Die DMX4ALL GmbH ist ein Ingenieurbüro mit dem Produktschwerpunkt der Licht- und Steuerungs- technik basierend auf dem ARTNET,DMX512 und RDM Protokoll.
DMX STAGE-PROFI 1.1 RDM
€221.89*
47 available
Delivery time: 3-5 Tage
- Direct from the manufacturer
- dispatch within 24 hours on weekdays
-
Made in Germany -
Made in Europe - technical support
PayPal 
Pay Later 
SEPA direct debit 
Pay upon invoice 
Google Pay 
Apple Pay 
Credit or debit card 
Bancontact 
eps 
iDEAL 
OXXO supported by Paypal 
Przelewy24 
Paid in advance 
Cash on delivery 
Bar 
Invoice plus payment extension fee 
EC Kartenzahlung Zahlung bei Abholung 
Kredit- oder Debitkarte bei Abholung Product information "DMX STAGE-PROFI 1.1 RDM"
 DMX STAGE-PROFI 1.1 RDM (XLR3) |
The DMX STAGE-PROFI 1.1 RDM is a compact bidirectional Ethernet Gateway (DMX via Ethernet), which
can be used for Art-Net™ / TPM2 / USB to DMX / sACN to DMX / RDM or DMX to Art-Net™.
Via a standard RJ45 net work connection the connection to ethernet net work occurs.
Switchable DMX direction
The DMX direction can be switched according to usage.
Settable DMX frame rate
In the DMX-OUTPUT mode the DMX frame rate is adjustable, so this interface is compatible to "slow" DMX devices.
RDM via Art-Net™
Supports RDM via Art-Net™ and thus enables connected RDM devices to be configured via Art-Net™ using corresponding software.
Muteable LED display
The LED-Display at the DMX STAGE-PROFI 1.1 RDM is disengageable via Art-Net™-Command (AcLedMute)
or time controlled. This is very helpful to avoid disturbing “light points” on stage.
DHCP
The DMX STAGE-PROFI 1.1 RDM has a DHCP function for automatic addressing in the network.
Internal stand-alone programs 
The internal programs make the DMX STAGE-PROFI 1.1 RDM a stand-alone device. The programs can be called
up via the web interface, when the device is switched on, or when Art-Net™ data is missing.
Easy Configuration
A user-friendly configuration via a web browser allows a fast and uncomplicated setting of all parameters.
No special software is required, a normal web browser is sufficient. Thus, the configuration at any time
from your PC, smartphone or tablet device.
DMX-Monitor
The DMX monitor is available via the web interface. This means that the current DMX values
can be displayed and checked simultaneously without any additional software.
DMX-Fader
The DMX fader is available via the web interface. This allows the DMX values to be output to be set without additional software.
Easy Network Configuration
For easy setting of the IP-address, we provide the IP Configurator as a PC tool or Android app available for free.
This allows you to leave the network settings unchanged and can easily configure the IP.
High quality and Compact Design
The DMX STAGE-PROFI 1.1 RDM is designed with a 3-pin Neutrik-XLR-Connection metal design and cased in an aluminium housing.
Art-Net™ Merge-Function
Two Art-Net™ sources are output by LTP (Latest) or HTP (Highest) combined to the DMX output.
Combinable with WiFi components
In combination with a WLAN bridge the DMX STAGE-PROFI 1.1 RDM can also be integrated into WLAN net works.
Firmware update function
To use future functions the DMX STAGE-PROFI 1.1 RDM offers a Firmware-Update-Function.
This can be started with any web browser, so no direct access to the device is necessary!
DMX4ALL Communication-Interface
The DMX STAGE-PROFI 1.1 RDM has an additional communication interface using the DMX4ALL-Commands via TCP or UDP packages.
