Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll.
LED-Stripe RGBWW 24V 5m 60WS
€99.00
Delivery time: on stock (1 day)
8 available
- Direct from the manufacturer
- ships within 24 hours, Monday through Thursday
-
Made in Germany 
Made in Europe - technical support
Product information "LED-Stripe RGBWW 24V 5m 60WS"
 LED-Stripe RGBWW 24V 5m 60WS |
An easy installation due to optimal flexibility and with a self-adhesive backside the stripes stick to almost each surface.
Ideal for room and scenery lighting.
Due to the low dimensions an application is possible where usual standard-illuminant can not be used.
Colour: Red / Green / Blue / Warm-White in one LED (4-in-1) !!!
Assembled with 300 RGBWW SMD-LEDs on 5m.
| Specifications |
| Power supply: | 24V DC / Common Anode (+) |
| max. Power consumption: | 19,2 W/m |
| LED Type: | SMD5050 RGBWW (4-in-1) |
| CCT: | 2800-3200K |
| LED view angle: | 120° |
| Design: | self-adhesive backside |
| 300x RGBWW LED (60 LEDs/m) | |
| divisible each 6 LEDs / 10cm | |
| delivery on plastic reel | |
| Length / Wide: | 5m / 12mm |
Reiterweg 2A
44869 Bochum
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de
WarningPlease note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Waste disposalElectrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
We recommend the following for this product:
ArtNet-LED-Dimmer 4 MK2The ArtNet-LED-Dimmer 4 MK2 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via removable screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).High Power OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.10 user defined color changes/programsThe ArtNet-LED-Dimmer 4 MK2 offers more than 10 user defined color changes.These can be created via the web browser or the Android App „DMX4ALL Remote“.Disengageable LED-Display The LED-Displays at the ArtNet-LED-Dimmer 4 MK2 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.For an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The network settings can be leaved unchanged and the IP can be configured without any problems.Controlling via browser or App with Colorwheel / Slider The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.Firmware-Update-Function To use future functions the ArtNet-LED-Dimmer 4 MK2 offers a Firmware-Update-Function.This can be started from a web browser, so that no direct access to the device is necessary!DMX4ALL Communication-Interface The ArtNet-LED-Dimmer 4 MK2 has a further TCP-Communication-Interface.This interface uses the DMX4ALL-Commands with TCP-Commands via TCP-Packages to Port 10001. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications Power supply:12-24V DC / 100mA (=LED voltage) LED voltage:12-24V DC (no AC voltage !) Connection:RJ45 Ethernet LED-connection:R/G/B + W screw terminals max. 10A with common anode (+) USB-connection:5V / 500mA for power supply external devices (e.g. WLAN-bridge) PWM-Frequency:250 Hz Dimensions:115mm x 54mm x 23mm DMX4ALL Commands Protocol:Art-Net 3 ™ DMX4ALL Commands Product DownloadsArtNet-LED Dimmer 4 MK2Bedienungsanleitung ArtNet-LED Dimmer 4 MK2User Manual ArtNet-LED Dimmer 4 MK2Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers
Delivery time: on stock (1 day)
ArtNet-LED-Dimmer 4 MK2+The ArtNet-LED-Dimmer 4 MK2 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via removable screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).High Power OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.10 user defined color changes/programsThe ArtNet-LED-Dimmer 4 MK2 offers more than 10 user defined color changes.These can be created via the web browser or the Android App „DMX4ALL Remote“.Disengageable LED-Display The LED-Displays at the ArtNet-LED-Dimmer 4 MK2 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.For an easy setting of the IP we provide the IP-Configurator as PC-Tool or Android-App for free.The network settings can be leaved unchanged and the IP can be configured without any problems.Controlling via browser or App with Colorwheel / Slider The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.High quality and compact design The ArtNet-LED-Dimmer 4+ MK2 is manufactured with removable clamps.Furthermore, the ArtNet LED Dimmer 4+ MK2 is mounted in a compact aluminum housing.Firmware-Update-Function To use future functions the ArtNet-LED-Dimmer 4 MK2 offers a Firmware-Update-Function.This can be started from a web browser, so that no direct access to the device is necessary!DMX4ALL Communication-Interface The ArtNet-LED-Dimmer 4 MK2 has a further TCP-Communication-Interface.This interface uses the DMX4ALL-Commands with TCP-Commands via TCP-Packages to Port 10001. