:70mm x 90mm x 60mm Product DownloadsDMX-Splitter 4 RDM+Bedienungsanleitung DMX-Splitter 4 RDM+User Manual

Product number: 99-0824

Delivery time: 1-3 days

€227.05*

Tools & Equipment:

Ethernet cable 0,5m

Netzwerkkabel 0,5m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:0,5m Color:black

Product number: 10-3000

Delivery time: 1-3 days

€1.89*

Ethernet cable 10m

Netzwerkkabel 10m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:10m Color:black

Product number: 10-3010

Delivery time: 1-3 days

€4.99*

RJ45 Ethernet cable 1m

Netzwerkkabel 1m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:1m Color:black

Product number: 10-3001

Delivery time: 1-3 days

€2.99*

Ethernet cable 30m

Netzwerkkabel 30m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:30m Color:black

Product number: 10-3030

Delivery time: 1-3 days

€24.95*

RJ45 Ethernet cable 5m

RJ45 Netzwerkkabel 5m- shielded LAN/network cable to connect network components with 2 x RJ45 connectors- outer shield: foil screening- with 3µ gold plated PINs- with length indication on the slimline strain relief- with latch protection- pair-sequence acc. to EIA/TIA 568B Specifications Specification:CAT 5e Connector:RJ45 male (8P8C), both sides Kink protection:both sides Length:5m Color:black

Product number: 10-3005

Delivery time: 1-3 days

€4.76*

Software:

DMX-Configurator FREE-Version

DMX-Configurator FREE-VersionThe controlling software DMX-Configurator 4PIXX represents a user friendly surface to create light scenes (programs). Up to 8 DMX-universes can be used which can be represented as pixel-matrix.A live operation with a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export to DMX4ALL DMX-Player and SD-Card-Player. All in all, in many areas an application will be possible.The FREE-Version is available as download for free and has the following functions.Range of function:1 DMX OUT universeArtNet SupportCue-ListRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to create LED-Pixel screensPreview for LED-Pixel screensRemote Manager (MIDI / TIMER / DMX)Secutity functions: Password protected programming fileExport/Import of scenesExport/Import of stepsExport for NanoSD Player / ArtNet-Player 4 / DMX-Player S/L/ONELimits of FREE-Version:Multi Interface Support with 16 DMX universes can be used with up to 2 scenesTOUCH-Mode (Time limited)No secutity functionsNo hardware secutity functions ArtNet Player 4 Operating system:Windows® 7, Windows® 8 Software-Updates:Available as download Produkt DownloadsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote

Product number: 70-0122

Delivery time: 1-3 days

€0.00*

Details

DMX-Configurator PRO-Version

DMX-Configurator PRO-VersionThe controlling software DMX-Configurator represents a user friendly surface to create light scenes (programs). Up to 16 DMX-universes can be used which can be represented as pixel-matrix. A live operationwith a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export toDMX-Player and SD-Card-Player. All in all, in many areas an application will be possible. The BASIC-Version use a USB-Dongle needing a free USB-slot. The Dongle can be used on several computer and is easy usable for service tasks. Range of functions:16 DMX OUT + 16 DMX-IN universesMulti Interface SupportCuelistArtNet SupportRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to generate LED-Pixel for lines and screensPreview for LED-Pixel for lines and screensTOUCH-ModeRemote Manager (MIDI / TIMER / DMX)Export/Import of scenesExport/Import of stepsExport for AvengerSD / NanoSD Player / ArtNet-Player 4 / ArtNet MultiPixxPlyer 16 / DMX-Player S/L/ONESecurity functions: Optional password for programming fileHardware secutity functions: Program execution can be limited by using the hardware serial number Important InformationPlease note that the software is excluded from change and return ! ArtNet Player 4 Operating system:Windows® 7, Windows® 8, Windows® 10 PC-connections:USB 1.1 / USB 2.0 Scope of delivery:USB-Dongle with PRO-Licence DMX4ALL lanyard with dongle holder Software-Updates:Available as download Produkt DownloadsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX-Configurator PRO-VersionUSB Driver Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote

Product number: 70-0123

Delivery time: 1-3 days

€299.00*