Art-Net ™ Designed by and Copyright Artistic Licence Holdings Ltd.
| Specifications |
| Power supply: | 5V DC via attached external power supply |
| Connection: | RJ45 Ethernet |
| USB Mini-B | |
| Neutrik® XLR3 | |
| Ethernet: | 10 Mbit/s | 100 Mbit/s |
| DMX: | Selectable: |
| - 512 channels OUT | |
| - 512 channels IN | |
| DMX-Framerate: | Adjustable (5 - 44 fps) |
| RDM: | RDM via Art-Net™ (switchable on/off) |
| ArtDmx Fail: | HOLD last data |
| (DMX-OUT) | CLEAR all to 0% SET all to 100% NO OUTPUT DEFAULT VALUES |
| SET all to 100% | |
| NO OUTPUT | |
| DEFAULT VALUES | |
| INTERNAL PROGRAM | |
| DMX Fail: | HOLD last data |
| (DMX-IN) | CLEAR all to 0% |
| SET all to 100% | |
| NO OUTPUT | |
| DEFAULT VALUES | |
| Protocol: | Art-Net™ (downwards compatiblel) |
| Ethernet-VCP (Virtual COM Port) | |
| USB-VCP (Virtual COM Port) | |
| TPM2 | |
| sACN (Unicast) | |
| DMX4ALL-Commands via TCP, UDP, VCP | |
| Internal program: | User-configurable stand-alone program |
| Status LED: | Green: Ethernet Connection |
| Yellow: Datatransfer | |
| Dimensions: | 75mm x 26mm x 35 mm |
| Produkt Downloads |
| Software & Tools |
Windows 32 & 64bit
DMX-Configurator V2
Bedienungsanleitung
DMX-Configurator V2
User Manual
IP Configurator (ArtNet Produkte)
Windows 32 & 64bit
IP Configurator
Anwendungshinweis
IP Configurator
Application Note
DMX4ALL Commands
DMX4ALL Commands for Third-Party Developers
RDM Configurator (ArtNet Produkte)
Windows 32 & 64bit
RDM Configurator
Bedienungsanleitung
RDM Configurator
User Manual
DMX4ALL GmbH
Reiterweg 2A
Germany
WEEE DE37841650
+49 2327 2204600
kontakt@dmx4all.de
WarningPlease note that all installation, service and maintenance work may only be carried out by qualified specialists.
Attention, the appliance is not a toy and must not be allowed to fall into the hands of children.
Waste disposalElectrical and electronic products must not be disposed of with household waste. At the end of its service life, the product must be disposed of in accordance with the applicable legal regulations and local conditions.
We recommend the following for this product:
Neutrik NA3MM3 pole XLR male - 3 pole XLR male (gender conversion adapter) Features & Benefits- Versatile, pre-wired and ready to use adapters to reliably interlock various connector systems- Professional look and compact space saving design, based on the XX Series- Rugged diecast shell for best reliabilityTo use with: - ArtNet-DMX STAGE-PROFI 1.1 (using DMX-INPUT mode) Specifications Manufactor:NEUTRIK Title:NA3MM Connection Type:Adapter
Delivery time: 3-5 Tage
Neutrik NA3M5F3 pole XLR male - 5 pole XLR female for lighting (DMX) applicationsFeatures & Benefits- Compact XLR 3 to 5 pole adapter for lighting (DMX) applications- Solve interconnection problems of the 3-pole and 5-pole DMX standard- Professional look and compact space saving design, based on the XX Series- Rugged diecast shell for best reliabilityTo use with: - ArtNet-DMX STAGE-PROFI 1.1- ArtNet-DMX UNIVERSE 4.1- NanoDMX USB-Interface[TAB:Specifications] Specifications Manufactor:NEUTRIK Title:NA3M5F Connection Type:Adapter
Delivery time: 3-5 Tage
HICON SGHN-0100-SW XLR-Kabel 1m 3polSommer Cable SGHN-0100-SWThe Stage 22 Highflex is a high-quality, very reasonably priced cable with awire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket.It is filled with PVC almost all the way to the core and allows for excellent reeling.We supply it with HICON HI-X3CM or HI-X3CF XLR connectors, with a 6-fold strain relief.- Outside diameter 6,4 mm, 2x 0,12 mm²- 1 XLR-plug 3pin to 1 XLR-jack 3pin- Length: 1 m Specifications Length:1m Manufactor:Sommer cable Partnumber:SGHN-0100-SW Name:Stage 22 Highflex Inner conductor:2x 0,22 mm² Connector:HICON Type:XLR 3-pol female / XLR 3-pol male