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications Power supply:12-24V DC / 100mA (=LED voltage) LED voltage:12-24V DC (no AC voltage !) Connection:RJ45 Ethernet LED-connection:R/G/B + W screw terminals max. 10A with common anode (+) USB-connection:5V / 500mA for power supply external devices (e.g. WLAN-bridge) PWM-Frequency:250 Hz Dimensions:115mm x 74mm x 23mm Protocol:Art-Net 3 ™ DMX4ALL Commands Product DownloadsArtNet-LED Dimmer 4 MK2+Bedienungsanleitung ArtNet-LED Dimmer 4 MK2+User Manual ArtNet-LED Dimmer 4 MK2+Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit DMX4ALL CommandsDMX4ALL Commands for Third-Party Developers
Delivery time: on stock (1 day)
DMX-LED-Dimmer 4The DMX-LED-Dimmer 4 is a compact LED-Dimmer with 4 seperate LED-outputs.These can be used for RGB/ RGB+W or for single color stripes.The connectors for LED,power supply and DMX are made with removable screw terminals.Can be used from 12V to 48VThe DMX-LED Dimmer 4 can be used in a wide power supply range from 12V to 48V.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V) / 240W (48V).Customizable LookUp tablesThe DMX-LED-Dimmer 4 has one LookUp-Table per output.The definition of the LookUp tables is done via the USB port using theprogram DMX-Configurator, which is available as a free download.Removable screw terminalsThe DMX-LED Dimmer 4 is designed with removable screw terminals.16 Million ColorsWith the RGB-LED-Stripe up to 16 million colours can be adjusted.By using an additional single color white stripe it is possible to makecolor neutral illuminations or pastel colours.Firmware-Update-FunctionIn order to take advantage of future features, the DMX-LED-Dimmer 4 has a firmware update function. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd. Specifications Power supply:12-48V DC / 50mA without load (=LED voltage) LED voltage:12-48V DC (no AC voltage !) (=power supply voltage) DMX-IN:4 channels + optional Master-Dimmer-Channel DMX-Fail:Hold / Off / On Ausgang:4 PWM-Signal with 16 Bit resolution common supply voltage Output current:max. 10A each output with 12V or 24V max. 5A each output with 48V max. 10A in sum through all outputs Output :120W (12V) / 240W (24V) / 240W (48V) PWM-Frequency:244 Hz / 4kHz Master-Dimmer:None / Masterdimmer / System-Masterdimmer StandAlone-Function:9 internal StandAlone-Programs Dimensions:80mm x 50,5mm Product DownloadsDMX-LED-Dimmer 4Bedienungsanleitung DMX-LED-Dimmer 4User Manual DMX-LED-Dimmer 4USB Driver - Version 6.0.0.0 DMX-LED-Dimmer 4Firmware Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual
Delivery time: on stock (1 day)
DMX-LED-Dimmer X9The DMX-LED-Dimmer X9 is especially designed for controlling RGB LED-Stripes.The dimmer has 9 PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9 has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9 operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9 can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.RDM supportThe DMX-LED-Dimmer X9 allows configuration by RDM via DMX.LED-State DisplayThe DMX state is indicated via the LED status.Stand-Alone FunctionAs an alternative to DMX control, internal color sequences can be called upvia the address switch without external DMX control.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9. Specifications Power supply:7-24V DC 80mA@12V / 100mA@24V (without connected LED load) LED voltage:7-24V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-controlling DMX-FAIL:Hold / 0%-100% Output:9 PWM-signal with 8Bit-resolution Common supply voltage Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) PWM-Frequency:244 Hz Energy-Save output:Control output for switching off the load power supply units StandAlone function:9 internal StandAlone programs Connections:Screw terminals Dimensions:99mm x 82 mm Product DownloadsDMX-LED-Dimmer X9Bedienungsanleitung DMX-LED-Dimmer X9User Manual Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit
Delivery time: on stock (1 day)
DMX-LED-Dimmer X9HRThe DMX-LED-Dimmer X9HR is especially designed for controlling RGB LED-Stripes.The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9HR has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9HR operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB group. The global master dimmer is fixed atDMX address 1 and can be used as system master dimmer.Adjustable dimming curveThe dimming curves can be configured individually for each output.RDM supportThe DMX-LED-Dimmer X9HR allows configuration by RDM via DMX.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Firmware-Update-FunctionTo use future functions, the DMX-LED-Dimmer X9HR offers a firmware update function.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR. Specifications Power supply:7-24V DC 80mA@12V / 100mA@24V (without load) LED voltage:7-24V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-Mode 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels Masterdimmer:None / Global / RGB / System DMX-FAIL:Hold / 0%-100% 8bit ModePWM-Frequency 488 Hz with LookUp-Table 2 kHz or 4 kHz without LookUp-Table 16bit ModePWM-Frequency 488 Hz without LookUp-Table Output:9 PWM-signal common supply voltage anode (PLUS) Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) Energy-Save output:Control output for switching off the load power supply units StandAlone function:9 internal StandAlone programs Connections:Screw terminals Dimensions:99mm x 82 mm Produkt DownloadsDMX-LED-Dimmer X9HRBedienungsanleitung DMX-LED-Dimmer X9HRUser Manual DMX-LED-Dimmer X9HRUSB Driver (ab V2.2)Version 6.0.0.0 DMX-LED-Dimmer X9HRFirmware (ab V2.2) Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit
Delivery time: on stock (1 day)
DMX-LED-Dimmer X9HR+The DMX-LED-Dimmer X9HR+ is especially designed for controlling RGB LED-Stripes.The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9HR+ has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V).0% to 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9HR+ operates with supply voltages from 12V up to 24V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lost DMX signal thecurrent state (HOLD) or to adopt a predefined value if the DMX signal fails.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs) orone master dimmer per RGB group. The global master dimmer is fixed at DMX address 1 andcan be used as system master dimmer.Adjustable dimming curveThe dimming curves can be configured individually for each output.RDM supportThe DMX-LED-Dimmer X9HR+ allows configuration by RDM via DMX.SubDevice-ModeWithin the SubDevice Mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.Touch-ControlThe DMX-LED-Dimmer X9HR+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status displayVia a RGB status display the DMX reception is shown.Firmware-Update-FunctionTo use future functions, the DMX-LED-Dimmer X9HR+ offers a firmware update function. Specifications Power supply:7-24V DC 100mA@12V / 150mA@24V (without load) LED voltage:7-24V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-controlling and LookUp-Table 18 channels with 16Bit-controlling + optional Master-Dimmer-Channels Output:9 PWM-signal common supply voltage anode (PLUS) 8bit ModePWM-Frequency 488 Hz with LookUp-Table 2 kHz or 4 kHz without LookUp-Table 16bit ModePWM-Frequency 488 Hz without LookUp-Table Masterdimmer:None / Global / RGB / System DMX-FAIL:Hold / 0%-100% Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) CTRL output:Control output for switching off the load power supply units (Energy-Save) StandAlone function:9 internal StandAlone programs Display:7 segment display RGB LED TOUCH-Control:3 touch buttons Connectors:Screw terminals Dimensions:105mm x 90mm x 60mm Produkt DownloadsDMX-LED-Dimmer X9 HR+Bedienungsanleitung DMX-LED-Dimmer X9 HR+User Manual DMX-LED-Dimmer X9 HR+USB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9 HR+Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit
Delivery time: on stock (1 day)