Delivery time: 3-5 Tage
€22.00* (14.09% saved)
HICON SGHN-0500-SW XLR-Kabel 5m 3polSommer Cable SGHN-0500-SWThe Stage 22 Highflex is a high-quality, very reasonably priced cable with awire gauge of 2 x 0,22 mm² (AWG 24) and a 6.4 mm thick supersoft PVC jacket.It is filled with PVC almost all the way to the core and allows for excellent reeling.We supply it with HICON HI-X3CM or HI-X3CF XLR connectors, with a 6-fold strain relief.- Outside diameter 6,4 mm, 2x 0,12 mm²- 1 XLR-plug 3pin to 1 XLR-jack 3pin- Length: 5 m Specifications Length:5m Manufactor:Sommer cable Partnumber:SGHN-0500-SW Name:Stage 22 Highflex Inner conductor:2x 0,22 mm² Connector:HICON Type:XLR 3-pol female / XLR 3-pol male
Delivery time: 3-5 Tage
€29.50* (13.59% saved)
XLR-Kabel 10m 3polMicrophone and symmetric connecting cable- 2 cores shielded SCHULZ Kabel MK 6- Braided shield- Outside diameter 6 mm, 2 x 0,12 mm²- 1 XLR-plug to 1 XLR-jack- Length: 10 m Specifications Length:10m Manufactor:DMX4ALL Cable:SCHULZ Kabel MK 6 Connector:SCHULZ Type:XLR 3-pol female / XLR 3-pol male
Delivery time: 3-5 Tage
XLR-Kabel 15m 3polMicrophone and symmetric connecting cable- 2 cores shielded SCHULZ Kabel MK 6- Braided shield- Outside diameter 6 mm, 2 x 0,12 mm²- 1 XLR-plug to 1 XLR-jack- Length: 15 m Specifications Length:15m Manufactor:DMX4ALL Cable:SCHULZ Kabel MK 6 Connector:SCHULZ Type:XLR 3-pol female / XLR 3-pol male
Delivery time: 3-5 Tage
You might also be interested in:
DMX-LED-Dimmer X9The DMX-LED-Dimmer X9 is especially designed for controlling RGB LED-Stripes.The dimmer has 9 PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9 has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9 operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9 can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.RDM supportThe DMX-LED-Dimmer X9 allows configuration by RDM via DMX.LED-State DisplayThe DMX state is indicated via the LED status.Stand-Alone FunctionAs an alternative to DMX control, internal color sequences can be called upvia the address switch without external DMX control.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9. Specifications Power supply:7-24V DC 80mA@12V / 100mA@24V (without connected LED load) LED voltage:7-24V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-controlling DMX-FAIL:Hold / 0%-100% Output:9 PWM-signal with 8Bit-resolution Common supply voltage Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) PWM-Frequency:244 Hz Energy-Save output:Control output for switching off the load power supply units StandAlone function:9 internal StandAlone programs Connections:Screw terminals Dimensions:99mm x 82 mm Product DownloadsDMX-LED-Dimmer X9Bedienungsanleitung DMX-LED-Dimmer X9User Manual
Delivery time: 3-5 Tage
DMX-LED-Dimmer X9HRThe DMX-LED-Dimmer X9HR is especially designed for controlling RGB LED-Stripes.The dimmer has 9 High-Resolution PWM-Outputs (3xRGB) independently controllable via DMX.9 OutputsThe DMX-LED-Dimmer X9HR has 9 outputs to which LEDs can be connected.All outputs are designed in the same way so single color, RGB or RGBW LEDs can be connected.High Power OutputsThe outputs can drive a current up to 10A.So it is possible to connect a maximum load of 120W (12V) / 240W (24V)0% bis 100% dimmableThe connected LEDs are dimmed by PWM from 0% to 100%.For voltages from 12V up to 24VThe DMX-LED-Dimmer X9HR operates with supply voltages from 12V up to 24V. The LED voltage canbe different per output so that one DMX-LED-Dimmer X9HR can control different LED systems.DMX-FAIL FunctionAn adjustable DMX FAIL function offers the option to get in case of lostDMX signal the current state (HOLD) or assuming a preset value.DMX-Master DimmerOptionally, another DMX channel can be activated as Master Dimmer (all outputs)or one master dimmer per RGB group. The global master dimmer is fixed atDMX address 1 and can be used as system master dimmer.Adjustable dimming curveThe dimming curves can be configured individually for each output.RDM supportThe DMX-LED-Dimmer X9HR allows configuration by RDM via DMX.SubDevice-ModeIn SubDevice mode, each output is assigned its own DMX address and DMX FAIL behavior via RDM.LED-State DisplayThe DMX state is indicated via the LED status.Firmware-Update-FunctionTo use future functions, the DMX-LED-Dimmer X9HR offers a firmware update function.Top hat rail housing availableThe top-hat rail housing 1050 is available as accessory for the DMX-LED-Dimmer X9HR. Specifications Power supply:7-24V DC 80mA@12V / 100mA@24V (without load) LED voltage:7-24V DC (no AC voltage !) Protocol:DMX512 RDM DMX channels:9 channels with 8Bit-Mode 18 channels with 16Bit-Mode + optional Master-Dimmer-Channels Masterdimmer:None / Global / RGB / System DMX-FAIL:Hold / 0%-100% 8bit ModePWM-Frequency 488 Hz with LookUp-Table 2 kHz or 4 kHz without LookUp-Table 16bit ModePWM-Frequency 488 Hz without LookUp-Table Output:9 PWM-signal common supply voltage anode (PLUS) Output current:max. 10A each output In sum 90A with all GND connections Output power:9x 120W (12V) / 9x 240W (24V) Energy-Save output:Control output for switching off the load power supply units StandAlone function:9 internal StandAlone programs Connections:Screw terminals Dimensions:99mm x 82 mm Produkt DownloadsDMX-LED-Dimmer X9HRBedienungsanleitung DMX-LED-Dimmer X9HRUser Manual DMX-LED-Dimmer X9HRUSB Driver (ab V2.2)Version 6.0.0.0 DMX-LED-Dimmer X9HRFirmware (ab V2.2) Software & ToolsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual
Delivery time: 3-5 Tage
DMX-Analog 0-10V 8-KanalThe DMX 0-10V Interface is especially designed to switch not-DMX-suitable devices with an analog input.On the output 8 analog signals with 0-10V output voltage are available.Each output is controllable via a DMX-channel and divided in 256 steps.A output driver on each channel allows loads up to 10mA. Specifications Power supply:12-24V DC Current consumption:50mA@12V; 40mA@24V (without connected load) Protocol:DMX512 RDM DMX channels:8 channels DMX-FAILHold / 0-100% Output:8 outputs with driver each max. 10mA Resolution:256 steps (8-Bit), linear Connections:screw terminals Dimensions:64mm x 82 mm Product DownloadsDMX-Analog 0-10V 8-KanalBedienungsanleitung DMX-Analog 0-10V 8 channelUser Manual
Delivery time: 3-5 Tage
DMX-Relais/Analog 4The DMX-Relais/Analog 4 is designed for switching loads of several kinds.Four potential free contacts with up to 8A switching power are available.Additional four analog outputs with 0-10V or 1-10V can be used to control systems with analog inputs.This relay outputs are suitable for switching DC or AC voltage.A DMX FAIL function hold the relays and analog states unchanged or switch off at a loss of DMX signal. Specifications Power supply:12-24V DC / 250mA Input:4 up to 12 DMX-channels Output:4 switching contacts (close) each max. 8A / 250V~ (165A/20ms Switch-on peak current) 4x analog output 0-10V / 1-10V DMX-FAIL:Hold / Off Connectors:screw terminals Dimensions:99 x 82mm Product DownloadsDMX-Relais/Analog 4Bedienungsanleitung DMX-Relais/Analog 4User Manual