DMX-LED-Dimmer X9HRXThe DMX LED Dimmer X9HRX is a 9-channel LED driver with 16-bit grayscale adaptive pulse density modulation (APDM)and a high output frequency of up to 8kHz at the same time.Thanks to the special APDM technology in combination with the optimized 48V LED drivers,the DMX LED dimmer X9HRX is perfectly suited for controlling RGB, RGBW or even single-color W stripes.9 OutputsThe DMX-LED-Dimmer X9HRX has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A. So it is possible to connect a maximum loadof 120W (12V) / 240W (24V) / 240W (48V).High efficiencyThe 48V LED drivers are designed to allow the DMX LED Dimmer X9HRXto operate without active cooling (no fan).0% up to 100% dimmableThe connected LEDs are dimmed by APDM from 0% to 100%.For voltages from 12V up to 48VThe DMX-LED-Dimmer X9HRX operates with supply voltages from 12V up to 48V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HRX can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of loss DMX signalthe current state (HOLD) or predefined a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB/RGBW group.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 500Hz and 8000Hz via RDM.Adjustable Dimming CurveThe dimming curves can be configured individually for each output.RDM SupportThe DMX-LED-Dimmer X9HRX allows configuration by RDM via DMX.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.RGB-Status-DisplayThe device status is shown via the RGB status display.Firmware-Update-FunctionIn order to be able to use future functions, the DMX-LED-Dimmer X9HRX offersa firmware update function both via USB and RDM.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HRXand therefore ideally suited for switch cabinet installation. Specifications Power supply:12-48V DC 80mA@12V / 100mA@24V (without load) LED voltage:12-48V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-controlling and Curve-Definition 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels DMX-FAIL:Hold / 0%-100% Output:9 PWM-signal with 16Bit-resolution and APDM (Adaptive Pulse Density Modulation) common supply voltage Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) / 9x 240W (48V) Masterdimmer:None / Global / RGB / RGBW PWM frequency:500Hz / 1kHz / 2kHz / 4kHz / 8kHz CTRL Output:Control output for switching off the load power supply units (Energy-Save) StandAlone function:9 internal Stand-Alone programs Display:RGB LED Connections:Screw terminals Dimensions:99mm x 82mm Produkt DownloadsDMX-LED-Dimmer X9HRXBedienungsanleitung DMX-LED-Dimmer X9HRXUser Manual DMX-LED-Dimmer X9HRXUSB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9HRXFirmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit
Delivery time: on stock (1 day)
DMX-LED-Dimmer X9HRX+The DMX LED Dimmer X9HRX+ is a 9-channel LED driver with 16-bit grayscale adaptive pulse density modulation (APDM)and a high output frequency of up to 8kHz at the same time.Thanks to the special APDM technology in combination with the optimized 48V LED drivers,the DMX LED dimmer X9HRX+ is perfectly suited for controlling RGB, RGBW or even single-color W stripes.9 OutputsThe DMX-LED-Dimmer X9HRX+ has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A. So it is possible to connect a maximum loadof 120W (12V) / 240W (24V) / 240W (48V).High efficiencyThe 48V LED drivers are designed to allow the DMX LED Dimmer X9HRX+to operate without active cooling (no fan).0% up to 100% dimmableThe connected LEDs are dimmed by APDM from 0% to 100%.For voltages from 12V up to 48VThe DMX-LED-Dimmer X9HRX+ operates with supply voltages from 12V up to 48V.The LED voltage can be different per output so that one DMX-LED-Dimmer X9HRX+ can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of loss DMX signalthe current state (HOLD) or predefined a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB/RGBW group.Adjustable Output FrequencyThe output frequency at the LED outputs can be adjusted between 500Hz and 8000Hz via RDM.Adjustable Dimming CurveThe dimming curves can be configured individually for each output.RDM SupportThe DMX-LED-Dimmer X9HRX+ allows configuration by RDM via DMX.Free RDM-SoftwareTo set the parameters via RDM, our free RDM Configurator software is availableto download from our website www.dmx4all.de.