Delivery time: 3-5 Tage
Tools & Equipment:
5 Port Ethernet Switch NS200The unmanaged Industrial Ethernet switches from LogiLink are particularly suitablefor use in harsh environments thanks to the extended temperature range of -40°C to 80°C.These robust and compact devices enable the connection of several end devices.Due to their flexibility and simplicity, these switches are not only suitable for industrial applications.- Industrial switch, 5-port, 10/100Base-TX RJ45- Unmanaged, easy installation, plug-and-play- Compact and rugged metal housing, IP40- Free fall, shock and vibration stability- Power input: 12 to 52 V DC redundant power- Suitable for DIN-rail mounting- Extended operation temperature: -40 °C - +80 °C
Delivery time: 3-5 Tage
5 Port Gigabit Ethernet Switch DGS-105The DGS-105 5-Port Gigabit Unmanaged Desktop Switch offers an economical way for SOHO and small and mediumbusinesses to benefit from the increased bandwidth of Gigabit Ethernet.It provides five Gigabit ports for easy expansion of your network and a quick way to upgrade your network to Gigabit connectivity.- 5x Gigabit Ethernet ports- Plug & play for instant connectivity
Delivery time: 3-5 Tage
8 Port Gigabit Ethernet Switch DGS-108The DGS-108 8-Port Gigabit Unmanaged Desktop Switch offers an economical way for SOHO and small and medium businessesto benefit from the increased bandwidth of Gigabit Ethernet.It provides eight Gigabit ports for easy expansion of your network and a quick way to upgrade your network to Gigabit connectivity.- 8x Gigabit Ethernet ports- Plug & play for instant connectivity
Delivery time: 3-5 Tage
Power supply:
Steckernetzteil 5V/1,5A Mini-USB- Plug-in switching power supply with europlug- Universal input- Protections: short circuit/over load- Insulation Class II- Low no load power consumption- Meets DOE VI- Manufactor: HN-ELECTRONIC- Manufactor order code: HNP06-MINIUSBL6 Specifications Output voltage:5V Output current, max:1,5A (0...1,5A) Input Voltage:90...264V AC (47...63Hz) Input Inrush Current, Max.:30A No Load Power Consumption, Max.:0,075W Operating Temperature:-10...+40°C Cable Length:1,5m Output Plug:Mini-USB Produkt DownloadsHNP06-MINIUSBL6Datasheet
Delivery time: 3-5 Tage
Software:
DMX-Configurator FREE-VersionThe controlling software DMX-Configurator 4PIXX represents a user friendly surface to create light scenes (programs). Up to 8 DMX-universes can be used which can be represented as pixel-matrix.A live operation with a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export to DMX4ALL DMX-Player and SD-Card-Player. All in all, in many areas an application will be possible.The FREE-Version is available as download for free and has the following functions.Range of function:1 DMX OUT universeArtNet SupportCue-ListRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to create LED-Pixel screensPreview for LED-Pixel screensRemote Manager (MIDI / TIMER / DMX)Secutity functions: Password protected programming fileExport/Import of scenesExport/Import of stepsExport for NanoSD Player / ArtNet-Player 4 / DMX-Player S/L/ONELimits of FREE-Version:Multi Interface Support with 16 DMX universes can be used with up to 2 scenesTOUCH-Mode (Time limited)No secutity functionsNo hardware secutity functionsSpecifications Operating system:Windows® 7, Windows® 8 Software-Updates:Available as download Produkt DownloadsDMX-ConfiguratorWindows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote
Delivery time: 3-5 Tage