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.Touch-ControlThe DMX-LED-Dimmer X9HRX+ is designed with 3 touch fields for operation and a 7-segment display.RGB-Status-DisplayThe device status is shown via the RGB status display.Firmware-Update-FunctionIn order to be able to use future functions, the DMX-LED-Dimmer X9HRX+ offersa firmware update function both via USB and RDM. Specifications Power supply:12-48V DC 80mA@12V / 100mA@24V (without load) LED voltage:12-48V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-controlling and Curve-Definition 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels DMX-FAIL:Hold / 0%-100% Output:9 PWM-signal with 16Bit-resolution and APDM (Adaptive Pulse Density Modulation) common supply voltage Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) / 9x 240W (48V) Masterdimmer:None / Global / RGB / RGBW PWM frequency:500Hz / 1kHz / 2kHz / 4kHz / 8kHz CTRL Output:Control output for switching off the load power supply units (Energy-Save) StandAlone function:9 internal Stand-Alone programs Display:7 segment display RGB LED Connections:Screw terminals Dimensions:105mm x 90mm x 60mm Produkt DownloadsDMX-LED-Dimmer X9HRX+Bedienungsanleitung DMX-LED-Dimmer X9HRX+User Manual DMX-LED-Dimmer X9HRX+USB DriverVersion 6.0.0.0 DMX-LED-Dimmer X9HRX+Firmware Software & ToolsDMX4ALL Software PackDMX / RDM / IP ConfiguratorWindows 32 & 64bit
Delivery time: on stock (1 day)
LED-Dimmer DR4The LED-Dimmer DR4 is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).Low-profile DIN-rail housing The LED-Dimmer DR4 is designed as a FLAT version, featuring a low-profile DIN-rail housing for space-saving installation.High Power OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.10 user defined color changes/programsThe LED-Dimmer DR4 offers more than 10 user defined color changes.These can be created via the web browser.RGB-LED-DisplayThe RGB LED displays the current operation status of the LED-Dimmer DR4 clearly.Mute able LED-Display The LED-Displays at the LED-Dimmer DR4 are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or App The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4 is controlled via Art-Net™, the DMX port can also be configured as a DMX output.Firmware-Update-Function To use future functions the LED-Dimmer DR4 offers a Firmware-Update-Function.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-Interface The LED-Dimmer DR4 has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
LED-Dimmer DR4+The LED-Dimmer DR4+ is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).DIN-rail housing The LED-Dimmer DR4+ is designed with a DIN-rail housing for mounting on a DIN rail.High Power OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.10 user defined color changes/programsThe LED-Dimmer DR4+ offers more than 10 user defined color changes.These can be created via the web browser.3 RGB-LEDsThe three RGB LEDs clearly indicate the current operating status of the LED-Dimmer DR4+.Mute able LED-Display The LED-Displays at the LED-Dimmer DR4+ are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or App The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4+ is controlled via Art-Net™, the DMX port can also be configured as a DMX output.Firmware-Update-Function To use future functions the LED-Dimmer DR4+ offers a Firmware-Update-Function.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-Interface The LED-Dimmer DR4+ has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
LED-Dimmer DR4FThe LED-Dimmer DR4F is a compact LED-Dimmer controlling 4 separate LED outputs.These can be used for RGB+W or for single, single-colored LED-Stripes.The LEDs connection occurs via screw clamps.Via a RJ45-Connection occurs the connection to Ethernet (ArtNet net work).Low-profile DIN-rail housing The LED-Dimmer DR4F is designed as a FLAT version, featuring a low-profile DIN-rail housing for space-saving installation.High Power OutputsThe outputs can drive a current of 10A.So, a load of maximum 120W (12V) or rather 240W (24V) results.10 user defined color changes/programsThe LED-Dimmer DR4F offers more than 10 user defined color changes.These can be created via the web browser.Mute able LED-Display The LED-Displays at the LED-Dimmer DR4F are disengageablevia ArtNet-Command (AcLedMute) or time-controlled.Most of all this is very helpful on stages to avoid disturbing “light-points”.Controlling via browser with Colorwheel or App The output control is available via an integrated web interface with a Colorwheel.Alternatively each other app which supports Art-Net can be used.DMX control The outputs can be controlled via either Art-Net™ or DMX.An adjustable priority determines which signal is to be used when both signals are present.If the LED-Dimmer DR4F is controlled via Art-Net™, the DMX port can also be configured as a DMX output.Firmware-Update-Function To use future functions the LED-Dimmer DR4F offers a Firmware-Update-Function.Easy configuration A user friendly configuration via a web browser allows a fast and uncomplicated settingof all parameters. No special software is necessary, a standard web browser is enough.So, the configuration is possible every time from PC, Smartphone or tablet.DMX4ALL Communication-Interface The LED-Dimmer DR4F has another communication interface which uses the DMX4ALL commands via TCP or UDP. Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
Tools & Equipment:
WAGO 221-2411 DurchgangsverbinderWith the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The 1-way through connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Number of poles:1 Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-2411 Manufactor:WAGO
Delivery time: on stock (1 day)
WAGO 221-412 Verbindungsklemme 2With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:2 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-412 Manufactor:WAGO
Delivery time: on stock (1 day)
WAGO 221-413 Verbindungsklemme 3With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:3 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-413 Manufactor:WAGO
Delivery time: on stock (1 day)
WAGO 221-415 Verbindungsklemme 5With the 221 series connection terminal, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The connection terminals can be opened particularly easily and quickly.Thanks to the specially designed operating lever, only minimal effort is required to open the 221.The connection is made completely without tools.In addition, the recessed grips on the side prevent slipping and ensure that the terminal is easy to hold while connecting the conductors.With the small connection terminal up to 4 mm², all types of conductors with different cross-sections can be clamped quickly and easily.The connectors connect fine-stranded conductors from 0.14 to 4 mm² as well as single and multi-wire conductors from 0.2 to 4 mm².The large connection area allows you to connect different types of conductors and bridge large differences in cross-section. Specifications Type:Connection terminal Assembly:5 conductors Rated current:32A Cross section flexible (max.):4 mm² Cross section flexible (min.):0.14 mm² Cross section rigid (max.):4 mm² Cross section rigid (max.):0.2 mm² Part number:221-415 Manufactor:WAGO
Delivery time: on stock (1 day)
WAGO 221-500 BefestigungsadapterWith the 221 series, WAGO enables tool-free wiring for all types of conductors.Clear handling and space-saving design make every application child's play.Simple, quick and safe handling.The mounting carrier is suitable for 2-, 3- and 5-conductor 221 Series Splicing Connectors (4 mm²). Specifications Type:Mounting carrier Suitable:for 2-, 3- and 5-conductor 221 Series Splicing Connectors Mounting type:DIN-35 rail Screw mount Color:Orange Part number:221-500 Manufactor:WAGO
Delivery time: on stock (1 day)
Power supply:
MEANWELL GST60A24-P1J (24V/2,5A/60W)- Desktop Power Supply- Universal input- Protected against short circuit, overload, overvoltage- Insulation class I- Low idle power- Energy efficiency level VI (DOE)- Manufacturer: MEANWELL- Manufacturer description: GST60A24-P1J Specifications Input voltage range:90...264V AC (47...63Hz) 135...370V DC Inrush, max.:65A Idle power, max.:0,075W Operating temperature range:-30...+70°C Cable length :1m Input connector:C14 (EN60320-1) Output connector:2,1x5,5mm Weight:305g Product DownloadsGST60ADatasheet
Delivery time: on stock (1 day)