DMX-Configurator PRO-VersionThe controlling software DMX-Configurator represents a user friendly surface to create light scenes (programs). Up to 16 DMX-universes can be used which can be represented as pixel-matrix. A live operationwith a connected DMX4ALL DMX- or Pixel-Interfaces will be possible as well as an export toDMX-Player and SD-Card-Player. All in all, in many areas an application will be possible. The BASIC-Version use a USB-Dongle needing a free USB-slot. The Dongle can be used on several computer and is easy usable for service tasks. Range of functions:16 DMX OUT + 16 DMX-IN universesMulti Interface SupportCuelistArtNet SupportRecord FunctionArtNet Sync RecordingLoop Find FunctionDevice Manager to generate LED-Pixel for lines and screensPreview for LED-Pixel for lines and screensTOUCH-ModeRemote Manager (MIDI / TIMER / DMX)Export/Import of scenesExport/Import of stepsExport for AvengerSD / NanoSD Player / ArtNet-Player 4 / ArtNet MultiPixxPlyer 16 / DMX-Player S/L/ONESecurity functions: Optional password for programming fileHardware secutity functions: Program execution can be limited by using the hardware serial number Important InformationPlease note that the software is excluded from change and return ! ArtNet Player 4 Operating system:Windows® 7, Windows® 8, Windows® 10 PC-connections:USB 1.1 / USB 2.0 Scope of delivery:USB-Dongle with PRO-Licence DMX4ALL lanyard with dongle holder Software-Updates:Available as download Produkt DownloadsDMX-Configurator V2Windows 32 & 64bit DMX-Configurator V2Bedienungsanleitung DMX-Configurator V2User Manual DMX-Configurator PRO-VersionUSB Driver Application NotesAufnahme von Art-NetAppNote Importieren von Jinx! SzenenAppNote Aufnahme eines DMX SignalsAppNote
Delivery time: 3-5 Tage
RDM-ConfiguratorDie Software RDM-Configurator ist eine PC-basierte Konfigurationssoftware für RDM-Geräte.Der RDM-Configurator ist eine Software, die es erlaubt RDM fähige Geräte zu konfigurieren.RDM steht für Remote Device Management und ermöglicht eine bidirektionale Kommunikationzwischen den verbundenen RDM fähigen Geräten.Einstellungen von RDM-Geräten (z.B. Startadresse) können per RDM aus der Distanz und ohnedirekten Zugriff auf das Gerät vorgenommen werden. Zur Verwendung von RDM wird einRDM fähiges Art-Net™-RDM Gateway benötigt.Sobald sich das RDM-Gerät im System befindet, können aufgrund der eindeutigen UID diegeräteabhängigen Einstellungen aus der Distanz per RDM-Befehl erfolgen.Ein direkter Zugriff auf das Gerät ist nicht notwendig.Abhängig vom verwendeten RDM-Gerät variieren die per RDM einstellbaren Eigenschaften.Funktionsumfang:Übersichtliche BenutzeroberflächeMulti Art-Net™-Gateway SupportArt-Net™-Gateway KonfigurationMulti DMX/RDM-Port SupportBenutzerfreundliche Klartext RDM-ParametereinstellungRDM DiscoverRDM GET-ParameterRDM SET-ParameterDMX4ALL MSC-Parameter (Manufacturer Specific Command)RDM SubDevice-SupportRDM Sensor-SupportDMX-Fader PanelDMX-MonitorFREE-Version Beschränkungen:RDM SET-Parameter bei nicht DMX4ALL-RDM-GerätenSpeichern und Wiederherstellen von DMX-Parametern über KonfigurationsdateiAutoRefresh der RDM SensorenFastDMX-AddressingFür die beschränkten Funktionen (Setzen von Parametern in nicht DMX4ALL-RDM-Geräten)ist eine optional erhältliche Lizenz notwendig.Für die Lizenz wird ein DMX4ALL RDM-Gateway benötigt, auf dem der Lizenz-Keygespeichert wird. Technische Daten Betriebssystem:Windows® Software-Updates:als Download verfügbar Produkt DownloadsRDM-ConfiguratorBedienungsanleitung RDM-ConfiguratorUser Manual RDM-ConfiguratorSoftware
Delivery time: 3-5 Tage