MEANWELL HDR-150-24 (24V/6,25A/150W)- Direct assembly on DIN Rail- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit, over load, over voltage- Low no load power consumption- Power-on LED display- Insulation Class II- Manufactor: MEANWELL- Manufactor order code: HDR-150-24Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...6.25AOutput Power:150WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:70ARated Output Power:105...135%Operating Temperature Range:-30°C to +70°CUnit Weight:310gLength/Width/Height:54.5mm/105mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
MEANWELL HDR-60-24 (24V/2,5A/60W)- Small, staircase rail power supply, compact design, fanless design- Suitable for mounting on DIN standard mounting rails TS35/7 or TS35/15- Complies with the EU standard DIN EN 43880- Enclosed case, Touch-guard screw terminals- Universal input- Overload protection, current limiting, auto recovery- Protections: short circuit/over load/over voltage- Power-on LED display- Low idle power consumption- Insulation class II- Manufactor: MEANWELL- Manufactor order code: HDR-60-24Note:These power supplies are considered as a component that has to be installed in a final equipment. Specifications Input Type:1-Phase / Single PhaseInput Voltage Range:85VAC to 264VAC | 120VDC to 370VDCFrequency Range:47~63HzOutput Voltage:24VDCOutput Current:0...2,5AOutput Power:60WOpen Frame/Enclosed:EnclosedIsolation Voltage:3kVrmsInrush Current max.:30A/115VAC | 60A/230VACRated Output Power:105...160%Operating Temperature Range:-30°C to +70°CUnit Weight:190gLength/Width/Height:54.5mm/52.5mm/90mm Product DownloadsHDR-60Datasheet
Delivery time: on stock (1 day)
MEANWELL HLG-120H-24A (24V/5A/120W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-120H-24A Specifications Output voltage:24V (einstellbar: 22...27V) Output current, max:5A (adjustable 2,5...5A) Input voltage:90...264V AC (47...63Hz) 127...370V DC Input Inrush Current, max.:60A Operating Temperature:-40...+70°C Weight:1120g Produkt DownloadsHLG-120HDatasheet
Delivery time: on stock (1 day)
MEANWELL HLG-240H-24A (24V/10A/240W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-240H-24A Specifications Output voltage:24V (adjustable: 22,4...25,6V) Output current, max:10A (adjustable 5...10A) Input voltage:90...305V AC (47...63Hz) 127...431V DC Input Inrush Current, max.:75A Over Current Protection:95...108% Operating Temperature:-40...+70°C Weight:1300g Produkt DownloadsHLG-240HDatasheet
Delivery time: on stock (1 day)
MEANWELL HLG-320H-24A (24V/13,3A/319W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-320H-24A Specifications Output voltage:24V (adjustable: 21...26V) Output current, max:13,3A (adjustable 6,67...13,34A) Input voltage:90...305V AC (47...63Hz) 127...431V DC Input Inrush Current, max.:70A Over Current Protection:95...108% Operating Temperature:-40...+70°C Weight:1880g Produkt DownloadsHLG-320HDatasheet
Delivery time: on stock (1 day)
MEANWELL HLG-600H-24A (24V/25A/600W)- Universal input- Aluminium enclosure_ Overload protection, current limiting, auto recovery_ Protections: short circuit/over load/over voltage- Built-in active PFC function- Suitable for LED lighting and moving sign applications- EN61000-3-2, Class C, EN55015, EN61347-1, EN61347-2-13- IP65- Adjustable output voltage with internal potentiometer- Adjustable output current with internal potentiometer- Manufactor: MEANWELL- Order code: HLG-600H-24A Specifications Output voltage:24V (adjustable: 20,4...25,2V) Output current, max:25A (adjustable 12,5...25A) Input voltage:90...305V AC (47...63Hz) 127...431V DC Input Inrush Current, max.:70A Over Current Protection:95...108% Operating Temperature:-40...+70°C Weight:3900g Produkt DownloadsHLG-600HDatasheet
Delivery time: on stock (1 day)
SELF SLT75-24VFC-UN 24V/3,15A (75W)- Independent power supply - Class I protection, SELV output - Constant voltage - IP67 - Protected against over load, short circuit, over voltage and over temperature - EN61347-1, EN61347-2-13, EN55015, EN61000-3-2 etc. - For LED lighting applications - Manufactor: SELF ELECTRONICS- Manufactor order code: SLT75-24VFC-UN Specifications Output voltage:24V Output current, max:3,15A (0...3,15A) Input voltage:108...264V AC Input Inrush Current, max.:21,2A Operating Temperature:-25...+50°C Weight:230g Produkt DownloadsDatasheetUser Manual
This website uses cookies to ensure the best experience possible.