RDM-ConfiguratorDie Software RDM-Configurator ist eine PC-basierte Konfigurationssoftware für RDM-Geräte.Der RDM-Configurator ist eine Software, die es erlaubt RDM fähige Geräte zu konfigurieren.RDM steht für Remote Device Management und ermöglicht eine bidirektionale Kommunikationzwischen den verbundenen RDM fähigen Geräten.Einstellungen von RDM-Geräten (z.B. Startadresse) können per RDM aus der Distanz und ohnedirekten Zugriff auf das Gerät vorgenommen werden. Zur Verwendung von RDM wird einRDM fähiges Art-Net™-RDM Gateway benötigt.Sobald sich das RDM-Gerät im System befindet, können aufgrund der eindeutigen UID diegeräteabhängigen Einstellungen aus der Distanz per RDM-Befehl erfolgen.Ein direkter Zugriff auf das Gerät ist nicht notwendig.Abhängig vom verwendeten RDM-Gerät variieren die per RDM einstellbaren Eigenschaften.Funktionsumfang:Übersichtliche BenutzeroberflächeMulti Art-Net™-Gateway SupportArt-Net™-Gateway KonfigurationMulti DMX/RDM-Port SupportBenutzerfreundliche Klartext RDM-ParametereinstellungRDM DiscoverRDM GET-ParameterRDM SET-ParameterDMX4ALL MSC-Parameter (Manufacturer Specific Command)RDM SubDevice-SupportRDM Sensor-SupportDMX-Fader PanelDMX-MonitorZusätzliche Funktionen mit Lizenz:RDM SET-Parameter bei nicht DMX4ALL-RDM-GerätenSpeichern und Wiederherstellen von DMX-Parametern über KonfigurationsdateiAutoRefresh der RDM SensorenFastDMX-AddressingFür die Lizenz wird ein DMX4ALL RDM-Gateway benötigt, auf dem der Lizenz-Keygespeichert wird.Wichtig: Zur schnellen Bearbeitung bitte im Check-Out die Seriennummer des Geräts in den Bemerkungen angeben! Technische Daten Voraussetzung:DMX4ALL-RDM Gateway Betriebssystem:Windows® Software-Updates:als Download verfügbar Produkt DownloadsRDM-ConfiguratorBedienungsanleitung RDM-ConfiguratorUser Manual RDM-ConfiguratorSoftware
Delivery time: 3-5 Tage
RDM-ConfiguratorDie Software RDM-Configurator ist eine PC-basierte Konfigurationssoftware für RDM-Geräte.Der RDM-Configurator ist eine Software, die es erlaubt RDM fähige Geräte zu konfigurieren.RDM steht für Remote Device Management und ermöglicht eine bidirektionale Kommunikationzwischen den verbundenen RDM fähigen Geräten.Einstellungen von RDM-Geräten (z.B. Startadresse) können per RDM aus der Distanz und ohnedirekten Zugriff auf das Gerät vorgenommen werden. Zur Verwendung von RDM wird einRDM fähiges Art-Net™-RDM Gateway benötigt.Sobald sich das RDM-Gerät im System befindet, können aufgrund der eindeutigen UID diegeräteabhängigen Einstellungen aus der Distanz per RDM-Befehl erfolgen.Ein direkter Zugriff auf das Gerät ist nicht notwendig.Abhängig vom verwendeten RDM-Gerät variieren die per RDM einstellbaren Eigenschaften.Funktionsumfang:Übersichtliche BenutzeroberflächeMulti Art-Net™-Gateway SupportArt-Net™-Gateway KonfigurationMulti DMX/RDM-Port SupportBenutzerfreundliche Klartext RDM-ParametereinstellungRDM DiscoverRDM GET-ParameterRDM SET-ParameterDMX4ALL MSC-Parameter (Manufacturer Specific Command)RDM SubDevice-SupportRDM Sensor-SupportDMX-Fader PanelDMX-MonitorZusätzliche Funktionen mit Lizenz:RDM SET-Parameter bei nicht DMX4ALL-RDM-GerätenSpeichern und Wiederherstellen von DMX-Parametern über KonfigurationsdateiAutoRefresh der RDM SensorenFastDMX-AddressingFür die Lizenz wird ein DMX4ALL RDM-Gateway benötigt, auf dem der Lizenz-Keygespeichert wird.Wichtig: Zur schnellen Bearbeitung bitte im Check-Out die Seriennummer des Geräts in den Bemerkungen angeben! Technische Daten Voraussetzung:DMX4ALL-RDM Gateway Betriebssystem:Windows® Software-Updates:als Download verfügbar Produkt DownloadsRDM-ConfiguratorBedienungsanleitung RDM-ConfiguratorUser Manual RDM-ConfiguratorSoftware
Delivery time: 3-5 Tage